So the winter time has come, snow fell. Thanks to the thaws and cold, ice was formed on pedestrian paths. In order not to fall, people came up with many options so that the shoes do not slip. Further in more detail.
Content
- How to make with glue, sand, so that boots, boots do not slip: tips, life hacks
- How to make with sandpaper so that the shoes do not slip in winter: tips, life hacks
- How to make with screws so that boots, boots do not slide in winter: tips, life hacks
- How to make with a patch, bilateral tape so that shoes do not slip in winter?
- How to make with the help of an old nylon stocking so that shoes do not slip in winter?
- How to make linen or flannel fabric so that shoes do not slide in winter?
- How to make a soldering iron so that shoes do not slip in winter?
- How to make a rubber lining so that the shoes do not slide in winter?
- How to make with a special overlage of ice floors so that shoes do not slide in winter?
- How to make a shoe workshop so that shoes do not slip in winter?
- Video: Other tips and life hacks so that shoes do not slip in winter?
In winter, snow and ice can, both delight people and vice versa, cause injury. Most of adolescents rarely think about it - they like to walk in the fresh air, visit rinks, play snowballs, etc. But for older people, the winter time is associated with the danger of falls, injuries due to slippery paths and poor winter shoes. Even the most beautiful boots may not withstand a real test on a well -icated snowy coating. That is why people's craftsmen try various methods, how to make shoes not slippery.
How to make with glue, sand, so that boots, boots do not slip: tips, life hacks
If you are unlucky with boots and your sole even glides on a snowy road, then with the help of improvised means you can correct this drawback. To do this, prepare the glue - preferably "Moment", ordinary sand, degreasing liquid. And do the following:
- Acetone or alcohol degrease the sole.
- Apply the moment to the surface, wait until it dries slightly.
- After that, pour the sand directly onto the places greased with glue, expect until this whole applique froze.
- This is enough for about a month of wearing in frost. Thirty days later, you can repeat the process.
![Not slippery sole with your own hands](http://heaclub.ru/tim/f8fbdda879b16366d6cfd2d7dff6448a/ne-skolzkaya-podoshva-svoimi-rukami.jpg)
If you are not afraid to spoil the boots, then fuse sand into their sole. It will be enough only to heat it within five to a thousand minutes in a pan or baking sheet. And then on hot sand put the shoes with the sole. The grains of sand due to high temperature will remain on the surface of the sole.
IMPORTANT: Make sure that the base of the boots when heated does not melting more than necessary, especially if it is not high.
How to make with sandpaper so that the shoes do not slip in winter: tips, life hacks
There are many more recommendations on this subject, and not everyone can suit you. Each method has its own positive, negative aspects. A simple option is an anti -slip platform processed sandpaper. It is enough to rub the product and feel free to go outside. That's just roughness is not always effective in falling. Repeat the process every time before going out. Therefore, the method is not used often.
![Fighting against ice](http://heaclub.ru/tim/360a4c973221be25b09d5f33d255706e/nazhdachka-protiv-gololeda.jpg)
How to make with screws so that boots, boots do not slide in winter: tips, life hacks
Now it is not a problem to buy ready -made ice steps, but if a man has golden hands, then making an anti -slip surface on shoes is not a question. You just need to buy screws and screw it into the sole one by one.
True, with such shoes it will not be quite comfortable to walk indoors, metro, supermarket. She will make a knock and can scratch the floor, but you will not fall on the street.
![Screws so that the shoes do not slip](http://heaclub.ru/tim/831ae311b5e5d815f1f42a0a613197e5/shurupi-chtobi-obuv-ne-skolzila.jpg)
How to make with a patch, bilateral tape so that shoes do not slip in winter?
When there is nothing at hand, but there is a pharmacy nearby, then an ordinary patch will save you from falling for a while. The only disadvantage is that it quickly opens from the surface of the sole. All efforts become useless during long walks. The patch is enough for a few hours of walking no more.
![The patch will save from the slippery road](http://heaclub.ru/tim/ca98536c33a86a7f500c45d57b382088/plastir-spaset-ot-skolzkoi-dorogi.jpg)
How to make with the help of an old nylon stocking so that shoes do not slip in winter?
The next device is well kept on the surface of the tread even in slush. We are talking about kapron tights. So that they stick to the wedge, set fire to tights, they will begin to melt and drip. Put these drops to the sole. And do a few drops per one place to get tubercles.
![How not to fall if slippery?](http://heaclub.ru/tim/c364a31ed67d1fd007c0f183fb6564ca/kak-ne-upast-esli-skolzko.jpg)
How to make linen or flannel fabric so that shoes do not slide in winter?
Various types of tissues also prevent shoe sliding. For such purposes, flannel, linen, felt and others are suitable. You can make a slippery sole in just a few hours. It all depends on how long the glue will freeze.
You will need to do the following:
- Cut four felt shreds.
- Glue on the toe, heel of the platform with shoe glue.
- When the glue dries, you can go even on ice in such boots and not be afraid of bruises.
![Flannel, felt against sliding winter shoes](http://heaclub.ru/tim/000b239a7b97b5e097dc28ad5c083a27/flanel-voilok-protiv-skolzheniya-zimnei-obuvi.jpg)
IMPORTANT: If the fabric is glued with small pieces on the surface of the wedges, then your boots will be stronger to keep the clutch with slippery road.
How to make a soldering iron so that shoes do not slip in winter?
If you have high -sole shoes, but it slides, then you can correct this drawback using a conventional soldering iron. Heat the power tool and draw a pattern on the surface. The deeper the furrows of this art turn out, the less the danger will fall on the icy coating of the sidewalk.
![How to use a soldering iron against slippery shoes?](http://heaclub.ru/tim/fef25ab138f6426d293010906166f5bc/kak-ispolzovat-payalnik-protiv-skolzkoi-obuvi.jpg)
IMPORTANT: Make the furrows neatly so that the sole of the boots in the future, everything is just as reliably protecting your legs from the cold.
How to make a rubber lining so that the shoes do not slide in winter?
If there is no desire to independently improve shoes, then you can use the offers of manufacturers. Moreover, there are many of them now. You can even buy anti -icing overlays for any boots, boots and heeled shoes in a supermarket. Dressing such a lining, it will no longer be scary to walk along the most slippery roads.
![Rubber overlays for winter shoes](http://heaclub.ru/tim/7da593d1ea41c6f9a76d9c3b8f4a80ab/rezinovie-nakladki-dlya-zimnei-obuvi.jpg)
IMPORTANT: Even with any overlays, if you do not follow the walking rules in slippery areas, you can still fall. Therefore, do not make wide, too confident steps in ice. Move slowly, choose not the most slippery areas for walking, look under your feet, do not make sudden movements.
How to make with a special overlage of ice floors so that shoes do not slide in winter?
Owners of beautiful model shoes sometimes have a hard time in ice. After all, such boots, boots, as a rule, are not done with a thick sole. Therefore, in order not to fall, it will not hurt to buy special devices - ice glass. They are almost invisible to half -saps, but you will feel confident.
![Ice lane for shoes](http://heaclub.ru/tim/0ee586a903b13c3f9aa954d43180b091/ledostupi-dlya-obuvi.jpeg)
Women who do not imagine how to walk without heels can also find ice traffic for themselves - they are universal. At the same time, their beautiful gait will not change.
![Women's boots with heels](http://heaclub.ru/tim/d7735157d78c3544d9cea1c663a6998e/nasadki-na-zhenskie-sapogi-s-kablukami.jpg)
How to make a shoe workshop so that shoes do not slip in winter?
The above methods may not be arranged. Some are not entirely sure that they are effective, others do not want to do this, in their opinion - it is better to go to the workshop. There, experts will stick a rubber sticker with a good tread, which can protect from any fall.
And for a higher cost you can stick a “tread” even better. Not only does the shoes will noticeably slide, also the view of such boots will be attractive.
![Not slippery sole on winter boots](http://heaclub.ru/tim/592b5e765d5eb6e295921e2fd68db963/ne-skolzkaya-podoshva-na-zimnih-botinkah.jpg)
So that there are no problems with the sole in the winter, it is best to pay attention to the material used for its manufacture. For such a season, a corrugated, soft wedge or a polyurethane platform is ideal. And, of course, the quality of the shoes plays an important role.
go with a ski stick