How to sew a baby cloak of carnival and raincoat with a hood for a girl and a boy: patterns, photo. How to sew a cloak with your own hands for a child from rain and a carnival?

The article includes cloak patterns and cloaks for children, as well as instructions for sewing them.

Learn to sew a cloak for your child - a raincoat and a raincoat for a carnival. The cut and sewing in the product are quite simple, you will master them even if you have never done anything like that before.

How to sew a cloak cloak raincoat with a hood for a girl: pattern, photo

The raincoat is an indispensable thing in the wardrobe of the child, especially if it is still small. A waterproof raincoat will protect from rain and wind, it can be run to the store, clinics or just breathe air on the street. If it is not so easy to hold an umbrella for the baby, everything is easier with the raincoat - he dressed and went.
There is also nothing complicated to sew a rain from the rain for a girl with your own hands. Try to do this to feel significant savings. Children grow rapidly, it is likely that the cape purchased in the store will last a couple of seasons.

Important: what should the raincoat in the first place be? That's right, waterproof. It is important to choose the right fabric. Oxford with a polyurethane, a membrane, Taslan or Bologna will suit you.

To sew a little girl so a beautiful and practical raincoat from the rain, you don’t even need to build a pattern. Highlight literally an hour of time and prepare:

• the cut of waterproof fabric
• chalk or baches
• tape measure
• line 1 m
• scissors
• needle and thread
• braid
• glastic
• kulis
• buttons

1. Lay the fabric on the floor or on the table. You will need to draw on it, and then cut the square. To find out the size of its diagonal, measure the distance from 3 phalanx of the middle finger of the girl to 3 phalanx of the middle finger of her right hand (on the left forearm, left shoulder, back, right shoulder, right forearm).
2. If you want to sew a long raincoat covering the hips of the child, you will need to cut out a rhombus with a smaller diagonal equal to the distance indicated in the previous paragraph, and the larger one is the same, multiplied by 1.5.
3. The diagonal of the square will also be needed to make the head slot clearly in its middle.
   Process the seams at the edges: go through them or decorate with braid.
4. For a hood, you will need to draw and cut a rectangle. You put it in half and build it on one side. On the other hand, you turn it up and sew so that you can stretch through the hood of the tie or the cululis.
5. Sew the hood to the base of the raincoat.
6. So that the raincoat does not fly around, the child does not get wet, sew button on the sides on one side, on the other - loops to get a clasp.
7. If you want, you can sew a waterproof skirt into the raincoat. For him, you will need a rectangular piece of fabric. Top on it under it a gap and prick the elastic band, go under the bottom or treat with braid.

Important: the advantage of such a raincoat in the form of a cloak is that it is seamless. You will not have to worry about how to seal the seams than to glue them, for example.

You can also sew a raincoat a la poncho for a girl using this pattern.

How to sew a cloak cloak raincoat with a hood for a boy: pattern, photo

To sew a raincoat - a poncho or a cap for a boy with your own hands, use this pattern.

You will also need:

• waterproof fabric 1.5 m per 1 m
• lace - 1 m
• eyelets, stoppers and tips for the lace
• scissors
• threads
• needle
• buttons or buttons - 4 pcs.

1. Crowify the pattern in the size you need.
2. Cut the details in the right amount: 2 strips, 2 pelering, two hoods, 2 pockets, 1 valve.
3. Transfer the pattern to the fabric, add allowances to the seams of 1 cm and 1.5 cm, cut the parts.
4. Sour the details. Stop the hood. On one side there will be a stitched bend in which you will take the lace.
5. Make all regional seams decorative.
6. Stick your pockets.
7. Attach the clasp, buttons or buttons to the bar, so that the boy does not blow in the neck.

How to sew a carnival cloak of a red hat for a girl?

The red cap in the English -speaking version is not a hat at all, but a hood (Little Red Riding Hood). Therefore, if your daughter has to act as this heroine of a fairy tale in the matinee, Christmas tree, theatrical performance, as an alternative to a red -applied cave -capture, you can sew her a cape with a hood.

Take:

• atlas or Crey Satin red
• silk tape red
• red braid
• glastic
• velcro
• a piece of chalk
• scissors
• threads
• needle
• portnovsky pins

1. Fold the cut of red fabric in half. Use a circuit for a round cloak. If you do not have it, choose a round object close in diameter to the girl’s neck.
2. To draw a large circle, measure the distance from a small circle to the edge of the fabric.
3. Set aside the same distance in both sides along the fold of the fabric. Do not forget to leave allowances on the seams.
4. The floors floors with a decorative seam or treat with braid.
5. Make a hood double. Cut 4 identical parts from the red fabric for the hood.
6. First collect the details of the hood, process the cut. After sticking the hood into the neck of the cloak.
7. From the tape of red and Velcro make the cloak fastener and sew it.

Video: How to sew a New Year's costume of red hat with your own hands? Master class with patterns

How to sew a carnival cape of a cloak on the shoulders for the New Year for a girl?

A cape or pelerine is a very successful addition to the girl’s New Year's costume. If it was the Snow Maiden, Christmas tree, snowflake, squirrel or fox, the image will be completed. In addition, during the performance, the girl will not freeze, even if in the hall at the winter holiday it will be cool.

Important: If you need to sew a handbird costume with a carnival cloak on your shoulders, you will be interested to read the article " How to sew a Christmas tree for a girl for a girl on a matinee in a kindergarten? Carnival costume Christmas tree for a girl from tulle with your own hands: Master class«.

To make a carnival cape, take a pattern as a basis in the figure below. Feel further:

• bring a cape with fur, tinsel, Christmas beads
• with the help of LED garland, make it luminous
• the cape can be dressed over the head, tied on ribbons, laces, fasten the button or Velcro

Look at the photo how the raincoat for the carnival costume of the girl for the New Year may look.

How to sew a carnival cloak of Superman, Batman for a boy?

Boys adore superheroes and simply dream of at least for a while to reincarnate. You can become a Batman on a carnival, just in the game you can, having dressed a mask and a raincoat, attributes with which a feline mouse acquires its unusual abilities.

Important: Batman's cloak is stylized under the wings of a bat. Therefore, a round black cape will be not enough. It is necessary to make the edge of the cloak with the Zazubins.

1. Batman's cloak should be a semicircle with a diameter equal to the distance from 2 phalanx of the middle finger of the boy’s left hand to 2 phalanx of the middle finger of his right hand.
2. In order for the cloak to really resemble the membrane, think about how it will be attached to his hands. You can make a fold and stir it in the form of a tunnel, then the boy will spread his hands into it. But this is not too clever. It is better to sew 2-3 elastic bands on each side.
3. In order for the image of the superhero to be finished, glue or sew on a raincoat its distinctive sign - the silhouette of a bat on a yellow background.

Video: cloak for superheroes with your own hands in one hour

How to sew a carnival cloak of a wizard for a boy?

The carnival costume of a wizard or star for a boy may consist of:

• capes and hats - cap
• cloak with a hood

Use the pattern as in the picture to sew one.

Important: you can already fabric with drawings in the form of stars and patterns or plain, and then decorate it at your discretion.

How to sew a carnival cloak of the king for a boy?

So that on a matinee or costume holiday, your baby reincarnates into the king, put him in a white shirt and trousers, a crown, as well as a cloak - a mantle made by yourself in a pattern below.

For the king’s cloak, select a dense fabric - velvet or velor. Make a fur trim on a collar and a floor.

Video: Children's holiday costume "Starfish"