How to sew with your own toy upholstered furniture for dolls: master class, photo. How to sew a puppet soft sofa, chair, bed, pupped puf with your own hands: schemes, templates, stencils, photos

Luxurious puppet furniture with your own hands: simple and understandable master classes.

When a daughter appears in the house, my mother again experiences all her childhood: dolls, fairy -tale houses, delightful outfits and much more. And for needlewomen, this is a real fairy tale - after all, there is an opportunity to do so much with your own hands! In this article we will tell you how to create unique furniture for dolls from textiles and not only. But the most important majority of materials most often lie around the needlewomen idle! These are pieces of fabrics, and delightful remnants of lace and multi-colored laces and much, much more!

How to sew a toy upholstered furniture - a bed for dolls, with your own hands: master class, scheme, photo

In this small master class, we will tell you how to sew a bed for dolls with our own hands. For this we will need:

• The remains of multi -colored or bright fabric;
• foam or sponge for washing dishes;
• 4 lids from plastic bottles;
• A little cardboard;
• The remains of synthetic winterizer;
• A gun with hot glue;
• Ribbons, lace, beads and other decor at will.

We draw the head of the head of the bed, with us it is 8 cm wide and 7 cm high, but you can choose a different size, depending on the size of the doll.

We cut out the head of the bed from cardboard, as well as two parts from Sentepon.

Now we cut out two parts of a fabric with an allowance of 1 centimeter.

We fold the fabric face to each other and sew with a allowance of 5 mm around the entire perimeter, with the exception of the lower part of the headboard. In the corners, we cut the fabric slightly so that it does not pull it when it is turned out. If the fabric is elastic (for example, biflex), then incisions do not need to be made. After that, turn out and fade.

With the bed layer synthetic winterizer, cardboard and cover with a layer of synthetic winterizer on top, sew up as in the photo from all sides.

We pull the fabric cover on top of the synthetic winterizer, which we have previously faded. We correct the seams if necessary so that nothing is puffed. Please note that at this stage the bottom we are not sewing up yet.

How to sew a toy upholstered furniture - a bed for dolls, with your own hands: Step7

And now the time of decor! Around we lay a cord of artificial pearls, but depending on the stylistics that you choose you can lay any decorative cord or tape.

How to sew toy upholstered furniture - a bed for dolls, with your own hands: Step8

How to sew toy upholstered furniture - a bed for dolls, with your own hands: Step9

Also on the head of the head we place cabochons, buttons, rhinestones, or what your fantasy will come across.

How to sew a toy upholstered furniture - a bed for dolls, with your own hands: Step10

The headboard is ready, so we put it off and proceed to the bed. We calculate the length and width of the crib, we have a sponge 8*11 cm. We cut a synthetic winterizer on this sponge, and also add rectangles from all sides so that the sides are closed. In order for you to understand how it is necessary to cut out look at the photo below.

Now we apply a crushed synthetic winterizer on the fabric and with a gap of 1 cm cut out the fabric. Temporarily put it off. We fold and sheat the synthetic winter heal around the foam.

If you have not cut the fabric yet, cut out and tighten the crib as in the photo.

We sew the corners on a typewriter so that they tightly and efficiently pull the bed.

Now, after the cover is well pulled onto the crib, we grab the fabric from all sides with hot glue or if there is no moment.

We also glue 4 legs-lins, if desired, they can also be covered with a cloth, but in fact they will still not be visible.

From the satin tape, we sew a frill (you can also take guipure or repression). It can be chosen or flashed with folds.

We glue the head of the bed with hot glue to the main part of the bed and tightly press the space between the bed and the headboard. It remains to glue our ruffles to the bottom of the tightening of the crib, as well as around the headboard.

We decided that the decor was not enough and glued an additional openwork ribbon. It seems to us that it became even nicer!

They added two pillows: they are sewn elementary, filled with a ball -fiber or several layers of thin synthetic winterizer.

Video: Cradle. Do -it -yourself miniature

How to sew a puppet soft sofa with your own hands from improvised materials: templates, stencils, photos

To begin with, we will show how to “sew” the sofa of eco-leather and pressed cardboard. To begin with, we make the basis of the sofa: we glue several layers of cardboard together (we have a thick cardboard, so three layers are enough), we also attach the back and sides with glue to it.

On the entire inside, we glue the thin layer of foam rubber as in the photo and proceed to the tightening of the sofa.

We calculate the height of the material of the material: the height of the sofa plus the back of the sofa and leave the allowance of 1 cm on each side. Now the length of the segment: the perimeter from the joint of the back with the sidewalls of the sofa in a circle to the second joint. Now we mark the middle on the material and on the back of the sofa, apply glue the moment throughout the material, connect the two centers and pull it first in one direction of the sofa, then into the other. We connect as in the photo.

Also, we glue the strip with the bottom of our sofa so that foam and cardboard does not remain.

Now we need to make 6 identical pillows for the inside of the sofa. To do this, we need to measure the inner part of the sofa and divide into three. The height of the pillows is equal to the depth of the sofa. We take one layer of cardboard if it is thick or several layers, if it is thin cut out the necessary squares, we lay a layer of thin foam for visual “softness” on one side and tighten it as in the photo of eco-wood. We fix the tips with hot glue or moment.

Glue the pads to the sofa, for beauty you can additionally make several small sofa pillows. Our sofa is ready!

And one more option for a sofa for a country house of your favorite doll. To work, we will need improvised materials that will be found at any needlewoman! Cut the back template from dense cardboard (3 mm and wider) or thin plywood.

Duplicate the same template on foam. Combine with a rigid base using hot glue.

We tighten it with a cloth, fixed with a thread and additionally hot glue.

We take nine identical small buttons, tighten them, plan on the basis of a dream for screed (as in the photo) and sew in a stretch so that a beautiful relief forms on the front side.

How to sew a puppet soft sofa with your own hands from improvised materials: Step5

Now we will need a frame of bars or plywood that is at home. We collect a flat rectangle and tighten the front side with a cloth as in the photo. We fix with hot glue.

We put a sheet of plywood or thick cardboard on top and glue in two layers of foam rubber so that our sofa seemed soft and cozy.

How to sew a puppet soft sofa with your own hands from improvised materials: Step9

Now we make armrests as in the photo. If you have a dense cardboard, then you can stick a layer by a layer and get the same armrests.

We tighten as in the photo by foam. We tighten the cloth at the top. We connect all parts of the sofa to hot glue, if necessary, we additionally fix the sofa back with screws to the base.

On top we decorate with a decorative cord and decor to taste. The sofa is ready!

How to sew a puppet soft chair with your own hands from improvised materials: templates, stencils, photos

To make a delightful chair we need:

• Several types of cardboard: foam card, thin and thick (1.5 mm thicker);
• Wooden pin or plastic tube of the same diameter;
• Fleece or thin foam;
• Lining fabric;
• PVA and/or hot glue;

According to the above drawing, we cut out all the necessary details. In order to understand what size you want to make a chair in the drawing is a mark of 1 inch (2.54 centimeters).

We connect the foam and glue at the top with thick cardboard as in the photo. Before moving on to the next step, the whole chair should be glued with thick cardboard and dried at least 6 hours.

Now glue the foam rubber on the back, seat and armrests.

We move on to tightening, as in the photo. For each part of their fabric, glue a thin cardboard for stiffness. Do not forget in the need for step -by -step as in the photo so that you do not have to peel off pieces of fabric at the joints.

Now go to the back of the chair. We glue hard cardboard on the foam card, and foam rubber. The last layer is tight -fitting with a cloth.

How to sew a puppet soft chair with your own hands from improvised materials: Step6

Glue the back to the main part of the chair. At the top of the back, we additionally lay a cardboard with a tightness of fabric so that the chair from all sides looks neat.

The pillow remained and it is the simplest master class in this. Just repeat the sequence according to the photo and at the end fix the pillow on the chair with glue.

And quite a little: we close the bottom with double -sided tissue decor. Previously, we did not prick it, since its height is selected individually.

The painstaking work is done - the chair is ready!

How to sew a puppet soft ottoman with your own hands from improvised materials: templates, stencils, photos

And now we will do not just a bunch for a doll, but a real masterpiece!

We take the plastic elements of the decor and saw off several ends of the same height - the legs of our puff.

Now we take a round base, it can even be a bob from a large tape, but we have a cover from spirits.

We insert the wire - it will fix the doll on the puffer later.

At the top of the bed, two layers of foam rubber or one layer, but thick, we did not have that.

Now go to the elements. We go a little elements to give texture.

And we cover with brown paint, if desired on top of the paint - varnish.

We cover the base with a velvet cloth and make a screed with glue.

Now we glue the decorative tape in order to decorate the puff and at the same time hide the flaws of the screed.

In the meantime, the elements have dried up and they can be treated with acrylic gold paint.

You can also decorate with gold foil. It is done simply: we apply the varnish and carefully press the foil on top of it, wait 20 minutes and abruptly tear off. Ready!

We glue it to the base of the legs (since we have a beautiful black base-cover, we do not cover it with decorative fabric, but leave it to gleam). And our ottoman for dolls of cats!

Video: How to make a beautiful ottoman for dolls?

Video: How to make a doll-chair?