How to tie the scarf with knitting needles quickly and simple: scheme and description. How to knit a scarf with knitting needles for beginners? How to knit down, openwork, Scandinavian, bactus a scarf, with a border knitting needles: diagrams, description, photo

Ideas and patterns for knitting a scarf.

Knitted scarves were popular with our grandmothers. They made them themselves, and then put them for storage in wooden chests and handed over the products to their daughters, granddaughters ... Such gifts were considered the most valuable, therefore, the women who owned them kept the scarves for a long period of time.

Making a beautiful and original scarf - the work is not easy, especially for beginners. But this process can be easily learned if you use the correct instructions and the scheme that we propose in this article.

How to knit a scarf with knitting needles for beginners, where to start?

Before starting the entire process, decide on the product pattern. After all, the knitting itself depends on him. There are a large number of methods for making knitted scarves. We offer you to consider the easiest.

This product has a continuous center. Patterns are located only at the edges. This knitting method is considered the simplest, especially for those who do this for the first time.

• Start knitting a scarf from the center. Type of the right number of loops, plus 2 additional loops, that is, only hem. Take the loops with one thread on 2 knitting needles. Take the number of loops, given the size of the product. For example, if you want to tie a 120 mm handkerchief for 120 mm, then dial 200 loops, you can a little more. It all depends on the thickness of the yarn.
• In the next rows, remove the brown loops at the beginning of the rows, do not knit them. Enter the spoke on the right side, direct to the left. Keep the working loop on the index finger. Hitch the crum loop the wrong side.
• To obtain a square shape, increase the number of rows. Their number should be larger than the number of loops in the row.

• Then knit the border. Stitch it by using the front loops as the central part of the product. Dial 5 loops, add 2 hem. Then knit a row with the wrong loops. In the subsequent rows, remove the bromic loops, do not knit them. Enter the spoke on the right side, directing to the left. Keep the working thread on the index finger.
• Having tied the border and the center of the scarf, connect them. To do this, use an additional thread. On the knitting needle located on the left, on the one side of the central part, type the brown loops. To the spoke located on the right, pick up the bromic loops using the border.
• Throw the loop of the knitting needle on the right on the knitting needle of the left. Knit the loops together. Throw 2 loops on the knitting needle on the left side, knit 3 loops together. Continue to knit until the border ends. Stitch another border in parallel to the border that you have already knitted. 2 Together with the corners on your knitting needles, knit the whole.

How to knit an Orenburg down scarf: diagram, description, photo

The Orenburg scarf is 3 varieties:

• Simple model. It is made of thick, gray or white down yarn. Such a scarf previously wore such a scarf every day.
• Spider Web. It is made of thin down or silk yarn. The scarf pattern is quite complicated. But the product eventually turns out to be tender and thin, it passes even through the ring.
• Palance scarf. Big down scarf. He was worn only on holidays.

Experienced knitters to tie such a scarf is not difficult. If you can type loops, knit the front loops and the wrong ones, the wrong ones, then you can also easily make a beautiful scarf.

• To begin with, purchase 250 g of thin, down threads. As a rule, they are already sold tense on cotton threads.
• Carefully study the description of the work according to the scheme. The Orenburg scarf is performed with a border, which is located on all 4 sides. Be extremely careful, try to strictly observe the work order.
• First tie the bottom of the lower corner located on the left. The angle of the product has the right and left. Stitch 2 sides at the same time, as shown in the figure. Between the parties, knit a dividing “path” using 2 front loops.

• When knitting the border completely, transfer to the pin: one part of the border, the left loop, located at the top and the loop of the “path”. Knit the border until you get the necessary length. Stitch the lower corner located on the right side, put on the pin the right side of the border, located at the top and loop of the “path”.
• Turn the loops from one pin to the knitting needles. Inside the border, type the desired number of loops to knit the main canvas. Knit it together with the border of the product on the side sides until you get the right size.
• Take the upper corner of the received border, remove the loops from it. Do the same with the canvas of the product. Put them on a pin. Stitch the next corner of the product, like the second angle. Alternate the crochet, while knit the necessary loops together.

How to knit an openwork scarf: diagram, description, photo

Openwork shawls are winter, summer and so on. It all depends on what you want to use yarn. For the winter version, threads made of goat fluff are suitable. But they are considered quite rare, since they are expensive.

If you are just starting to knit, then it is advisable for you to choose cotton threads. With the help of them, you can easily tie a scarf pattern and get a beautiful product.

The openwork scarf that we want to offer you has a length of 90 cm, the width of the top 180 cm. For the manufacture of the product, you need to buy blue threads (mohair, acrylic), knitting needles No. 5, hook No. 3.5.

Climinate the openwork scarf according to the scheme. This scheme shows only rows knitted with facial loops. Cut the wrong ones according to the resulting pattern of the scarf. The density of the scarf is this: the report is 11 cm.

• Start knitting from the lower corner, continue to the top. Tie 3 loops, knit the first strip with the wrong loops. Follow the pattern, starting with 2 strips of drawing.
• As soon as you knit 14 rows, knit 7 facial loops on both sides. Knit from 1 to 82 row according to the scheme. Then continue to knit with additions.
• Add 21 links from the right side along the edge. Repeat the ornament report 3 times, add 22 loops on the left.
• Cross the openwork braids in every 6 row. After tie the braid 90 cm, close the loops. Tie the finished scarf with one strip, using columns without crochet.

Square scarf web: diagram, description, photo

Casters who can knit shawls create unique products. A thin wading scarf is a wonderful accessory, an excellent gift, and sometimes a remedy that helps to cure many joint diseases.

To make such a scarf, take the main assistants:

• Yarn
• Knitting needles

The spider web is quite difficult. Even professional knitters can spend about 2 weeks on a scarf. For knitting, you will have to stock up on goat fluff and knitting needles No. 2.5 with limiters so that the loops do not slip during operation.

To make the openwork scarf you get air, choose thin threads. Almost all wool scarves are performed using a pantry knit. If you do not want to know the mating density, first knit a sample. Perform the product loosened using thick knitting needles.

• Choose a suitable pattern for the product, for example, “peas” or “chervonka”.
• Start knitting the edge: dial 21 loops. The first row: knit 5 facial loops, 2 wrong, 13 front. Perform a broach, increase the row, adding 1 loop.
• Knit as shown in the pattern of the pattern. Use a broach in the second rows. You will get an inclined edge. According to the scheme, knit a spider web so that it is 1 \\ 2 part of the product.
• Next, knit in another direction, only in the mirror. In the even rows, reduce the loops. You do not need to add.

The connected product after completely tie, wash, preferably with shampoo, do not unscrew.

How to tie a scarf with knitting needles Scandinavian: diagram, description, photo

The scarf has the following dimensions: 130 cm*65 cm. For its manufacture, take:

• Yarn - 200 g
• Circular knitting needles at number 5.5

Execution process:

• Dial 7 p (loops).
• 1 p - kr, 2 hp, n, l, n, 2 hp, kr.
• 2 p - kr, 2 hp, 3.p, 2 hp, kr.

Then, in odd P, add P for the first 2 p. To the central P and after it, as well as before the last p. In those rows that are considered even, 2 p the first plus 2 p the last before the KR, knit L.P. So knit 30 p.

• 31 p - Pearl pattern: kr, 2 hp, n, alternate L.P with I.P. until the river ends. Finish it 2 hp and I.P.
• 32 r Plus the following 9 r - Pearl pattern.
• 41 p - kr, 2 hp, n, l.p, * n, 2 p, made with an inclination to the left side * (repeat from one * to the other * to the center), n, the central part of the scarf, n, * 2 P, knit together with the slope to the right, H*. Repeat from one * to the other * until the river ends. At the end of L.P., N, 2 hp, kr.
• 42 r - n knit the wrong side.
• 43 r by 46 r - pearl ornament.
• 47 r by 66 p - a scarf ornament.
• 67 r for 78 r - pearl ornament.
• 79 p - kr, 2 hp, n, l.p, * n, 2 p, knitted with an inclination to the left side * (repeat from one * to the other * to the central part), n, the center of the scarf, n, * 2 P, together with the slope to the right side, N * repeat from one * to the other * to the end p), lp, n, 2 hp, kr.
• 80 p - the wrong p.
• 81 r by 86 r - pearl ornament.
• 87 r by 106 r - a scarf ornament.
• 107 r for 124 r - a hillock ornament.

Close the knitting. Hide the tips of the threads.

How to tie the bactus scarf: diagram, description, photo

Bactus is a scarf with a triangular shape. Often, such a product is performed using knitting needles, after which it is tied with hook. Many models do not have a strapping at all. We offer you to make a simple and very stylish scarf, the manufacture of which can even be newcomers.

For work, take:

• Woolen or acrylic threads - 300 g
• Knitting needles at number 4 (any)
• Hook under number 4.5 (they are not required)

The size of the product is 180 cm by 50 cm. The main pattern is a scarf.

Knitting process:

• Dial 6 p, knit 3 hp, 1 I.P, 3 l.p. Then knit as shown in the diagram. Start with 1 p.
• Knit from 1 r to 6 p, as indicated in the diagram. Continue to perform the work similarly to the scheme: from two sides in the front r, increase the number of P to 6, that is, make n and increase.
• You can knit the product to the required length, and then close the p.

Brushes:

Cut about 80 pcs. segments of the thread, 30 cm long. Make 3 brushes. Sew a canvas to the corners.

How to tie a scarf with a border knitting needles: diagrams, description, photo

The interesting appearance of this scarf is that first of all its border is knitted with a hook. And after that, work is performed with a platoon ornament.

Product size: 179 cm by 51.5 cm.

Necessary devices:

• Threads - 30 g.
• Hook at number 5.
• Circular knitting needles at number 5.5

Border:

• Stitch as shown in the diagram using a hook. When this, turn P with lifts: 2 vp or 3 V.P.
• From 1 r to 8 r, knit 11 times. From 4 r to 7 r, knit the arch.
• To get the corner, knit once from 1 r to 5 p. Then knit 9 p and 10 p times. Start with 3 p, continue to knit a beautiful border to make a right angle.
• At the same time, knit from 3 p to 8 p. Stitch 10 times from 1 r to 8 r as in the diagram. Finish according to the scheme from 1 r to 7 p.

Shortened ranks:

• Start knit on 7 marked P located in the middle. Knit n, then turn the knitting, remove the first P from 1 N, like I.P.
• Tighten the thread tightly back, knit the marked P, turn the viscous, remove 1 P from 1 N as I.P, knit in the opposite direction. N of the past r, knit with the subsequent n together L.P.
• Start knit 3 p, add 2 ps on each p to both sides. Only then turn the work, removing 1 p with 1 n as I.P. Subsequently, the P, knit n together with the next p.
• Thus, the number of P in 2 P will increase by 4 pieces.

The process of mating:

• After you tied the border, you will have 1 p - this is the first kr.n canvas.
• Pick up on the circular knitting needles on the inside of the sides of the border in this way: *1 n, skim, from the air p. Sie 1 p. Repeat 1 p. Repeat from one *to the other *. Finish 1 n. Type 1 kr \u003d 187 p. Note that H is also p.
• On the wrong side, knit 1 kr, *from N, knit 3 p (it turns out 1 hp, 1.p, 1 hp), I.P. Repeat from one * to the other * 91 times. Finish knitting H, 3 P, 1 kr \u003d as a result, it turns out 373 p.
• Stitch all the loops with a patch ornament. In 2 p, distribute evenly, remove 78 p so that you get 295p.
• Mark the central 7 p, continue to knit with a shortened river. Having knit 42 cm, close the n like l.p.

How to tie the teeth on a down scarf with knitting needles: pattern pattern, description

• On the desired edge in the face of the scarf, put on the knitting needles of the P, use the “facial surface” pattern. Decorate from 3 to 5 r in both directions, given the width of the edging.
• After that, do the work in this way: 1 N, 2 hp together. In order to knit a border in the opposite direction, make a viscous similarly, only using I.P.

• Continue the next work L.P, but initially decide on the number of p.
• In those places where N is present, fold the edging in half. So you get the edges in the form of teeth.

How to tie a beautiful, openwork border to a scarf: pattern pattern, description

If you are interested in how to knit a beautiful border for your scarf, use the next pattern.

Also a good option for a border is next

Knitted scarf on the head with knitting needles

If you decide to tie a downy scarf, but, unfortunately, you did not find threads, then you can make it from mohair threads. Believe me, the resulting product will also look beautiful and gently. Plus, it will warm you in cold weather in winter.

Scarf size: 111 cm by 234 cm.

Necessary devices:

• Yarn - 125 g
• Circular knitting needles at number 5

Tie the main pattern as indicated in the diagram. It shows only the front river. From the wrong side, knit P, taking into account the pattern. Nakida knit I.P. Stitch once from 1 to 72 r, then repeat the work from 57 r to 72 p. Make an expansion of the pattern on both sides after the scheme is over.

Knitting process:

• Dial 3 p, knit the main pattern. Make additions to make your bevels on your sides.
• When you bind a canvas with a size of 107.5 cm, knit 4 cm with a patch pattern. Continue knit on both sides, make extensions, as you did in 313 p.
• When knit 111 cm of the canvas, close the p.

Knitted scarf on the head with knitting needles from Angora

For the manufacture of this scarf, purchase Angora threads, knitting needles No. 4.5, No. 5, No. 6. Knit the pattern as indicated in the diagram.

Execution process:

• Type 1 P on knitting needles, then continue to knit according to the scheme, while making the addition of p. When you will form a new ornament at the beginning of the strip, dial another 3 p.
• Then knit a pattern from them, as indicated in the diagram. For example, as in 10 and 11 stripes.
• When you tie 11 reports in width, close the p. The height of the product should turn out to be 70 cm.

Assembly:

• Typ on knitting needles at number 4.5 along the edges of about 150 p. Stitch 1 p, using an elastic band 1*1. Subsequently, from even P, knit 2 p.
• The total number should turn out 225 p. Then knit 2 p the front surface, go to the knitting needles at number 5. Hitch 1 p the front stitch, continue the drawing, as in the scheme from 21 p to 30 p. Change the knitting needles with this report. Take at number 6.

Ending - close the P according to the figure.

How to tie a scarf with a triangular knitting scarf, a scarf?

The next model of the scarf must be knitted simultaneously with several patterns. The size of the scarf: 85*185 cm. For the manufacture of the product, purchase merino or silk threads. You will also have to take the knitting needles 3.5.

• Stitch it, starting from 1 to 48 stripes. According to the scheme, you must knit from 3 p in front of 1 arrow, then repeat the rapport that is located between the arrows. Finish the work.
• Knit the product from the center of the elongated side. Dial 5 p, knit the pattern to 48 strips. In subsequent R, continue to knit in the same way. When tie 167 r, get 338 p.

• Continue to knit, as indicated in the diagram under the letter B, on it shows the right part of the pattern from 1 and to the last paragraph. The left side knit symmetrically.
• Go to work, as the scheme shows. When you reach 10 p of this ornament, close the p.

How to knit a shawl scarf?

This scarf is considered an ideal model for beginners. The scarf is knitted using the front surface, starting from the elongated angle. The product looks spectacular, and due to the unusual selection of threads, it is generally stylish and fashionable.

An additional decor of the product here is considered brushes located at the bottom of the scarf. They are made of melange threads. This product turns out to be large, you can even drape it with an unusual method.

Work process:

• Type 3 P on knitting needles to form the corner of the product. Continue knitting, expanding the scarf: in each 2 p and 4 r, add 1 p. Stitch the accessory using the front surface.
• Alternate every 60 r thread: first burgundy, then melange. As soon as you knit 360 r, start reducing the P to the opposite direction at the edges of the product.
• Thus, your product will take a triangular shape. Complete the work like this: tie a scarf with burgundy threads with a hook, attach the brushes. You can make them from melange threads.

Video: We knit a scarf together with knitting needles