Alteration of old furniture with your own hands: ideas, diagrams, description, photo before and after

Options and ideas of alterations of old furniture.

Content

Soviet furniture is distinguished by its reliability, as well as quality. That is why many owners are in no hurry to part with furniture, despite their incompetent appearance. If you belong to such people, we suggest you make an alteration of old furniture.

How is the alteration of old furniture carried out?

The basis remains the same, solid, but the appearance changes and becomes modern. There are many approaches to the alteration of old furniture, which depend on the surface of the surface, as well as your preferences.

How is the alteration of old furniture is carried out:

The simplest option is to past the surfaces of a self -adhesive film. To do this, it is necessary to perform several simple preparatory manipulations. It is necessary to disassemble the furniture on the blocks, and thoroughly wash with the use of soapy water to remove the remaining fat.
Now, in a bucket of warm water, a glass of vinegar dissolves and this mixture is also wiped with all doors, surfaces that are served. For restoration, you need to take a self -adhesive film.
Now on sale there are a lot of options that differ in cost, as well as drawing. There are both glossy and matte options that are perfect for the kitchen and bedrooms.
After the surface is dried, it is necessary to cut a self -adhesive film into the segments of the desired size. It is best to take pieces of 5 mm less than the size of the site. This will allow you to fix the film well, and will impede its further departure from the furniture.
Next, it is necessary to remove the protective paper from one edge and attach to the furniture. Do not rush to immediately tear off the entire paper from a self -adhesive segment. Thus, you can catch the bubbles under the bottom, which will ruin the appearance.
Further, with translational movements, using a rag or roller, gradually remove the protective paper from the bottom up and press the film to the surface. If you still have not been able to avoid the appearance of the bubbles, take a needle, pierce the bubble and move the entire air from the edges to the center of the hole.
Just rub the hole with a rag. When all the elements are glued, it is necessary to lay out the cotton fabric on top and iron it with a slightly warm iron. Under the influence of temperature, the glue becomes very liquid, all the bubbles and folds are leveled, and it is possible to achieve perfect pasting.

Alteration of the old furniture with your own hands using modern accessories

Of course, new modern accessories will help to add highlights. It can be purchased in any store that is engaged in assembling, making furniture. Furniture can be chrome, matte or glossy. Or under the old days, if you like this kind of furniture.

After that, you can glue the ends with special chrome ribbons. It is also sold in furniture stores, and is often used for edging the ends. As a result, you will receive an updated option, which will play in a new way and fit even into the room with modern repair.

Alterations of old furniture with your own hands: photo

There is a more economical option for remaking old furniture- this is Using wallpaper. It is enough for about 5 years. To do this, prepare the surface, thoroughly wash it.

Options for remaking old furniture with your own hands:

If there is a glossy coating of varnish on top, it is best to cover the surface with a primer. After that, it is necessary to soak the wallpaper with glue and press to the surface. It is usually leveled with a foam roller, after such manipulations are left until completely dry.
Please note that the wallpaper is subjected to mechanical influences, can easily scratch. Therefore, they must be covered with two layers of varnish on top. It is best before covering the nightstand, try to use this varnish on an unnecessary piece of wallpaper.
The fact is that some products change their color after applying varnish. If you do not want the surface to turn yellow, use transparent, colorless varnish. It is usually made on a polyurethane basis.
Please note that furniture must be covered with two layers, and perpendicular to each other. That is, if one was applied in width, then the second is applied in length. After that, you can change the fittings and glue decorative overlays.

Ideas for remaking old furniture with your own hands

Please note that you can use polyurethane molding to update old furniture. They are sold in any store of accessories and repair. To do this, you need to perform several preparatory work. The surface of the furniture is skinned with a grinder with a circle, or ordinary sandpaper. Next, it is necessary to completely remove all the accessories and carefully remove the dust.

Ideas for remaking old furniture with your own hands:

After that, the surface is washed, dried, applied, a primer layer is applied. All cracks, seizures are sealed with putty. Further, polyurethanemoldovs. Usually they are frames that glue around the perimeter of furniture nodes.
Usually the decor is placed on the door or on the nightstand. Glue is carried out using PVA glue or on liquid nails. When the glue dries, it is necessary to perform staining. It is produced using water -based paint.
Further, it remains to engage in filling, that is, the middle that remained betweenmolden. For these purposes, you can use any suitablenon -woven wallpaper.
Products with a thin pattern and light shine are ideal. After everything is dry, it is necessary to cover the furniture with two layers of varnish. The last, final stage, is the attachment of new accessories, that is, pens. You can replace the legs with modern wheels.

Alteration of old Soviet furniture

You can improve furniture and turn the old coffee table into a work of art. Oddly enough, ordinary wrapping paper is suitable for this. To carry out manipulation, it is necessary to thoroughly wash the surface of the table.

Alteration of old Soviet furniture:

If it is lacquer, treat it with a primer. After that, PVA glue is applied to the paper, applied to the surface and torn with a foam roller.
Do not rush to cut wet pieces of paper that got out of the limits. Wait for complete drying and go through the usual buff of sandpaper. Thus, it will be possible to very smoothly and carefully remove excess paper.
The legs can be painted using water -based paint. When everything is completely dry, the furniture is overlapped with two layers of varnish. Remember that they should be applied perpendicular to each other.
This will provide an excellent coupling and will prevent you from smearing paper and spoilage of design. Typically, such an alteration is enough for about 5 years. You can safely put hot on the surface and use wet fabric for washing.

Photo before and after alteration of old furniture

All options presented above are suitable for people who do not have furniture assembly or manufacturing skills. Therefore, they are the simplest for an ordinary layman. If you have certain skills, you can carry out major repairs of furniture. It will be possible to turn the furniture into a new one, leaving the old case.

Glass alteration options:

Indeed, many masters have noticed that the old hull furniture of the Soviet model is very reliable, made of high -quality materials, so it can last more than one decade.
Many even note that the quality of Soviet furniture is better than modern, due to the use of reliable materials. This is true. Therefore, do not rush to spend a lot of money, purchase new furniture.
Perhaps the alteration of old furniture will allow you to update the room and save a decent amount of money. What to do with glasses? The old walls have a lot of glass doors that can be decorated using modern accessories.
If the glass is scratched, it has an untidy appearance, you can thoroughly wash it, degrease it with alcohol, and stick a translucentself -adhesive film. Now on sale there are stained glass options with a variety of colors.
They will help to hide the content of the locker from prying eyes, while giving modernity and novelty of furniture. Be sure to replace old loops and accessories. Now there are a lot of modern options, chrome and matte, which are suitable for rooms in the high-tech or modern style.

Below you can see the photo before and after alteration of the old furniture. Thanks to imagination, the use of modern finishing materials, it will be possible from an old, battered chest of drawers, to create unusual, interesting furniture for children or bedrooms.

Alteration of the old furniture in a new one with your own hands: step -by -step instructions

Oddly enough, but it is not necessary to make an updated version of the previous product from the old furniture. You can completely redo the furniture and turn it into something else. For example, a fireplace can be made from an old dressing room.

Alteration of old furniture with your own hands, step -by -step instructions:

To do this, it is necessary to use polyurethane molding, as well as a decorative stone, or a self -adhesive voluminous tile for natural stone, or marble. To do this, you need to leave only the housing, while remove the doors in such a way as to get a box without a wall in front.
Further, it is necessary with the help of the remaining boards where the door was, leave only the frame, extract glass. This place around the perimeter must be covered with polyurethane monitoring, imitating the frame. From above, structural, volumetric monks are used, which will serve as a cornice.
The center is also filled with artificial stone or self -adhesive. In this case, it is necessary to place yellow backlight or infrared heater inside. It is best not to use heating devices, but to use decor.
The surface is pasted with self -adhesive, or a decorative stone is attached to liquid nails. Now there are decorative options made of foam imitating this natural material. Below in the photo you can see how it looks. In fact, an interesting, unusual fireplace turned out from the old battered dressing.