How to sew a tulle heap of tulle, mesh, lining fabric for a lush and direct children's and adult dresses and skirts: patterns, description, video. How to properly impregnate a upbinder for a children's and adult dress at home?

Patterns of upsurges.

With the help of this not very expensive material, even the simplest sundresses and dresses look incredibly chic and elegant. Due to its versatility, Fatin is used to create a bright dance image, and for a delicate and lush wedding, and even for the usual romantic one. Today we will dwell on chic magnificent heights of tulle and nets. So, let's begin.

How to sew a lush pink made of tulle, grids for children's and ballroom, transparent, openwork dress: patterns, description, photo

Fatin - Light mesh fabric, which in our time is widely used for the manufacture of beautiful magnificent upsurbs for both wedding, ballrooms and ordinary dresses. Also, decor items, such as ribbons, bows and even flowers, are made from tulle.

The mesh material (mesh) is also very in demand. Very often, with the help of this fabric, the main material is complemented. Thanks to the grid, increase the splendor of the product.

A variant of a dress with a lush verteb ashobilor or grid is perfect for small fashionistas. Thanks to the magnificent hem, the dress looks much more beautiful and elegant. It often happens that the time for sewing such a product is extremely small, it is in this case that this simplest version of a magnificent upsurge for your princess will come to your aid.

• We take 50 pieces of tulle or grid, depending on what you have chosen. All pieces should be the same size, if you find it difficult with their size, make standard - 45x15.
• Next, we measure the hips of the baby’s hips and multiply the resulting figure by 3, and also do not forget to add a pair of “spare” centimeters.
• We take an elastic band for clothes (it should tightly wrap the waist, but do not press) and tie it. We place the resulting elastic band in a place convenient for you so that pieces of fabric can easily be tied to it.

• We take a piece of our pre -prepared tulle and stretch through the elastic band. At the same time, the same segments should remain on each side of the elastic band, then we connect the ends of the stripes with each other. It is very important that during these manipulations the elastic band remains in the starting position, that is, not twisted.
• We do the same with all Fatin. Try to distribute the strips evenly, otherwise it will be bad to look like our lift.
• After a strip of tulle, you need to sew on the elastic band.
• For practicality and beauty, the ends of the tulle can be scheduled. Our simple upsurge is ready.
• Also, this option is perfect for medium in length and short ballroom dresses. In this case, it is not scary if Fatin looks slightly from under the dress, you can take material with sparkles, drawings and patterns. Such additions will add brightness dresses.

Fly lush heap of tulle for a transparent dress We suggest sewing in the following way:

• First you need to take 4 meters of tulle and about 1-1.5 m lining fabric.
• We need lining fabric for the base, and the basis, in turn, is needed so that our Fatin is reliably fixed, and the process of wearing a thing does not cause discomfort.
• So, from fabric for the base we must find 4 flaps, their shape should be cuneiform. The dimensions of these flaps should be calculated as follows: their length is about 3 cm less than the length of the skirt, and the width depends on the style, but it is not worth it too narrow.

• Now all the rags need to be sewn so that in the end we get a whole canvas.
• We proceed to the preparation of Fatin. It must be cut into strips of 1.7 m x25 cm, then we put these stripes in half and in this form we sew them to our basis. You should draw your attention to the fact that the folds should turn out smooth, and sewing them should be up to the bottom, while the upper fold should close the lower minimum of 3 cm.
• This type of upsurge can be safely sewn not only for a transparent dress, but also for openwork. Pay attention to the fact that for an openwork dress, the upsurge must be sewn definitely shorter than the main product, and make sure that the pieces of the Tatin do not peek out from under the outfit, otherwise all the beauty will be spoiled. We also recommend only tulle for an openwork dress, since the grid can break the product.

How to sew a magnificent hem of tulle, nets for women's, ball, transparent dress in style and skirts Sun: patterns, description, photo

Styleg style - what is it most often associated with? Well, of course, these are bright dresses with magnificent skirts on the heights, as well as costumes in a multi -colored cell. Today we will dwell on dresses.

• Naturally, initially we need the basis to which the height will be attached. When everything will be decided with this moment, we proceed to the choice of Fatin. For sewing the upsurge, for both women's and ballroom dresses in this style, we need about 5 meters of tulle.
• So, let's get down. We take our tulle and cut it with wide ribbons. If it is difficult for you to decide on the width of the tapes, make them about 15-25 cm.
• Now we collect our ribbons and sew them to the edge of the height.
• We want to draw your attention to the fact that for women's dresses the best podzhtnik is best for women, because a hard grid can spoil the dress, and besides, it is inconvenient to sit with such a heap. If you make a lift for a ball dress, in which you need to walk not long, the product is recommended to be made from the grid. In this case, you can choose a grid with sparkles and various drawings. The product from the grid will betray the greatest splendor to the dress.

For a sun skirt The upsurge is sewn on the same principle. The only advice may be the addition of another row of tulle or grid. Thanks to the presence of the second row, you will receive a smooth transition. We sew this tier a little higher than the first, while we collect our tapes not so tightly, that is what will give the effect of a smooth transition.

The simplest option for a magnificent upsurge for a transparent dress is the following:

• We measure the waist girth and divide the result by 16. You need to cut out 4 squares from the fabric. From the calculation of a medium -length dress, we take 100 m.
• We put all the cut squares on each other, and then fold in half 2 times. Then you need to find the central angle and directly cut out the pattern, in accordance with the one indicated in the figure. As a result of all manipulations, we get 4 circles, which then cut as it is shown in the figure.
• Next, we sew all the details and get a magnificent lift in the style of the style under a transparent dress.

How and from what to sew a magnificent upsurge for a wedding dress without rings?

Supervisor for wedding dresses without rings are in great demand. It happens so for the reason that it is the product without rings that does not stand out from under the skirt without rings and thereby does not spoil the appearance of a chic dress. To sew such a lift, follow this recommendations:

1. It is recommended to sew a wedding upsurge from tulle. That is why for starters you need to choose a tulle that is suitable for your wedding dress. Fatin’s rigidity directly depends on the type of fabric from which your outfit is sewn.
2. Next, the length of the dress is measured. Remember that the upsurge should always be shorter than the main product by at least 4 cm.
3. Then we determine the width of the lower skirt of the dress. Choose what the width of the frills and their number will be.
4. Then we measure the waist volume and proceed to the pattern of the base of the upsurge itself. The most suitable pattern will be a half -sun. Do not forget that at the waist you will need to make a small incision, in this place we will make a fastener.
5. Next, we make the number of lesions we need.
6. We already sew the cuts of the frills. You need to do this so that they get the form of rings.
7. After the edge of the frill, it is necessary to sew on the sewing machine. This must be done extremely carefully. Holding the thread, make sure that the folds created are uniform.
8. Now the matter remains small: we sew all the resulting parts (frills) to the base of the skirt. Ready.

How to properly impregnate a upbinder for a children's and adult dress at home?

To date, not every housewife knows how to properly stain things. However, this procedure is sometimes necessary in our time. The starch will help you give your way an unusually magnificent look and a rather perfect shape, the main thing is to know how to do everything correctly.

• For no matter what dress we starch the upsurger, initially it should be washed. This must be done so that after all manipulations with the product there are no spots and divorces on it.
• So, let's move on to the preparation of the solution: you need to take 4 tablespoons of starch per 1 liter of water.
• In a glass of water, we thoroughly mix the entire starch, we pour the rest of the water into a pan and bring to a boil at this time. Next, we pour the water with a starch of a glass very slowly into boiling water, while constantly stir.

• We bring our solution to readiness. Cooking time is about 5-7 minutes. As soon as the liquid becomes transparent, and the consistency will resemble a jelly - the solution is ready. We are waiting for the liquid to cool.
• If you notice that there are lumps in the solution, then they must be removed. To remove them, let the starch fabric through a sieve.
• It is important to know that if your upsurge consists of several tiers, then you need to start starch from the lower tier. All tiers are starch separately.
• So, in order to steal the upbear, lower it into the finished solution and hold it for 7 minutes. At the same time, you can put the thing from side to side, but not remove it from the solution.
• Having taken out the upsurge, it is not necessary to squeeze it, except very slightly.
• After put the product on a pre -prepared surface (cover the surface with a clean sheet).
• As soon as you see that the upsurge is barely wet start ironing.

You can read more about the starch of different types of fabrics here.

How to sew a straight elevator for a straight skirt from lining fabric?

Now we will talk about the simplest and fastest way to make a direct upsurge.

1. We take the lining fabric, or rather its rectangular segment. The length of this segment is even the length of the skirt and an additional 4-6 cm, the width is even hip girth and an additional 7 cm.
2. So, our fabric needs to be folded in half, the front side inward, and then grind the cuts on the width of about 1.5 cm.
3. For the cakes, the top of our heights we turn on the wrong side, about 2 cm and scent along the bend.
4. We take a braid, the size of which should correspond to the size of the waist and put in the backstage. Next, sew the ends.

This variant of the height is perfect for a regular straight dress, and for a transparent narrow one.

Today, by our own example, we were convinced that Fatin and the grid are universal means for transforming simple and “boring” dresses into exquisite nerves of needlework. Thanks to the simple methods provided today, you can easily please yourself and your relatives with a new type of old products. Use our recommendations, do not be afraid to try something new, fantasize, add something of your own and then you will definitely succeed.

Video: How to make a magnificent hem from tulle?