Weaving from newspaper tubes for beginners step by step: weaving technique, master class, photo. Weaving baskets, caskets, newspapers for beginners: schemes, bends, photos

The article will tell you how to create beautiful crafts from improvised material - newspaper tubes.

Weaving from newspaper tubes for beginners step by step: weaving technique, master class, photo

Weaving from newspaper tubes almost completely replaced the weaving from the vine recently. The fact is that getting this material is much easier than breaking willow branches or look for a voyage for weaving. In addition, you don’t have to spend money, because even if a pack of television programs or advertising publications did not lie in your house, you can always ask your loved ones.

Important: a thin long tube is spinning from the newspaper sheet, which is the main material. The tube is fastened with ordinary PVA or dry pencil glue. Moreover, it is not necessary to lubricate the entire sheet. This can only be done on the corner of the newspaper.

In the case when you should lengthen your newspaper tube, you just insert the blanks one into one and plant them on glue, continuing weaving. So you can glue the tubes almost to infinity, creating, both small caskets and large vases with human growth.

There are several weaving techniqueswhich depend on which product you create and what you want to make a pattern. In weaving, it is important to use schemes and patterns so that the picture is beautiful and neat. In cases where the “sucker” does not get a finger, you should use ordinary metal knitting or hook.

At the end of weaving (for example, on the edge of the product), you should tie the twigs so that they bend inside. There you can put them on glue or wrap them so that the end is not visible. The finished product is usually covered with paint. To do this, it is advisable to use an acrylic paint or from a spray can, it is resistant to moisture. After drying, it is advisable to open the product with one or two layers of varnish.

Product weaving technique, scheme:

Video: "Seven types of weaving"

How to make trumpets from weaving newspapers?

Any weaving begins with the preparation of the material, which means that many newspaper tubes should be prepared in advance. To twist a beautiful and even tube, you should use a long wooden skewer (for barbecue) or thin metal knitting needle.

It is this subject that you put the basis of the newspaper sheet and twist the tube. Due to several layers of paper, it will be quite dense and suitable for creating wicker products. Carefully lubricate the corner of the newspaper with glue so that it can firmly stick and the tube is strong.

Video: "Twisting of newspapers: nuances and secrets"

Where to start weaving a basket of newspapers?

After you prepare a sufficient number of tubes, you should start choosing the shape of the product: square, round, rectangular, heart and so on.

You should decide what the bottom of the product will be. There are two options:

• The bottom of the cardboard
• Pipe

The cardboard bottom is suitable for small products (caskets and boxes). Large (trays, boxes, boxes) should be weaved independently. Any weaving should be performed in clear accordance with the scheme. In order for the weaving to be neat, the ends of the tubes should be attached with clothespins, pinching them to the form.

Description of weaving bottom:

• Cross together 8 tubes (photo 1)
• Start weaving in a circle, bending each tube clockwise (photo 2 and 3).
• Weaving should last until you reach the necessary diameter of the bottom.
• Lengthen the tubes, inserting a new one (photo 4) every time)
• Prepare a binding form
• Raise the tubes and fix them with clothespins to the edge of the shape (photo 5 and 6).
• Lengthen the tubes and continue weaving in a circle

Video: "Conductive from newspaper tubes: master class"

How and how to paint newspaper tubes for weaving a basket?

It is better to paint newspaper tubes after the product is completely completed. If you paint them in advance, you risk violating their good flexibility, making them not supple, which will completely spoil the weaving.

The finished product should be covered with acrylic or machine paints. Such paints are moisture resistant and do not flow in contact with water. The paint can be applied in any way: with a brush, sponge, a spray gun, a spray gun, an airbrush. Acrylic paints mix perfectly and you can always choose the necessary shade and color from them.

Important: after the paint is dry, the product should be opened with a layer (or two layers) of varnish. This will allow the product to find glossy shine and become much stronger.

Photos of finished products:

Simple bending of the edge when weaving from newspapers: scheme, photo

A simple bend is a simple way to weave products from newspaper tubes. Such weaving will master any beginner in this matter. Weaving is based on the bend of the twigs, intertwined in one direction (see the diagram).

Video: "The simplest bends"

Weaving from newspaper tubes - bending rod: diagram, photo

Weaving the bend of the “rod” should be on vertical columns from newspaper tubes. The bend is made on the principle of weaving baskets from the vine.

Weaving from newspapers: volumetric bending

The weaving “volumetric bend” is necessary for the beautiful completion of the weaving of the product to make it a curly and voluminous edge in the form of a braid. Such weaving is suitable for knitting VAZ, pots for flowers, boxes and boxes. To make such weaving in the strength of each needlewoman, using step -by -step work in photos and schemes.

Weaving from newspapers: bending lazy pigtail

The bend of the "lazy pigtail" is a simple way to complete any knitted product. All weaving is built on the principle of plexus of twigs in one braid and its maintenance throughout the edge of the product.

Weaving from newspapers: bending "Isid"

Such a bend is simple and ease of weaving. The edge is not voluminous and narrow. Weaving is suitable for completing knitting caskets.

Weaving from newspapers: double bending

Double bend is suitable for weaving baskets to create a beautiful and voluminous edge to them. Such a bend is also similar to the principle of braid weaving.

Weaving from newspapers: Fupid is complicated

A complex bend will certainly decorate, woven from newspaper tubes, baskets and boxes, boxes and vases. Weaving it is much more difficult, since the exact follow of the scheme is required.

Weaving from newspapers: bending of the edge, ending of the product

The beautiful completion of weaving (that is, the "bend") will make the product very neat and aesthetically beautiful. You can use any schemes to weave a beautiful edge.

Video: "Rod bend"

How to weave baskets, caskets, boxes?

Weaving miniature products (boxes and caskets) should be formed by forming a product in a given form. To do this, use any signs of the preferred size. As for any product, prepare a sufficient number of tubes and decide what the bottom will be: wicker or from cardboard. After that, fix the tubes and start weaving, focusing on the diagram and pattern.

How to weave basket pens?

The creation of a basket of newspaper tubes begins with weaving the main part and only then do you separately make a pen that is woven into the product. You should symmetrically note two opposite edges of the basket and insert several rods of newspaper tubes into them (about 8 pieces). Prutics are bent and the pen is weaved according to the type of braid (or look at the weaving patterns). On both sides, there should be exactly the same parts of the handles that are connected together and tied.

Baskets, caskets, boxes, weaved newspapers: photo

View photos of finished products from newspaper tubes to get a portion of inspiration to create your own crafts. If you are a beginner in this matter, do not rush to immediately grab for volumetric work, a basket, for example, start with a small box.

Video: "Crafts from newspaper tubes for beginners"