Copper sulfate is actively used in gardening, construction, as well as for the treatment of animals and even people.
Content
- Copper sulfur Instructions for use
- Copper sulfate use in grape gardening, roses
- The use of copper sulfate in the garden: for tomatoes, cucumbers, strawberries
- Copper sulfate use in construction against fungus and mold
- Copper sulfate use in the pool
- Copper sulfate use in veterinary medicine
- Burn with copper sulfate - treatment
- Treatment of cervical erosion with copper sulfate
- Treatment of the fungus of the feet and nails with copper sulfate
- Treatment of psoriasis with copper sulfate
- The use of copper sulfate as a fertilizer
- Video: Processing of trees and shrubs of copper sulfate
Copper sulfate is a wide spectrum fungicide. It fights perfectly with plant diseases in the garden and ogorodist farming. It is also used in construction and to treat fungal diseases of the nails.
Copper sulfur Instructions for use
This substance is actively used by gardeners and gardeners for spraying trees, shrubs and various plants. The solution is prepared immediately before use, it cannot be stored, since it loses all its beneficial properties.
Copper sulfate Instructions for use:
- Preparation of the solution: Dissolve 50 grams of powder substance in a small amount of water. Stir thoroughly until the crystals completely dissolve in water. After that, add water to get at least 5 liters
- Treatmentit is carried out in dry weather, there should be no wind. It will be good if, after spraying, there will be dry weather (without rain) for at least 4 hours. Carry out before the release of floral ovaries
- Protection It occurs within 2 weeks after spraying, and the effect of the drug begins after 2 hours after it enters the surface of leaves, branches or roots
- Forbidden Mix copper sulfate with other plant processing products
- Security measures They are banned when preparing a solution in food dishes. When working with this substance, you need to wear a respirator and protective eyes for the eyes. Work with copper sulfate is not carried out in the presence of children and animals. After spraying, a person must thoroughly wash the skin, rinse his mouth and put on clean clothes
Important: it is not recommended to spray if the air temperature rises above 30 degrees. Spraying is not carried out if the flowers on the trees have already blossomed.
Tip: Work with copper sulfate away from the sources of drinking water. This drug has a 3rd hazard class for humans.
Copper sulfate use in grape gardening, roses
- Copper sulfate does not form toxic chemical compounds. Therefore, it is actively used in gardening and gardening for the processing of leaves, stems and roots from harmful insects and bacteria
- Residual manifestations copper sulfate in fruits and soil do not pose dangerous to human health
- Copper sulfate when using grapes in the gardening, roses, divorced with water in different proportions. It all depends on what needs to be sprayed and when
- Root disinfection It is carried out after the removal of bacterial growths. Dilute 50 grams of powder in 5 liters of water, mix well until the drug is completely dissolved. Hold the roots in the solution for 3 minutes, and then rinse them in water
- For processing roses and grapes leavesDilute 2-5 grams of copper sulfate into 10 liters of water
- If you need to process grapes or ovaries of rosesthen dilute 100 grams of the drug in 10 liters of water
- When planting plants in the ground, treat the Earth with a solution in a proportion of 2-5 grams per 10 liters of water
The use of copper sulfate in the garden: for tomatoes, cucumbers, strawberries
- Leaves, stems, rootand vegetables and berries throughout the garden season, can affect different diseases
- Spring It is necessary to process the soil before planting seedlings
- After planting seedlings, for example, tomatoes, late blight can be seen on the beds. At the first signs of the disease (brown spots on the leaves and stems), pour the soil with a solution of copper sulfate - 50 grams per 10 liters of water. Pour no more than 4 liters of solution under the root of one plant
Important: the same solution can process seedlings of cucumbers and strawberries. The use of copper sulfate in the garden: for tomatoes, cucumbers, strawberries, helps to save the plant from the disease and get a rich harvest.
Copper sulfate use in construction against fungus and mold
- Mold - This is an uninvited guest who appears in the apartment quietly and imperceptibly
- A small spot grows quickly, occupying more and more area
- Fight With this fungus, it is necessary immediately after the appearance of a small spot, since spores of mold negatively affect human health - a cough, runny nose, headaches and tearfulness appear
- Copper sulfate when applying in construction Against the fungus and mold, used in the form of a solution: 100, 200, 300 or 500 grams of the drug dilute in 10 liters of water. Mix the solution well and apply the surface affected by the fungus with a brush for whitewashing. The dosage of the drug depends on the depth of wall damage
- After work, ventilate the room. Work in gloves, robe and respirator. Put on special glasses to protect your eyes from the solution of the solution on their mucous membrane
Important: so that mold does not appear on the surface of the walls as long as possible, take preventive measures. If humidity increases in the apartment after taking a bath or after cooking food in the kitchen, then ventilate each room more often.
Copper sulfate use in the pool
The owners of pools and garden reservoirs are faced with the question: how to deal with water flowering and how to improve its transparency? The most affordable and effective tool is copper sulfate. It fights perfectly with branched, planktonic and fibrous algae.
Copper sulfate use in the pool:
- If in yours there are stones, pull them out and clean them with a stiff brush. Rinse the stones in a solution of copper sulfate (50 grams per 5 liters of water)
- If a water in the reservoir muddy, you can clean it: sew a fabric bag and pour a little powder of copper sulfate into it. Put a bag on the bottom of the pool - this will help prevent the formation of unicellular algae
- For water disinfection, 0.9 grams of copper sulfate per 1000 liters of water are used
Important: copper sulfate does not help in the fight against various infections and viruses. To eliminate these problems, special chemicals must be used in the pool.
Copper sulfate use in veterinary medicine
There should be many drugs in the livestock first aid kit of the livestock so that you can help cattle or other animals in eliminating health problems. Copper sulfate is used as an antiseptic for washing wounds.
Copper sulfate use in veterinary medicine:
- For washing the wounds, for cauterization of the umbilical cord In newborns, a 3%solution of copper sulfate is used
- Copper sulfate is excellent antiparasitic agent For sheep-a 1%aqueous solution is given to drink once a day. Small lambs under the age of 3 months give 30 ml of a solution of copper sulfate per day, at the age of older than 3 months-35 ml
Burn with copper sulfate - treatment
As mentioned above, when working with copper sulfate, it is necessary to observe precautions: put on glasses, a respirator, gloves and a robe.
If, nevertheless, the burn with copper sulfate occurred, then the treatment should be urgent:
- When the drug gets on the skinUrgently rinse its surface with running water. A few days later, the skin will regenerate
- If it happened inhaling the drug, then you should drink a large amount of water, take any diuretic drug. If in the evening there is an increase in body temperature, take an antipyretic drug and consult a doctor
Remember: copper sulfate dissolves well in fat, so it is not worth it when intoxicating with this substance, use dairy products and oil. This will aggravate poisoning.
Treatment of cervical erosion with copper sulfate
- Many women successfully treats cervical erosion using copper sulfate
- Dissolve one tablespoon of crystals in 1 liter hot boiled water. For douching, 1 tablespoon of the resulting concentrated solution is dissolved in 0.5 liters of water with a temperature of 35-40 degrees. During the procedure, you need to thoroughly irrigate the walls of the vagina and the cervix
- Procedure produce for 10 days at night. After that, go to the gynecologist for verification
Remember: the treatment of cervical erosion of the uterus with copper sulfate is carried out in the middle of the menstrual cycle. It is forbidden to carry out the procedure during menstruation!
Important: our health is the most valuable that a person has! Therefore, if you doubt the effectiveness of this method, then it is better to seek help from a qualified doctor who will diagnose and prescribe treatment.
Treatment of the fungus of the feet and nails with copper sulfate
Nail fungus is an unpleasant disease that affects the skin and nail plate. Many people ask how to treat this disease at home?
Since ancient times, people treat the fungus of the feet and nails with copper sulfate:
- Prepare the solution: Dissolve 1 teaspoon of the drug in 1 liter of boiled water. With it, you can make effective baths for treatment
- Preparation of the bath: Heat 10 liters of water to 40 degrees, add 100 grams of the prepared solution and mix. Submerge your legs for half an hour
- Thereafter remove your legs out of the water and wipe with a dry towel. After the bath, you can rub the ointments and creams that the doctor prescribed
- Carry out the procedure within 14 days - the result will be seen after the first week of applying the bath
Treatment of psoriasis with copper sulfate
It is known that even in ancient India, people got rid of skin diseases with copper sulfate. It helps to quickly improve the skin, saving a person from hated diseases.
Currently, many people are treating psoriasis with copper sulfate. It activates the body's defenses and has an excellent bactericidal effect.
Baths with copper sulfate with psoriasis:
- Dissolve 3 tablespoons of the drug in 200 liters of water
- The water temperature should be no more than 45 degrees
- Plush into the bath for 15 minutes
- After the bath, do not wipe the body, but just put on a soft bathrobe
- To conduct a full course of such therapy, you will need 15 procedures
Ointment with copper sulfate with psoriasis:
- Grind celandine grass (25 grams) and copper sulfate (50 grams) in dust
- Add 50 grams of yellow sulfur to these ingredients, 25 grams of birch tar and 150 grams of guts of pork fat
- Mix all the ingredients and put the mixture in a water bath
- After 15 minutes, remove the ointment from the heat and cool. Apply to the affected areas of the skin, every day for a month
Important: before using the ointment, conduct a test to an allergic reaction: apply it to the outside of the elbow. If for 12 hours the skin did not turn red, then the next day this ointment can be used for treatment.
The use of copper sulfate as a fertilizer
Gardeners use copper sulfate as microns of soil on the land. This helps to make up for a lack of copper in the soil.
The use of copper sulfate as a fertilizer:
- Make this fertilizer in early spring or late autumn
- Fertilize the Earth no more than once every 5 years
- Grind the drug before use so that the nutrition is effective
- Take 1 gram of the drug based on a square meter
- Dissolve crystals in water and pour the garden
Copper sulfate is an excellent tool for use in different areas of human life. It helps effectively fight pests and fungi. This was already understood by gardeners and other people who buy the drug in pharmacies for their needs.
Video: Processing of trees and shrubs of copper sulfate