How to sew shorts with your own hands: preparation for the process, pattern diagram. How to remove measurements

Many are interested in the question of how to sew shorts with your own hands. After all, now they have gained particular popularity. In this article you will find a detailed master class on sewing products.

Content

For a hot summer, shorts are an indispensable thing in the wardrobe, and, not only in children, female, but also male. Thanks to them, you will feel comfortable. And they also look very remarkable. Such clothes can be bought in any clothing store, but sewing them will be much more interesting. They are ideal for your figure because you will take into account your individual physique characteristics, and adjust the pattern for your parameters.

How to sew shorts with your own hands: choice of matter, preparation for sewing

When choosing a material for this type of clothing, you should take into account for which season the thing will be intended. For summer, it is better to use light fabrics and preferably natural cotton (flax, light jeans). It is also good and comfortable to wear shorts if Elastan is present in the material. They fit the figure beautifully and stretch.

For sewing, not much material is required as for a dress, it is enough to take a section of thirty centimeters longer than the length of the product. But the width of the fabric can be different, depending on the width of the hips. If the fabric is narrow, sometimes you have to take two lengths of shorts, especially when it is necessary to sew wide shorts, or a person has a large volume of the hips.

To design the inside of the pockets, fabrics with a thin texture are more often used. When sewing light shorts from chintz, linen materials, the main fabric or lining can be used for pockets.

To design the belt, a special strip of adhesive tape may be required to give rigidity. It is advisable, if necessary, prepare a zipper at once, otherwise you will have to visit the store again to buy it.

IMPORTANT:Consider the features of your figure when sewing shorts. Short models are suitable only with slender, long -legged girls. Women with the size of XL - make products of free cut.

How to sew shorts with your own hands: measurements, modeling

It will not work without a pattern without a pattern. Modeling the product must be carefully. Do not miss any little things in the scheme. The success of the further process depends on this.

To make a beautiful thing, correctly remove the measurements. To do this, measure:

Half -out the waist - SWEAT
The length of the thing - DI
Half hips - Vict
The length of the product on the side seam - DBSh
The height of the waist from the beam muscle.

For free tightening, you can add 1-2 centimeters around the edges if you like wide things. For classic models, five centimeters are added, especially in cases where the material does not stretch.

Ordinary shorts are covered in a trouser model. Above is the pattern of shorts, bridges in one figure. It is perfect for free elastic products from above without additional details.

Below, see the finished scheme of wide shorts. It is easy to draw it, just substitute your sizes on the lines of the waist, hips and make allowances for free fit.

Here are the free shorts of Bermuda with a long knee. You should only transfer it to a real -size paper and you will receive a L. size model.

How to sew shorts with your own hands: sewing shorts

So, after cutting the schemes on paper, prepare the following materials and tools:

Fabric - knitwear or jeans with elastan
Chalk, scissors, pins, needle, threads, belt tape
Fabric for pockets, sewing machine, overlock, lightning.

Stages of the process:

Transfer the cut part from the paper to the material. Add two to three centimeters to the seams. For shorts with lapels below, you need to add four to five centimeters to these lapels.
When all the details are outlined on the canvas, cut them with scissors. Do not forget about your pockets, their inner part and belt.
Sewing the products start on the line on the sides. Just fold the details of the cut with the front side inward. Do the seams symmetrically on both side.
After stitch the inner part of the shorts - trousers. And make a line on the back, and overwhelm all the edges with a zigzag. So the fabric will not be twisted.
Put the zipper in front, if the snake is conceived from the side, you can sew it there, most often they sew the zipper on the side so that it is imperceptibly.
Next, take care of the inner part of your pockets, stitch them so that when you turn your pocket you can not see any external seams. So that the matter does not fall on the pockets, also overhand the edges of the details. Now decorate the front part of your pockets neatly, smoothly and beautifully.
If the shorts are made of denim matter, then you need to make a double line with a special needle, make sure that they are even and then you can’t distinguish the product from real denim shorts. It also does not hurt to stick rivets, which can also be bought in fabric stores. Select the same rivets for the product.
It remains only to arrange the belt and the lower part of the shorts. For the bottom, it is enough to double the fabric, iron, fix it with pins and make an even seam.

The belt must be made hard to keep in shape. Such a product is suitable for the classic model of shorts (see the picture below). Make the part as follows: fold the material for the part double, so that the wrong side is on top. The belt will be tied and expand slightly to the edges to get a nice bow when you tie a belt on shorts.

Now, so that the belt does not go from side to side, fix it with pins after ironing it and make a line of seams.
But this is not all, in the inside of the product you need to insert the tape so that it resembles the shape of this part of the product and glue it with an iron inside. After turn the belt and carefully defeat the seams, corners of the product. It is recommended to cut off part of the inner bends so that the corners are not too thick.
Now you should make a line on top on the front side to fix the edges of the belt. But before that, overwhelm the internal edges of the details of the belt. This belt will be a decoration, it is put on tops on the shorts, stretching into the loops on shorts. The loops are sewn on the first belt, which is directly attached to the product.
Denim shorts are often decorated with a leather accessory, such a belt with a beautiful plaque is more suitable for jeans.

How to sew shorts with your own hands: Ideas

IMPORTANT:If you have learned to make the main scheme, you can cut out other models of shorts for rest at sea or business - under a jacket.

It is not easy to figure out the first time how to create shorts yourself, using patterns of patterns and step-by-step guides on online products. However, if there is a desire to master something new, you will succeed. The main thing is to have perseverance, patience and work on the result. So you can in the future sew different models of clothing, or maybe come up with your exclusive things that customers will be popular with customers.