In this article, we will talk about how to make a unique hanger for clothes on your own.
Content
- Ideas of hangers in the hallway with my own hands: photos, tips
- How to make a floor-standing standing bedside-rack for clothes made of wood: drawings, instructions, photos
- Make a children's hanger from PVC pipes
- Make a wall hanger from plywood for clothes, bags, hats
- Ban for towels in a bathroom made of metal and wood under the old days
- Make a hanger for keys
- Make a belt hanger
- Hooks for hanger: how to make
- A simple master class for beginners in making a hanger:
Not only the theater begins with the hanger, but also the ordinary house of each person. This is the subject of the interior that guests first see, trying to place their things. So why not emphasize your personality, making some original hanger with your own hand?
Ideas of hangers in the hallway with my own hands: photos, tips
Regardless of what the idea of \u200b\u200bdesigning hangers will be, they will fasten in some of the following methods:
- Screws - a classic way
- Glue
- Suction cups
- Magnet
Important: preference should be given to the classical version, as it is reliable and allows you to withstand impressive loads.
Well, now it's time to get inspiration! So, several ideas:
How to make a floor-standing standing bedside-rack for clothes made of wood: drawings, instructions, photos
For the manufacture of such a hanger We need:
- Wood and steam plates about 16 mm thick
- The edge is about 0.5 mm thick. She can be, for example, melaminova
- The rotary mechanism as the base of the product - it will allow the hanger to turn, while maintaining about 110 kg
- Confirmates
- Self -tapping screws
- Lobby
- Sandpaper
- Confirmates in size 5x70 mm
You can start work:
And to be guided in its process is recommended for the following drawing:
The rotary mechanism must be placed between the lower supports on self -tapping screws 4x16 mm. Fix the rotary mechanism by formation through holes of 10 mm below the support.
Important: as for the preparation of parts, it should be noted that their angles must be equal to 90 degrees. Therefore, if there are no good woodwork skills, it is better to entrust this business to professionals.
In the ends you need to prepare a drill holes for confirmation. The depth should be set approximately in 60 mm.
Do not forget about the edge: the adhesive base must be attached to the end. Then you need to process the edge with an iron. While it cools down, it is advisable to press this area with a rag. The extra parts of the edge are removed with sandpaper or knife.
In order for the assembly of the hanger does not cause questions, we offer the attention of readers the following scheme:
Make a children's hanger from PVC pipes
From PVC pipes, you can make such a convenient children's hanger-stand:
For its manufacture we need:
- Pipe 20 length 1.25 m
- Pipe 25 length 2.60 m
- The tee 20 in the amount of 7 pcs.
- The tee 25 in the amount of 6 pcs.
- The tee of the format is 25/20/25 in the amount of 2 pcs.
- The plug 20 in the amount of 7 pcs.
- The plug is 25 in the amount of 6 pcs.
- The adapter of the format 25/20 in the amount of 2 pcs.
- Format angles 45 - 2 pcs.
- Special glue designed for PVC pipes
- Scissors that can cut plastic pipes
- Roulette, ruler, Sedenzirkul is desirable
- Soldering iron
- Pencil or marker
It only remains collect in a single design all the details. If you do this correctly, you get a stable hanger on which the child can hang not only clothes, but also a backpack, a headdress.
Important: it is worth assembling first separate modules, and only then collect them in a large structure. In this case, it will always be possible to correct the error at any stage.
Make a wall hanger from plywood for clothes, bags, hats
For the manufacture of such a cake in the form of a cat we need:
- Plywood sheet
- Hooks on which things will hang and a board for them
- Lobby
- Paints of those shades that will correspond to the idea
You can start work:
- First you need to depict a contour The future cat
- Now in more detail muzzle and paws loosen
Important: they need to be drawn separately from the main circuit.
- Lobby all the details are cut From plywood
- Now you need combine all the details, as well as insert hooks in pre -made holes for them
- The final stage - Coloring a cat
Ban for towels in a bathroom made of metal and wood under the old days
For the manufacture of such a hanger necessary:
- The finished metal ring - it can be purchased in a needlework store. Or such a ring can be made independently from thick wire
- Wood beads - a large diameter of about 20 mm is preferred
- Dye and container for its breeding, spoon
Important: preferably, that the capacity is made of plastic.
- A piece of skin
- Screw
- Paper towels
- Glue, ruler, scissors
- Rubber gloves
The procedure is as follows:
First of all, you need work with a ring. If it is bought whole, you will have to disconnect it with the help of nippers.
- Now you need stroke beads on a metal basis. They are strung until free space disappears.
- Next is recommended cover the working surface paper towels or, in the event of their absence, newspapers.
- Now you can mix water and dye in plastic containers. By the way, you can choose such a shade that the effect of the old tree is created.
Important: the dye should be mixed thoroughly until completely dissolved.
- For starters, it is worth it test the resulting shade On any one extra bead. If the resulting color turned out to be excessively dark, it is worth fixing this with the addition of water, and if too light - paints.
- Now you can dear the ring into the container.
- It is recommended that when getting a workpiece from the container, slightly hold the first above the table - you need to drain the paint. Still better give the workpiece to dry On a paper towel.
- Preferably after that rinse the beads under running water.
- And again you need to give them time dry.
- Now you can start fastening. At the desired height the screw is driven.
- Then leather Need to cut 2 stripes 10 cm Each.
- On each edge of the stripes it is necessary make holes.
Important: at least a centimeter should retreat from the edges.
- Now you need combine everything. A ring is threaded into the holes of the stripes, and the strip, in turn, is attached to the screw. It turns out such a design as in the picture. In this case, it is advisable to connect the strip with the screw with glue, otherwise it can fall.
Make a hanger for keys
In order to create an elegant hanger for keys from a wooden bar, you will need:
- The bar itself - its dimensions can reach approximately 2.5x5x14 cm. These parameters are ideal for placing four keys. Accordingly, if you want to create a more spacious hanger, you need to choose a larger bar.
- Fasten elements for shelves in the amount of 2 pcs. Dimensions should be agreed with the parameters of the bar
- A thick lace
- Little rings with fences
- Pendants, keychain
- Ruler, pencil
- Ples and pliers
- Drill, grinding machine, saw
Important: a wonderful solution will be the acquisition of a multifunctional Dremel 8050 Micro tool.
You need to make a hanger like this:
- To start The bar is polished. At the same time, the rough disk is primarily used, and then - medium and smooth.
- Further, with a pencil follows Design the places for fasteners.
- With the help of engraving incisors, it is necessary make recesses for approximately 3 mm.
- Where there will be an opening in the elements, it is worth doing another recess of 3 mm.
- Now suspensions must be attached to the bar and fix it With screws.
- It was all the back of the future hanger. Now you need on the opposite front side Cut four parallel lines.
Important: their depth should be approximately a centimeter.
- Now you can fix the bar on the wall.
- You need to attach small rings to the keys From the calculation "One ring per key."
- Further To each ring you need to attach a piece of lace, The opposite end of which will be attached to the keychain.
- It only remains put on the laces in the recesses on the bar. A keychain in this case will act as a latch.
Make a belt hanger
You can make such a hanger from plywood from a thickness of about 3 to 6 mm. Also suitable Oriented-brown slab 50 cm in length and 30 cm in width.
The procedure is as follows:
- It is desirable for the material draw a grid, Each of the squares of which will have dimensions of an average of 50 mm. With the help of such a grid, it will be much easier to transfer the stencil.
Important: it is necessary that the hook is above the center of gravity of the hanger.
- Now you can mind the contours of the hanger With all holes. By the way, on such a device it is quite convenient to place not only belts, but, for example, scarves - under them it is worth providing round holes.
- Next is needed drink the inner holes. The diameter should be at least 5-10 mm, Otherwise, it will be problematic to introduce a jigsaw.
- Now remains work out holes with a jigsaw.
- And then you can do and external contours.
- It is worth remembering about careful grinding of the product Both outside and from the inside. As for grinding from the inside, it is most convenient to use a cloth tape. Its optimal width is from 8 to 15 mm.
Important: no burrs, roughness should not remain!
- It is necessary and lay it Future hanger. After applying and drying each layer of varnish, desirable grind the product againas burrs can form. When there are no burrs after the next layer of varnish, you can consider the work complete.
Hooks for hanger: how to make
A good idea will be manufacturing kryuchkov from cutlery. Suitable exclusively hardware, since nothing will come of excessively harsh or fragile.
Be sure to stock up on the following things:
- Protective equipment in the form of glasses and gloves
- Devices that will help bend the fork, spoon - grip, hammer, steel wire
- A drill that can work for metal
- Kusachki
- With a screw
Important: if there is no certainty that drilling can be acquired. But only strong, industrial.
The order of work is as follows:
- A fork or spoon is needed Bend approximately in the middle. This should be done carefully. If you can’t manipulate manually, you can use the devices described above. By the way, at the fork you can bend the cloves in accordance with the idea.
- On a piece of woodto which the hooks are planned, it costs make markings.
- Then you need to drill holes in the marked places bar, as well as on a fork or spoon.
- Left connect Fork with bar.
Hooks can also be made from the following items:
Even such an ordinary part of the interior as a hanger can transform it beyond recognition. Indeed, from the little things, a unique author's style is created. In addition, such things, made with your own hands, bring comfort.