In this article, you will learn how to sew a convenient swing baby with your own hands. There are also useful tips on sewing the product and the selection of quality fabric for newborn clothes.
Content
Women are always trembling about their young children. They pamper them and try to make them something with their own hands. I always want to dress my baby, elegant, brightly, so that the clothes on the baby are different from the one that is sold in stores. Therefore, mothers and sew comfortable things to their children.
In particular, the usual swing with or without anti -ticaras, sewn by a mother, will be better off on a child than store clothing. A loving mother will take into account the size, make a swing of a material that will not irritate the skin. A particle of good energy of a woman will give a newborn calm, even if a baby has a nightmare.
How to sew a swing for a newborn with your own hands - the choice of fabric
Perhaps to choose a fabric for a newborn to sew a swing is the most important part of the work. You can not use synthetics for the child's clothes. Better than cotton fabric, nothing is yet invented by science. For swinging, materials such as flax, chintz, flannel, etc. are well suited. Moreover, warm types of cotton fabric should be chosen in the cold season, and thin canvases are suitable for the summer.
When you come to the fabric store, pay attention primarily to dim materials and the quality of the canvas. If you have chosen natural cotton, then ask the seller if there is an expert opinion that matter is suitable for newborns, whether there are harmful chemical components.
Do not chase cheapness, choose safe materials. The chintz with a grayish-white shade, as a rule, has small, scattered drawings on a white background on the front side, is best for children. After all, the paint does not penetrate through the material. The wrong side of the fabric is not painted. Therefore, the delicate skin of the crumbs does not contact with paint in clothes from such a canvas.
Sitz materials with a smooth -red surface have a color with deep impregnation, and on top of it, manufacturers apply all sorts of patterns and drawings. This fabric is still better not to take.
IMPORTANT: For one, it is enough to take only about thirty centimeters of the material, a small width. It also does not hurt to think in advance how to smell a swing, buy for clasps of a button, buttons, etc.
How to sew a swing for a newborn with your own hands - building a pattern of a pattern
So, after the matter for the swing is chosen, you can proceed to the next procedure. Build the pattern of the patterns, but before that, take measurements. You will need to know:
- The length of the product. Measure the baby from a high shoulder point to the ass. Suppose it turned out 28 centimeters.
- find out half -out the neck Child - let it be approximately 12 centimeters.
- Measure the baby in the chest area and divide the data into two - 24 centimeters, this value is called - half -out of the chest.
After that, you can easily make a scheme-output of the swing. For the process, take a sheet of paper and a pencil with a ruler.
- Start drawing a swing from a rectangle. By vertically, set aside twenty -eight centimeters - the length of the product. Horizontal set off 14 centimeters. This value is calculated as follows: shall be divided in half in half and add 2 centimeters for free fit.
- When the rectangle is ready, arrange the neckline of the back of the back of the swing. From the point, in the upper corner of the rectangle, set aside four centimeters. This value is hoped as follows: the half -wrapping of the neck is divided into three parts. 12/3 \u003d 4 centimeters. After the top of the rectangle, one centimeter must be postponed down. And draw a smooth line connecting these two points.
- Now draw the neckline of the neckline. Again, postpone five centimeters from the same point. We calculate the size as follows: we divide the neck by three by three, we add one to the resulting tiptoe. 12/3 + 1 \u003d 5. Downs the upper corner, lay one centimeter and combine the smooth line of the point.
- Now it remains to draw the sleeves. The length of the sleeve will approximately equal to 13-15 centimeters so as not to guess yourself measure this magnitude and width of the handle in the widest part of the handle.
- Put the length of the sleeve from the alleged shoulder on the pattern. Downs from the edge of the sleeve, set half the width of the sleeve plus 3-5 centimeters for free fit. If there are anti -ticaras, then draw them. But for this, add a few centimeters in length and width so that the baby’s hands are not crowded.
- The bottom of the sleeve of the swing should expand closer to the shoulder. It is advisable to arrange it with a smooth line.
- The side cut of the swing is done as follows: we put two centimeters from the right angle of the rectangle and connect the right point of the upper angle of the rectangle and the resulting lower line.
- The lower line of the swing will be smooth. To draw it, you will need to put two centimeters up on the side cut and draw a smooth line of the bottom.
The scheme is almost ready, it remains to decide how the swing will smell (behind, or maybe in front). What should be the width of the smell itself and shape. Someone loves rectangular shapes, and someone rounded. Here, given this and draw it in the diagram.
How to sew a swing for a baby with your own hands is a step -by -step process
The resulting pattern of the pattern is only the fourth part of the product. Therefore, do not get confused when you cut the front of the swings and back.
- If the smell is in front, then you will need two parts of the gear and one part of the back. First, cut the two parts of the gear on the fabric, just have the pattern economically so as not to use a lot of material. And be sure to make allowances for the seams. For cutting the back, fold the material in half so that there is no seam in the middle of the product.
When you transferred all the details of the cut from paper to the fabric, now you can cut them. And proceed to sewing the swing. - Fold the front parts of the product and back to each other. And sew the seams with an overlock. If not, cars, then make a seam manually, and for beauty you can choose bright threads of different colors.
- Try not to tighten the thread strongly when sewing swings, make neat, even lines, because they will be in sight. On the typewriter, you can use a zigzag for sewing the swing, but the seams made manually more beautiful and softer.
- All these seams are made on the face so that they do not rub the delicate skin of the baby. Maybe not everyone likes it when the product will have to come in to the sutures - in the first place for kids comfort, not beauty.
- But so that it is beautiful, the bottom of the product, the neck, the edges of the smells can be tied with a hook or flashed with a special bromatic ribbon. Even for beauty in front, embroidery is made or pictures are glued. It remains to make fasteners and all the swing for the baby is ready.
- As you can see, you can also sew your crumbs manually. And special skills, great experience in needlework do not need for this. The main thing is to try and put your love into the process. Then such a thing will protect the child from adversity.
Examples of ready -made brawls sewn with their own hands:
Video: How to sew a swing?
