How to wash the park at home, with fur inside, on synthetic winterizer, on the sheepskin, on fluff, from cotton, hands? How to wash a park with rivets, buttons, in spots, in a washing machine?

Instructions for washing the parks on fur, holofiber, in spots.

The park is modern youth clothing that warms up in winter, as well as in the spring. The main advantage of such clothes is that it can be worn from the end of autumn until the beginning of spring. In this article we will tell you how to wash the park manually and with the help of a washing machine.  

How to wash the park at home, in the car?

Initially, before choosing a wash mode, you need to look at the label and label. Most often, manufacturers indicate the recommendations that should be followed during the washing of the park. If your clothing is decorated with fur, then it is preliminarily removed to remove it, that is, remove it.

Washing rules:

• Most often, manufacturers attach it on buttons, zippers or buttons. After all the parts from the fur are disconnected, it is necessary to fasten the buttons, laces, as well as buttons. Further, the park is turned inside out, and if you have a bag for washing, then it is invested in it.
• After that, outerwear is immersed in the car, a manual washing mode is set without spin, at a temperature of 30 degrees. After the washing is performed, it is necessary to repeat the manipulation, but at the same time it is necessary to pour a glass of liquid washing agent, which is designed to wash down products, and put 5 tennis balls inside. After that, the washing mode is launched.
• As soon as the park is washed, you need to pay attention to the color of flowing water. If it is dirty, the cycle must be repeated. As soon as you see that the water after washing and rinsing is clean, and does not contain impurities of dirt, you can use the spin. Now there is no need to wash, an outgoing mode is set at a speed of about 400-600 revolutions per minute. Tennis balls remain in the washing machine.
• They are necessary in order to ensure the preservation of the splendor of the park. If you do not use tennis balls, then you run the risk of getting a flat object, with pieces of fluff, which will be collected in separate corners of outerwear.  

How to wash a park with fur inside?

In this way, park washing is made, which is made of cotton, as well as raincoats. It may contain a synthetic winterizer, fluff, or holofiber. These are popular fillers and insulation, which most often fill outerwear. But what to do with the park, inside which there is fur and its inability to unfasten it?

Washing rules:

• In this case, the task is complicated. The fact is that very often, a poor -quality fur is used when decorating steams, which may fall apart when in contact with water. That is, at the exit you simply ruin the product, or get a huge number of holes. Chinese manufacturers who make very pretty, worthy and expensive parks are especially sinning like that, but use poor -quality fur to decorate.
• Most often, it is poorly made, so the Mazdra is very thin, and when contacting water, it simply breaks. In this case, you will have to be washed manually or first check the fur for strength. Before that, you can open the park below, where it is not visible, and moisten the Mazer itself with water. After that, leave for 10 minutes and with your fingers try to rub this place.
• If it is quite dense, easily bends, does not break, you can wash the parks directly with the fur. If you saw that it will make up, you will have to wash the park pointwise. That is, for this you need to use a special washing tool.

How to wash the park on the sheepskin?

Washing the parks pointwise:

• It is best to use the washing tool in containers, in bottles that are produced in liquid form. The cap of such a product is diluted in a five -liter bowl of water, a sponge is lowered there, and everything is lost until a lush foam appears. After that, the resulting foam is applied exclusively to the fabric areas and wiped.
• After that, it is necessary to repeat the procedure, but to clean directly from top to bottom. Next, it is necessary to wipe the park using wet fabric in order to remove the remaining foam. After this, the park is laid out on a flat surface, on a towel and dried at room temperature.
• It is necessary to be as careful as possible so as not to damage or wet the fur. If everything is fine with the fur, you can wash the parks manually. A park with natural fur is forbidden to wash in a washing machine, even in delicate mode using special washing products. For washing manually, it is necessary to dilute the cap of a liquid agent in a ten -liter bowl of warm water.
• Its temperature should be no higher than 30 degrees. After immerse the park into a solution with a detergent, with a soft sponge, rub the most polluted places. Try to wash quickly to reduce water contact time with fur. The park can be squeezed out with a washing machine. Download the wet park into the washing machine and turn on the pressing mode by putting several tennis balls there. It is recommended to produce an excavation at minimum speed.  

How to wash the park on fluff, synthetic winterizer, holofiber?

Before washing the parks, it is necessary to pay attention not only to the label, but also to the composition of the fabric. The fact is that sometimes the park consists of combined pieces. If this is a combination of cotton and genuine leather, then it is worth refusing to be washing in the car. After all, everything that contains genuine skin, in no case should not be washed in a typewriter.

After drying, the skin often becomes oak, and loses its shape. Of great importance should be given to the parks with a sewn lining. Or rather, the material from which it is made. Often the lining is made of wool, so it is necessary to navigate when choosing detergents on a more delicate fabric. That is, you will have to choose a liquid agent for washing wool.  

Instructions:

• If there is a heater inside the parks, such as a synthetic winterizer, or fluff, then there is a possibility that the entire insulation can be lost in one part of the jacket. To prevent this from happening, it is recommended to use washing with tennis balls, and drying on horizontal surfaces.
• In no case can you use a hair dryer, iron or hot surfaces, as well as laying out on the battery. Because it can negatively affect not only the quality of the insulation, but also the fabric itself.
• What to do if the filler has lost and accumulated in one part, despite washing with tennis balls? In this case, we recommend hanging the product on the shoulders for several days. After that, take a bamboo stick or a regular knuckle for carpets, and try to beat your park.
• In this way, you will stir up a synthetic winterizer or fluff, and you can evenly distribute it over the entire surface of the jacket. Try to shake or turn it over more often. If this did not help, the jacket has lumps of fluff, you can use the vacuum cleaner.

• The optimum temperature for washing the park is 30-40 degrees. At higher temperatures, you can not wash clothes. Try to make everything maximum correctly. In addition, do not use parks with natural filler for washing, such as fluff, synthetic detergents and powders. They negatively affect the state of fluff and contribute to its knocking down and even destruction.
• The product for washing wool that is sold in liquid form will be an ideal option. You can also purchase special products that are sold in capsules and are designed for washing outerwear.  

How to dry the park: is it possible to dry on the battery?

Dear the park on the hanger and using the vacuum cleaner try to move the lumps from one part to the other. If this option did not help, then the only possible way to put the jacket in order is to break the bags with a synthetic winterizer, down or other insulation, and evenly distribute it over the entire surface of the jacket. The washed product is best dried on the shoulders or in a horizontal position.

Drying the park on the battery is strictly prohibited. This method of drying can ruin it.

How to wash a spots cotton park?

Instructions:

• All spots and strong pollution from the park must be removed before washing in the washing machine or manually. Otherwise, you risk obtaining extensive spots that spread over the entire surface of the jacket. To remove spots, it is recommended to use laundry soap or stain coin.
• If the jacket is painted in some bright color, try using the stain remover on an inconspicuous surface where the lining is sewn. After all, very often such jackets can be diverted.
• In order not to spoil the fabric and not lose the parks, try to experience some detergents from the back. Thus, it is necessary to check the stain coils. If there is no lightening or the appearance of new spots, you can clean.  

How to wash a park with rivets?

Sometimes metal accessories are a real problem. Some buttons, lightning, even with short contact with water, can be rusted. Therefore, it is necessary to adhere to the basic rules if you notice that after contact with water, rusty stains appear. This can be fixed with fast washing, minimal contact with moisture. But the fact is that the park cannot be dried quickly, that is, it is unacceptable to use hair dryer and batteries. What to do so that there are no rusty spots?

Instructions:

• After washing, it is necessary to turn the product on the front side so that all the buttons are facing you.  
• After that, it is necessary to wipe the buttons with a dry cloth so that they are absolutely dry, they are not exposed to moisture. After that, you can resort to other manipulations. Before washing such parks, you can clean rusty places with a turpentine.
• It is sold in a shopping store or in a building materials store. This tool quickly removes rust and makes it less noticeable on metal and fabric surfaces. After such a manipulation, the buttons can be covered with a thin layer of transparent varnish. This will prevent further corrosion. This procedure must be repeated before each wash.  
• Many buyers generally recommend replacing such buttons with new ones if they notice that rust appears in the places of collision of the button and moisture. Very often, such spots appear on clothes, which spoils its appearance.
• So that this is not, be sure to use high -quality things, before washing, check the buttons, metal accessories for moisture resistance. Even buttons that are quite persistent can rust with prolonged moisture. Never soak the park completely. If there are any spots, bring them pointwise so as not to completely wet the entire product.
• This will prevent the appearance of rust on the tissue. In no case do not dry the products from the wrong side. That is, immediately after washing, it is necessary to turn it on to the front side. Otherwise, you will not be able to control whether the buttons with a damp cloth are in contact, and in almost 100% of cases, rust on the jacket will appear.  

The easiest way to wash the parks, inside which is holofiber and a synthetic winterizer. Usually the word “polyester” is indicated on the label. In this case, there should not be difficulties with putting in order such outerwear. It can be easily washed in a washing machine, while the filler does not get down and does not roll. Such products dry evenly even when using drying on coils or batteries. If the fluff is inside, then there is a risk of detecting a filler lump, which will have to be distributed independently.  

Video: How to wash the park?