How to light up sneakers and sneakers correctly? Types and methods of lacing sneakers with 4, 5, 6, 7 holes. How to tie bows in sneakers and sneakers beautifully?

It turns out that there is far from one way of lacing and tying laces. Many tips will help you choose your individual style and make shoes beautiful.

How to properly and beautifully lace sneakers and sneakers? Photo with descriptions

• Currently, there are many ways to cover sneakers or sneakers. Modern lacing makes sense not just a way to keep shoes on the leg, but a way to express yourself or attract attention
• It is acceptable for many subcultures to wear bright laces and tie them completely non -standard. If you study the laces in detail, you can be very surprised how original the types of bantal tie, extinguishing into holes, twisting together
• The most popular of them is "Zigzag". This is the usual way of tying laces on any shoes. It represents the crossing of the rope along the entire length. Such lacing does not attract attention and is absolutely standard

Everyone, even a child, will be able to lace a zigzag. For this you need:

1. Find the lowest rings of the holes and pass the cord in them so that the two ends come out from the inside out
2. Until the next holes, you need to cross the ends of the lace and also pass them from the inside out, you need to do such a movement for each pair of holes
3. At the end of the location of the holes, the two ends of the lace are tied into the simplest bow of two loops

This traditional lacing is good in that the sneaker is located outside and thereby does not rub the leg. However, it has a disadvantage - too dense knitting crushes the boots.

• Another, no less popular, lacing - "European". It looks good, the main thing is original and not boring and nevertheless does not cause any negative emotions
• As the name implies, this method of tying laces appeared in Europe and is still very popular in it
• The originality of the cord is added by the tying method: one lace should pass through both holes at the same level

It is not at all difficult to make European lacing:

1. The lace must be drawn outside into the lower ring holes
2. One side of the lace (marked with yellow in the picture) should exit through the upper openings of the lacing
3. The other side (marked with blue in the picture) should go one hole above
4. Alternating lacing continues until the end of the holes

This type of lacing is fast enough and the laces tied “in European” shines look neat and stylish. And this despite the fact that at the beginning the lacing looks a little confusing.

If you definitely want to attract the attention of others to your shoes, you need to try direct lacing. This is an absolutely even, parallel location of the laces in the holes. Diagonal lacing is absent and therefore the shoes look neat.

Be careful, such lacing should be on shoes with an even number of holes. If you have odd - leave the upper holes without a lace, as is done in the picture.

Try even lacing on your shoes:

1. One end of the lace (indicated by blue) should be slightly shorter than the other end
2. One end remains unfinished, and the second reaches the very top
3. The lace in this knitting must necessarily go into the holes from the outside inside
4. It is not customary to tie the bows in such lacing, hide the laces inward

Sometimes it is difficult to neatly tie a “straight” lacing the first time, but you should practice several times and you can achieve a beautiful result. The advantage of this lacing is that it can always be loosened for free wearing.

Original lacing of sneakers and sneakers

The original lacing will be a real decoration for your shoes, it will attract the attention of others. Sometimes an unusual way of tying laces will be able to emphasize the beauty of your sneakers or sneakers.

If you have never tried anything more original than a “zigzag” or “direct lacing”, you can begin to practice such an unusual way as ” Sawn -uted lacing«.

1. In the lower rings, the lace is necessarily introduced from the outside inside
2. One lace (yellow in the picture) should pass horizontally in all rings
3. Another (blue in the picture) is spreading obliquely with the obligatory passage of one hole
4. It is worth continuing this lacing until one end of the lace is over

This lacing is easy to tighten and it looks very impressive. The lace, located diagonally, can be directed both to the right and left, but it can be opposite to each other.

If the “sawn -uted lacing” is not impressive, try it on yourself "Commercial lacing."This is a rare and unusual way of tying laces. It also has the name "diagonal lacing."

1. Pass the lace into the lower holes outside
2. One end of the lace should be significantly shorter than the second
3. Pass the short end in the last hole from the opposite side
4. The second end, take the lace into all holes to the very top, tie

Such lacing is quite practical, because it is quickly tied, untied and cut. There is only one lack of it - a different length of the laces above the sneakers.

Lacing of women's sneakers and sneakers, a way of tying laces

Of course, the lacing should be universal, male and female, in order to highlight and emphasize the grace of even sports shoes itself. Every woman should try such a way of tying laces at least once. The most popular and simple is the lacing "Butterfly".

It is called "butterfly" because it is compared with a male decoration-butterfly. This method most effectively lengthens the laces. The secret of this lacing is very simple: the laces are crossed on the front part and stretch inside.

1. First of all, you need to go through the laces outside and stretch them
2. The lace inside should be stretched up, passing one “floor” of holes
3. After that, the laces are threaded and crossed outside
4. The action is repeated from top to bottom, wearing such lacing is very comfortable

You can wear a “butterfly” lacing in order to loosen the pressure on the leg. The lacing gives the legs enough space and freedom.

Lacing of men's sneakers and sneakers, a way of tying laces

• Male lacing should be distinguished by originality, style and be reflected in masculinity. Modern lacing is a way of self -expression, therefore, your mood and character can be conveyed even in such trifles as a way of tying laces
• One of the most popular cords in men is Lightning lacing. Its name suggests that the lacing is similar to the fastener. It is quite complicated, but strong and reliable

1. It is necessary to stretch the lace through the lower holes and remove from both sides on the sides
2. Both ends of the laces are touched to the screeds at the same level and are supplied to the subsequent pair of holes that are inside
3. The tips of the laces need to be crossed, pass under the ties of the resulting level and raise
4. Such movements are repeated to the very top

The lacing looks very beautiful, it will add any male shoes of style and beauty. Such lacing can look spectacular on moccasins, sneakers, sneakers and sports shoes.

Clay lacing with 4 holes, lacing method

• The lacing for four holes of course limits the possibilities for creating intricate patterns or weaving. But in such cases, you can achieve a beautiful and elegant design of the ties of laces. Four holes are considered to be on one side
• The most popular option is to tie the laces with a cross out. This style does not cause negative emotions and looks quite decent. To do this, you need to go through the lace into the lower rings outside, remove from the inside, cross and put again in the rings
• More impressive on shoes with 4 holes for laces look even strips of lace. They visually lengthen the sneakers. It is not difficult to lace such a style, but it looks neat and fashionable

Clay lacing with 5 holes, shoes lacing methods

A larger number of holes for the lace gives more opportunities to create a beautiful style for your shoes. Five holes are the most common number of holes on the sneakers. Have you ever tried to lace the sneakers with one lace? Be sure that this method will cause many questions from others and attract views.

But do not dwell on simple options, because almost everyone is able to think of such. Interesting and popular is the lacing "Knot". Everyone is able to perform it and it is perfect for shoes with five holes:

1. Insert the lace into the lower holes from the inside and pull it out, align the lace along the length
2. Cross the lace, wrapping one end against the other and direct them again in opposite directions
3. Insert the lace every time from the inside and make the knot outside

Unusual lacing of sneakers with 6 holes

Shoe laces with six holes is a real site for creativity. You are free to create the most unusual patterns and interweaving with the help of only laces. Choose flat laces of medium thickness and then you can definitely achieve a spectacular pattern on shoes.

There is one way of lacing called "Shop lacing". It is very similar to nodal, but nevertheless it is not simple and is distinguished by an intricate viscous. Such lacing is suitable for both flat moccasins and volumetric shoes, because the secret lies in how elegantly you will intertwine the two ends of the laces.

1. The lace is threaded from the inside and displayed out
2. Both ends are eaten into the upper rings from their sides, stand out from the inside and return out
3. Each end clings to a loop to a neighboring lace and reaches up again
4. A similar pattern is repeated to the very top

The pattern is quite complex and it is able to tighten the shoes, but its advantage is that it is also able to shorten long laces. The pattern looks neat and stylish.

What is the lacing of sneakers with 7 holes?

For those who want to transform shoes with seven holes, there is a great way called "For riders". They then came up with, so that the long laces did not interfere, do not get confused and tightly tie the shoes, kept her on the leg tightly.

1. Skip the lace diagonally and remove it from the upper right and left lower hole
2. The upper lace (marked with blue) should be zigzag to go down to the central part of the sneakers
3. The lower lace (marked with yellow) should be zigzag to rise to the central part of the sneakers

The lacing looks quite modest and neatly, but unusual, and it will not be easy to shoot shoes.

How to tie bows in sneakers and sneakers beautifully?

Perhaps you have never thought that there are methods of non -standard ties of laces in bows. Everyone is accustomed to either make a standard node of loops, or hide the ends of the laces. But how often did you observe a bow tied to the side? This is a new solution that allows you to make shoes sweet and pretty.

1. To tie such a pattern of much, it is not necessary to repeat the same type of weaving on two sides
2. The ends of the laces move as if in the "Greek pattern", passing through the holes inside
3. Some variation of the passage of laces on the holes can be changed, for example, making them even or crosses
4. The bow is tied on the side, the remaining long ends of the laces are removed and hidden

Running lacing for running, what is it?

Sports shoes need a special lacing that will tightly hold the sneakers on the leg and give the unit to unbel up.

• Initially, it is necessary to remove the ends of each lace through the upper and lower holes of the left row of holes
• Next, you should cross and enter it into the upper and lower openings of the right row of holes
• The end of one lace must be raised up through one hole, and the second lace must be removed out and pulled to the left

Video: "5 best ways to knit shoes"