How to sew a female shirt night with your own hands: a pattern for girls, women full, pregnant, nursing mothers. How to sew a night shirt without a pattern?

Options for simple ways to sew night shirts.

For women, any wardrobe item, in addition to necessity, carries a train of additional reasons for the acquisition of a new model. Night shirt is no exception. Indeed, in addition to warmth, comfort and hygienic necessity, she gives a woman a lot of positive emotions.
Agree, a chic shirt, sewn taking into account all the advantages and disadvantages of the figure, is capable of fashionably transforming a lady of any age.
You can of course buy ready -made charm in the store. But with your own hands, an intimate outfit gives a huge creative range to create an individual model.

How to make a pattern of nightgown with your own hands?

Compilation of a pattern requires certain skills.

Therefore, let's start working with the simplest option.

We prepare:

1. Cut of fabric: length - 2 m, width - 70 cm
2. Beautiful lace
3. Scissors
4. Chalk
5. Ruler
6. Centimeter
7. Watman or millimeter paper

We will build a similar pattern:

• On the prepared paper, we draw the rectangle "Abvg":

1. "AG" - the length of the nightie
2. »Ab»-Merka taken in the thoracic part + 1.5-2 cm

• From point "A":

1. We measure 7 cm to the right - "D"
2. 2 cm to the lower part - "D1"
3. Combine these points among themselves - we get the neck of the back
4. We put off 8 cm down - there will be "D2". The section "DD2" is formed for the front neck

• We proceed to building a sleeve

1. From "b" we measure 10 cm, fix "K", from it 16 cm down - "K1 ″
2. Next, we carry out a perpendicular from K1, to the side of the rectangle "BV". The intersection point is "w"
3. We outline from it “E” and “E1”, putting it up 7 cm to the right, and down. Connect the points with a slightly curved line, get the arm of the sleeve

• We form a hem

1. From "B", we build to the right a segment 7 cm long - "B1 ″
2. Combine »B1 ″ with" E "
3. From "B1 ″, at a distance of 2 cm up, put" and "and"
4. Twist the corner with a smooth line - from "and" to "c"

• Cut the finished template, transfer to the fabric

1. Fold the section in half, the wrong side
2. We attach the pattern to the fabric, fix it with pins
3. Carefully circle with chalk, adding 1.5-2 cm to allowance

• Cut the fabric blank, go to sewing

1. Side and shoulder seams, we get out of the living
2. We bend the hem and edges of the sleeves twice, we live
3. We put an even machine seam on top
4. Around the neck we sew the trim cut along the oblique, in one edge. We attach the box with the front side, to the front side of the product
5. Next, we throw the remaining free side to the wrong side, bend the edge by 0.5-1 cm, sew it with a flat machine with a stitch (you can first make sufficient experience)
6. We remove all auxiliary threads
7. Sew lace

• We iron the finished product

How to sew a female shirt warm and long?

Based on the previous pattern, we build a more complex template. Add a detachment and a swallow. The rest of the principle of action is similar.

• After the pattern is ready, we transfer it to the fabric, cut it out
• We connect the upper and lower part of the gear with a line for the formation of a flows
• We sew the nasal radio as shown in the figure

• Sprinking side seams and sleeves on a typewriter
• Pick up the hem
• We process the neck with a stitch
• Everything is well ironed

How to sew a nightie with your own hands beautiful: pattern

Gorgeous shirt, beautifully emphasizes the chest.

How to sew a female shirt silk with lace?

It is not difficult to sew an elegant shirt of silk if there is a practice of working with silk fabric. Cutting and further processing, due to the sliding structure of the material, create certain difficulties for beginner tailors.

If there is confidence in our experience, we start work.

You can take as a basis the template offered in the figure.

In our example, we will cut with any T -shirt of our size.

• We pin the selected model on a sheet of whatman
• Carefully circle the silhouette
• From the shoulder line, we draw a line, the desired length of the shirt
• To give a trapezoidal style, from the edges of the armhole to the bottom, we draw the line on both sides of the line, expanding the silhouette of the length of the segments should be equal to the length of the finished product
• Combine the final points - we get the hem of the shirt
• We form a detachment coquet under the chest
• Cut it separately from the entire pattern
• For shirts, we deepen the armhole by 2 cm, cut off the excess
• We examine the overall silhouette of the pattern, if everything is satisfied, we cut out
• If necessary, we adjust the cutout
• Cut the fabric, adding 2 cm to allowances
• We cut the coquet from lace fabric
• Save the side seams of the lower part of the parts from the wrong side
• We process the seams with a zigzag, iron each seam using an iron
• We attach the parts of a lace flows, machine seams, to the main part of the product
• We cut out thin straps
• Fold each strap with the front side inside, bend the edge inside, so that you can make a beautiful seam and the fabric does not climb, sweep, put an even line along the edge of the strap
• Iron the details so that the seam is in the middle of the straps
• Now we fix them with a machine line to the back, and the front of the nightie. The seam on the straps should be on the wrong side of the product, that is, subsequently in contact with the body
• Drive the bottom of the product twice, sweep
• We apply a lace tape
• We stitch with a machine
• We remove auxiliary threads
• We iron
• Decorate with a bow of satin tape

How to sew a night shirt without a pattern?

We do not remove the measurements, for the pattern we use any summer sundress of the desired size.

In order to sew the shirt, we take:

1. The fabric segment you like - two lengths of the finished product
2. Bake, cut in an oblique
3. Lace, satin ribbons - at will
4. Tailor scissors
5. Dry soapy piece

• We lay out our sundress on the fabric at an angle of 45% to the hem. The product will turn out a little trapezoidal, it will lie down along the body with beautiful waves
• Circle the outlines of the gear and the back, very carefully
• We cut the resulting parts using scissors, leaving for a supply for seams-1-1.5 cm
• Squeeze the side seams of the fabric patterns from the wrong side, then sew on the typewriter
• The seams from the wrong side are punctured, processed using an overlock
• We take a slanting bike to the neck
• We cut the straps, conceived width and the required length
• We celebrate the points of finding future straps with soap
• We make a machine seam to fixed points
• We insert the straps, sew everything with a continuous seam
• So that the bottom lay down with smooth waves, sew the harvested slanting bike with a zigzag
• Next, we decorate at our discretion, or leave the previous look

How to sew a female shirt: a pattern for girls

Those who have elementary sewing skills will not be difficult to sew such an original shirt for their beloved daughter.

How to sew a female shirt for full ones?

• Measure the chest girth, the length of the shirt
• Add 9 cm to the allowance length
• We multiply the measurement of the chest girth by two
• We cut out of the material a rectangular shape, given size

• We fold it in half, and carry out a diagonal line to give the product a flared silhouette

• Cut the main pattern
• Cut several rectangular parts. In the future we will make jewelry nightshell
• We use any T -shirt of the corresponding size to form a armhole

• Sew the front, and the rear parts, on the side
• We work out alternately:

1. Podol
2. The top of the product
3. Armhole

• Sew a narrow gum along the edge of the shelf

• From the prepared pieces of fabric, we sew two rectangular parts. To do this, we bend them in half, we hang out
• On one edge of each resulting strap we sew in pre -sewn ruffles

• We add the straps

• Try on a delicate and comfortable nightgown

How to sew a female nightie for pregnant women?

A good option for future mothers is a shirt consisting of a skirt and a bodice. In the expanded lower part, in the form of a trapezoid, a growing tummy will fit well.

We proceed:

• The detachment bodice is 1/2 of the chest girth, plus 10 cm
• We add from 30 to 50 cm to the width of the bottom, depending on the desired width

• We cut the bodice using a top or T -shirt, after applying the finished product on paper
• Next, circle the contours, making an allowance 3-4 cm at the edges

• We make the back of the upper part in the form of a rectangle equal to the width and height of the anterior cut

• We cut out, in an oblique: rectangular parts for the straps, finishes of the bodice

• We make folds along the upper part, on the back and front of the skirt

• We emphasize the shape of the bodice with tucks: depth –2 cm, high - 4

• Combine both parts with the front side inside
• We fix it with pins

• We grind, hug the upper and side seams
• We start with braid, sew the straps, process the hem

How to sew a female nightie for nursing mothers?

• Using a simple pattern, we sew a shirt with a cut, for convenient access to the chest
• For 44-46 size, 1 meter of knitwear tissue is 135-150 cm wide
• The necessary measurements are indicated in the photo patterns

• Having cut the fabric, grind the sides and shoulders of the product, heminate the hem
• We finish the neck and edges of the armhole, which we extend in the form of ties
• We retreat 20-25 cm from the center of the front neck, attach 2 rows of bobbin elastic bands, leaving the distance between them 2 cm

An important condition, when sewing at night shirt, is the choice of fabric.
It should be pleasant to the touch, soft and necessarily natural. Then the product will give comfort and comfort, and the dream will be pleasant and strong.

Video: Nightshine for a girl (nightgown) with your own hands