Needlework-Shibori technique: master classes, photos, ideas. Shibory jewelry: necklace, earrings, bracelet, brooch

Needlework-Shibori technique: master classes, photos, ideas. Shibory jewelry: necklace, earrings, bracelet, brooch

In this article, we will talk about the popular and insanely beautiful needlework technique, which is called Shibory.

Do you know that the name of the incredibly beautiful Japanese technique of needlework "Shibori" appears in VIII century? Only this was called at that time not the very technology of weaving with ribbons, but the method of staining tapes. These ribbons were so loved by people that in the XIV century they were wore even commoners. But today we will talk about weaving.

Necklace using Shibory technique: master class, photo

In the technique of Shibory, you can make an amazingly tender necklace that will match even the brides. To make such a miracle you need:

  • Shibori-Lent-approximately 15 cm
  • Contain cord - preferably choose an option turkish production. It is easy to work with him due to the fact that it does not cause any difficulty to prick him

IMPORTANT: In this case, the Turkish cord is hard enough to ensure that the product will keep shape well in the future.

  • Kaboshone stones-2 identical oval and 1 in the shape of a drop. They must harmonize with the tape
This may look like cabins for the future product using Shibori technique
This may look like cabins for the future product using Shibori technique
  • Beads - it must be represented in various sizes and a variety of palette
  • Beads and glass pearls - preferably czech production
  • Fetr - than tougher, all the better
  • Skin - it is needed exactly natural
  • A thread for working with beads, a scuffle line, the so-called "jewelry cable"-it is necessary to purchase something from this list. Better yet - all together
  • Clasp
  • Devices that will help transfer the pattern - it can be transparent plastic and permanent marker or cardboard and copy paper
  • Scissors, needle, sewing pins, glue.

You can start making jewelry:

  • It all starts with sketch.
This is what a sketch for a necklace from Shibory looks like
This is what a sketch for a necklace from Shibory looks like
  • Sketch transferred any of the above methods and cut out.
  • Each of the above numbered petals is tolerated on a hard felt and circled.
  • On the back of the felt workpieces also numbers are affixed.
  • Felt leaves cut.

Important: you need to consider allowances.

  • Now you need to cut it out from the tape pieceswhich are suitable for the manufacture of petals of the future flower.
  • These pieces fixed On the front areas of felt using pins.
Fixation of Shibory tapes
Fixation of Shibory tapes
  • Further the threads are sewn with the seam "forward needle" On the lateral parts of felt pieces. To the edges of the tape remained smooth, they need bend under the seam.
It turns out such a Shibori-jacket
It turns out such a Shibori-jacket
  • So that the seams are not visible, they need beautifully disguise with beads. This can be done, guided by the following scheme, in which 1.1. - The conclusion of the needles to the front side, 1.2. - stringing beads, 1.3. - The output of the needle on the wrong side. Also 2.1. -The appearance of the needle between the 1st and 2nd beads and the conclusion in the 2nd. Next, 2 more beads are processed, and the needle is displayed by the inside - this 2.2. and 3.1. Now you need to retreat 3 beads and bring the needle to the front side - this 3.2. Then you need to put the needle in 3 beads and add 2 new ones, returning again to the 3rd. Thus the entire edge is stitched.
Here is a scheme for a given-chiro product
Here is a scheme for a given-chiro product
It turns out such petals for the chibori necklace
It turns out such petals for the chibori necklace
  • Further petals between each other sew.

Important: the tails of ribbons must be removed to the wrong side.

Stitched with each other petals-shibory
Stitched with each other petals-shibory
So the tails of Shibori-tone are displayed
So the tails of Shibori-tone are displayed
  • Further on this wrong side is attached a piece of felt.
Fetter fastening to the inside of the Shibori Podelka
Fetter fastening to the inside of the Shibori Podelka
  • And on the front side you need to glue the beautiful kaboshon stone.
Such a cabochon is perfect for this Shiberi-East.
Such a cabochon is perfect for this Shiberi-East.
  • Next is the cabochon it is sheathed with beads According to the schemes below.
This is how the product is sheathed
This is how the product is sheathed
It turns out such a Shibory-flower
It turns out such a Shibory-flower
  • It is also possible to process the core Add more beads.
  • Now it is taken round cabochon. He it is tightened with a mesh and tightened with a cord cord. The cord first is scorched by a lighter, and then sewn with a seam "Forward with a needle."
It turns out such a blank for the Shibori-ozerel
It turns out such a blank for the Shibori-ozerel
  • Now it is sewn through beads another cord cord.
Another cord for the details of the future Shibori-Onerel
Another cord for the details of the future Shibori-Onerel
  • Similarly processed another couple of cabochons. They all sewn to the flower.

Important: they are sewn thanks to the tails of a cord cord extending from the cabochon.

This is what the Shibory-flower looks now looks like
This is what the Shibory-flower looks now looks like
  • Now the turn has come cinema leaves. For one leaf will be needed 3 cord cords. They are superimposed on each other and sewn. In this case, you need to do excess Through some bead. The seam is performed "Forward Needle."
So the leaf for the Shiberi-Tsvetka is made
So the leaf for the Shiberi-Tsvetka is made
  • Now a leaf sewn To the wrong side of the flower. If desired, the sheet can be decorated with beads at hand.
This is how the sheet is sewn to the Shibori-flower
This is how the sheet is sewn to the Shibori-flower
  • Now it is taken coboson in the shape of a drop. It needs it glue To the felt and to sheathe beads by analogy with other cabochons.
This is how the cabshon-frame is sheathed for the future necklace-shyborriy
This is how the cabshon-frame is sheathed for the future necklace-shyborriy
  • A piece is sewn on the wrong side skin.
  • Cabochon fasten To the flower.
This is what the cabshon-firepower sewn to the Shiberi-flower looks
This is what the cabshon-firepower sewn to the Shiberi-flower looks
  • Next is sheathed another oval cabochon.

IMPORTANT: But its wrong side is not processed at this stage.

Another processed cabochon for the chibori necklace
Another processed cabochon for the chibori necklace
  • Now this cabochon can attach To the main part of the necklace. Fasteners are carried out through beads. Only then is sewn on the wrong side felt.
It turns out such a Shibori-flower
It turns out such a Shibori-flower
  • But now you can make a sheet from a chibori tape. To do this, the tape is cut off, folded in half and sewn diagonally.
It turns out such a workpiece for Shibori-editions
It turns out such a workpiece for Shibori-editions
  • It turns out a sheet that needs turn out, fill with cotton wool, and then Sew To the cabin and decorate.
Leaflet and cabochon for Shibori-priest
Leaflet and cabochon for Shibori-priest
  • The result of the resulting workpiece is attached Special cable For jewelry. On him pearls are strung from glass and the fastener is attached. The necklace is ready!
This is how the cable is attached to the chibory necklace
This is how the cable is attached to the chibory necklace
Such a chibory necklace is obtained in the end
Such a chibory necklace is obtained in the end

Shirori technique earrings: photos, master class

You will need:

  • The tape itself is about 10 cm
  • Busins-bicons, rivoli beads, crooked beads, ordinary beads
  • The felt is simulated
  • Sucking artificial or skin - they will come in handy for the inside
  • Subtles, scissors, needles, glue
  • Shvenza fasteners and metal ring

Important: the ring should be unusual.

You can proceed to manufacture. To start bus-rivoli are braided. This is easy to do: you need to make a knot on the thread and string beads on it. Then you need to go through the needle in the very first bead, thereby closing the circle.

So begins the manufacture of Sereg-shibory
So begins the manufacture of Sereg-shibory
  • Now goes second row. Only the needle does not fit into every bead, but through one - chess order. At the end of the work, the needle is threaded in two neighboring beads.
The second row of beads for the part of the future-chibori
The second row of beads for the part of the future-chibori
  • Similarly formed the third row. Then you need a needle go down And sew there a number of beads of a different color. Again in a checkerboard pattern.
It turns out such a workpiece of the details of future Sereg-shibory
It turns out such a workpiece of the details of future Sereg-shibory
  • Then you need a circle a little squeeze, leaving the needle up. In such a frame and it is placed rivoli.
Braided bead for earrings
Braided bead for earrings
  • It's time to start manufacturing petals. They are cut out of tracing paper, and then applied to the felt. And cut out of it.

Important: the workpieces should turn out to be mirrored.

Bulletin for petals in Shibori technique
Bulletin for petals in Shibori technique
  • Now you can take up tape. Cut off Two pieces, and both they are attached to patterns.
It turns out such a petal - the future earrings -chibory
It turns out such a petal-the future earrings-shibory
  • To the petal A braided bead is sewn.
Harvesting for Sereg-shibory
Harvesting for Sereg-shibory
  • Now petals sheathed with beads and biconuses - In a word, they are decorated. Can decorate The petals around the perimeter, or you can bizarre folds.
This is what the chibori petal looks like
This is what the chibori petal looks like
  • It was the turn the inside - From the material selected for her, a suitable piece is cut out With allowances. But before the inside becomes part of the earring, you need to attach jewelry to the top The ring, to which Schwenza will be attached.
This is how the ring is attached to the chibory earrings
This is how the ring is attached to the chibory earrings
  • Next is a piece suede Fastened by glue to the earrings. On allowances beads are sewn.
This is how the fasteners of the inside out for future Siberia earrings
This is how the fasteners of the inside out for future Siberia earrings
  • To the ring is attached SchwenzaWhy the latter must be slightly unclenched with thin roots.

Important: and then it is no less accurately necessary to return to Schwenz to the previous form.

Such delicate shibory earrings are obtained
Such delicate shibory earrings are obtained

Shiroburi technique: master class, photo

To create a brooch using the Shibori technique in the form of an elegant bow is needed:

  • Shibori-love about 14 cm long
  • Large rhinestones, beads, pearl beads, pendant of pear -shaped outlines
  • VETRAREMENTETE VETRAL, Metal Bookpiece Harco
  • Hot variety of glue, threads

The manufacturing process is as follows:

  • To start About 30 beads are typed on the thread. They are closed in the circle.
  • The mosaic option is made several layers rings.
This is how the workpiece for the future brooch-shibory looks like
This is how the workpiece for the future brooch-shibory looks like
  • The ring should in the end place the rhinestones.
  • After placing the rhinestone, it needs Turn over The wrong side up. And then braid with beads From the inside.

Important: but you do not need to close the rhinestones completely.

  • Then the rhinestones turn over again on the front side and braided with beads of another shade In a checkerboard pattern.
  • Next, you can create bead cloves, decorated from above beads.
Stir-up rhinestones
Stir-up rhinestones
  • But there are no limits to perfection! Rhinestones can be sheathed closer to the middle by some even number of beads so that they are formed peculiar rays. Each ray is 4 beads.
Rhinestone
Rhinestone
  • It was the turn of the design bath from the tape. The tape bends in half Cutters inside. Then the tape gathering with a needle and a thread “into an accordion”. This will be the first part of the bow.
Tape processing for the future Bant Shobory
Tape processing for the future Bant Shobory
  • This part It is attached to a piece of felt.
This is how the workpiece for the Shibory Bantic looks
This is how the workpiece for the Shibory Bantic looks
  • Similarly sewn the second part of the bow. BUT the middle decorated with decorated rhinestones.

Important: the rhinestone should be located exactly in the center.

This is what a bow-shibory looks like
This is what a bow-shibory looks like
  • Now from the bow the thread is givento which beads, beads and suspension are strung.
This is what the brooch-shibory looks from the outside.
This is what the brooch-shibory looks from the outside.
  • On the back With the help of an adhesive pistol is attached Black for brooches With a fastener.
And so the shyborri brooch looks from the inside
And so the shyborri brooch looks from the inside

Bracelet using Shiroburi technique: master class, photos

Also, a graceful bracelet can be created from Shiroburi tapes. He needs:

  • Special Shibori-Lent
  • The basis for the metal bracelet
  • Various beads, beads, crystals of Swarovski
  • Monophy and lavsan
  • The skin is genuine and felt in a thickness of approximately 1 mm
  • Scissors, glue

You can proceed to skill. A pattern is applied to felt future bracelet, and on this pattern It is sewn with a mono -ribbon.

Harvesting for a chibori bracelet
Harvesting for a chibori bracelet

It was the turn book the rivoli bead. To do this, you need to go through the needle is a double thread, And on her string The required amount of beads.

Important: the needle at the end should be put into a loop that was formed from the very beginning.

Such a workpiece for Shibory-Bralet is formed from beads
Such a workpiece for Shibory-Bralet is formed from beads
  • Now familiar mosaic method Formed Another bead row.
Another row for Shibori Bralet
Another row for Shibori Bralet
  • Chess order will need to be processed two more rows. But already another bead.
Continuation of the formation of the workpiece for the Shibori Bralet
Continuation of the formation of the workpiece for the Shibori Bralet
  • Now you can already insert Rivoli Busin and some Bend her wrong side.
Rivoli inserted for Shibori Bralet
Rivoli inserted for Shibori Bralet
  • After the first rivoli is processed, and behind it by analogy and second, They follow sew on the sides of the tape on a piece of felt.
So rivoli sew up to the workpiece for Shibory-Bralet
So rivoli sew up to the workpiece for Shibory-Bralet
  • Now a felt billet is needed suture with beads along the edges. Use a seam "Back Needle."
Lining the outer contour of the future Shibori-scrap
Lining the outer contour of the future Shibori-scrap
  • The same type of seam is processed and inner contour Bracelet, that is, you need to sheathe the tape.
Lining the future Shibory-Bralet from the inside
Lining the future Shibory-Bralet from the inside
  • Next is worth it fill out voids Inside the future bracelet. They will help in this beads and beads, which will be shown in random order.

Important: the process of filling the voids will be similar to the collection of mosaics - there should not be a heap in the end.

Filling out the area of \u200b\u200bthe future Shibori Bralet
Filling out the area of \u200b\u200bthe future Shibori Bralet
  • If desired, you can do another bead circuit Bracelet. Then An excess part of the felt is cut off.
Such a workpiece is formed for the future Shibori bracelet
Such a workpiece is formed for the future Shibori bracelet
  • Now a piece is cut out of the skin, which is equal to the existing embroidered workpiece. But from the edges it costs step back a centimeter or two.
Shiberi-billet of leather
Shiberi-billet of leather
  • Next is necessary attach a blank to a metal basis For a bracelet. But before that it is very important bend the base from the center to the edges. You can use the subject of a cylindrical shape for this purpose. If you process the worship of the wagon on the bent surface, the tapes will remain the same wavy.
Basket for Shibori Bravelet and Harvesting
Basket for Shibori Bravelet and Harvesting
  • Now embroidered The workpiece is glued to the base.Then the leather piece is also glued. Everything should thoroughly striking with glue. The edge of the craft it is sheathed with beads.
This is how the edge of the Shiberi-Bralet is sheathed
This is how the edge of the Shiberi-Bralet is sheathed
This is how the Shiberi-Broject turns out
This is how the Shiberi-Broject turns out

Ideas for crafts in Shibori technique: photo

We offer for inspiration to the attention of readers the ideas of crafts made using the Shibory technique:

Summer Bright Shibori-Coarse and Bracelet
Summer Bright Shibori-Coarse and Bracelet
Tender Shibori-oglier
Tender Shibori-oglier
Delicate white-blue Shiberi-brushes
Delicate white-blue Shiberi-brushes
Bright Shibori-sergi
Bright Shibori-sergi
Such a Shibori-Koral will decorate even a business blouse
Such a Shibori-Koral will decorate even a business blouse
Shibori
Shibori
Brooch-chibory in the form of a bug
Brooch-chibory in the form of a bug
Chill-chibory in brown tones
Chill-chibory in brown tones
Shibory jewelry are beautiful even in black
Shibory jewelry are beautiful even in black

If you ask fans of Shibori technology about what the type of needlework likes most of all, almost everyone will answer, which is unique. Each product is uniquely delicate and sophisticated.

Video with a master class on the manufacture of a bracelet using the Shibori technique:



Author:
Evaluate the article

Add a comment

Your e-mail will not be published. Mandatory fields are marked *