How to make garden street swings for children and relaxing with metal, wood, ropes, tires, profile pipe, hoop, suspended, bearings: drawings, dimensions, videos, photos. The best, original swings and hammocks to the cottage with your own hands: ideas, photo

In this article, we will consider how to create a swing from different improvised materials at home.

Content

Swing in a summer cottage or garden area are found today quite often. And this is not strange, because everyone loves to swing: from adults to children. By making a swing, you can get great pleasure, both from the manufacturing process and from the final result.

Today there are many types of swing. All of them are different, differ in material from which, for example, of wood, metal, car tires and so on, are made.

How to make children's swings for a vacation of metal: drawings, dimensions, photos

In the instructions made of metal, the frame is usually made by two methods:

Using a welding machine
Collects from different details

To make the first option, you need to have a certain experience with welding and a special device. But you will receive strong and hard supports, thanks to which you can use the swing for a long period of time.

All "attractions" of metal come:

Stationary. Such swings have concrete supports.
Portable. These designs are fixed using anchor bolts, reinforcement, which is clogged into the ground.

To perform the next swing, follow the following actions:

Take the pipes, cut the blanks from them. From the pipes, make 2 side racks of 2 m, the crossbar 2 m, 4 pipes of any size that you will use for the base.
Stir the pipes with a file.
Combine the blanks by folding them at right angles.
Make each rack to the resulting base, then weld the crossbar to the racks.
Next, exhale 4 pits so that their depth is 80 cm.
Insert the metal beams into the pits, while ensuring that the length of each beam is slightly higher than the depth of the pits.
Pour a recess with beams with concrete, preparing it in advance.
Leave the concrete for about 7 days to dry.
Weld the hooks to the crossbar. Make hooks from the anchor.
Weld the product frame to the beams.
Next, attach the seat.

How to make children's swings for wooden relaxation: drawings, dimensions, photos

In order to assemble the next design, prepare:

Rope
Wood
Fence
Elements for fastening
Faner

In order to perform fasteners, take identical bolts. So that the material does not deteriorate over time and retain its own original appearance, apply an antiseptic. Cover them in advance wooden spare parts.

To fix the racks, exhaust the pits with a depth of about 1 m deep. Install the racks in these pits. If you want, make separately concrete pillars separately. Attach a wood bar with anchor bolts to these pillars. Make the design itself, taking the instructions to help.

Make arcs for support. Take the boards so that their thickness is 2 cm 2 mm, and a plywood of pine with a thickness of 1 cm 2 mm. Drink 6 supports according to the scheme.
Open the workpieces to the outlines of the core. Make the central layer from glued stove. In the extreme layers of arc, make cuts for the rope.
Fix the part of your support with waterproof glue. Cut the support using clamps. Remove the clamps when the glue dries.
Go along the edges of each support with a grinding machine, make the supports more round.
Cut round elements from the boards for hanging the rope.
Apply to the supports and round parts a primer.
Through rounded parts and supports, follow the holders of metal for the rope, then process wooden spare parts using acrylic paint.
Next, take the picket fence. Level it.
Drill holes for screws in the strips. So that the holes are neat, put on the edge of each stack of corners.
Scrint each stack to the support. To make the step even, place small planks between the planks.
Attach the armrests to the supports using staketins. Screw the metal bolts into the bar. Place round wooden details between the support and the armrest.
Cut the rope. Pass it through the holes in the armrests. At the same time, the armrests are in progress on the pads, which are installed in 2 half rings.
Close the rope on the coes, tie a rope.

How to make children's swings for relaxation from a rope: drawings, sizes, photos

A strong rope and fabric is a real find from which you can make a magnificent swing for a child.

Option 1

Attach wooden mounts to the stitched piece of fabric.
Next, make a swing of any shape, for example, in the form of a hammock or cocoon. You can attach a wooden chair to the mounts.
Then hang the swing on the ropes.

Thanks to this design, your baby will fall asleep faster. If you make a swing big, you can rest yourself in it after a working day.

Option 2

For this option, you will need to take:

A circle
The rope

Make the seat from the circle and ropes. Weave the rope in a circle or a cross. Such weaving can take a lot of time from you, but this option is considered very convenient, safe and universal. Piece the seat by the ropes so that it hangs almost above the ground.

How to make children's swings for relaxation from tires: drawings, dimensions, photos

From tires you can make many swings for both adults and children.

Option 1

Make an excellent swinging swing using a strong tire of small size. Follow these actions:

Choose a tire. Rinse it carefully.
Using the rym bolt, make a fastening from the side of the flat side, where you will attach a chain or rope. You can make 4 or 3 supports. In the first version, screw 2 bolts from 2 sides of the wheel so that they are at an equal footing. In another version, screw the bolts at the angles of 120 degrees to form a triangle with equal sides. Calize the places where the mounts will be located so that the swing does not overwhelm.
Carefully fix the ropes or a chain to the base.
Connect the suspensions to the hooks that are on the wheel. Strengthen the swing so that it is parallel to the ground.

Option 2

This design is considered more complicated, but it will certainly decorate the playground. In addition, if you have a sharp knife, you can handle work without any problems. Make a swing by performing such manipulations:

Cut the upper edge of the tire with a knife. Leave the rim intact.
On top of the “pens”, using bolts, fix the brackets thoroughly.
Attach the rope or chain to these brackets, tied the nodes.
Cut the ends.
Check the seat so that it is durable.

Option 3

For the next swing, you will have to perform the following processes:

Cut the tire into 2 equal parts.
By 1 half for the cut, screw the board using screws, polishing it in advance.
From the 2nd sides of the boards, make 2 holes, hang a thick rope into these holes - in this way you get pens.
Paint the design with bright paint.

How to make children's swings for relaxation from a profile pipe: drawings, dimensions, photos

By choosing all the necessary tools and materials, you can start assembling the overall design. The process will consist of 4 stages.

Stage 1

Mark and cut the pipes of the required length according to the drawings.
Stir the sections on the pipes, remove the chamfers from the sections before welding.
Level the place where the swing will be placed. If you need concrete, prepare the pits in places of mounting supports.

Stage 2

Place 2 pipes with a large section tightly to each other. Weld them.
Weld jumpers that have a smaller cross -section between the supports in the center and below (if the support is formed in the form of the letter A). If you make support only from 1 pipe, then you need to weld the struts to it.
In the upper part of the corner, where the pipes are connected, cut the top - so you will get a support that will hold the transverse crossbar of the frame. Fasten the joint of the corners, weld a metal plate.
Boil another identical support.

Stage 3

Prepare the crossbar. On this crossbar, perform fasteners (2 pcs.) At the same distance from the edge of each node so that they correspond to the size of the seat. You can take a thick rod for this. Make rings from it.
Make the crossbar to the upper part of the side supports. Do it carefully so that the right corners are not violated. Strengthen the corners by welding to them metal plates. If you plan to concrete supports, then set them in level, wait until the concrete froze, then only attach the bearing crossbar. In the event that you do not concrete racks, then weld the base of a rectangular shape to them almost above the ground, making from profile pipes. Then attach to the ground using long metal brackets.

Stage 4

Make the bench from the pipes: straightforward or with bends. Take the armrests. Weld them in the side parts of the product.
In the frame, drill holes to fix the boards.
Weld the suspensions made of professional pipe to the frame of the bench. Attach the suspensions from the chain to the corners and use or use bolts with qm gikes for such work.
Prepare the planks.
Grind and paint a metal frame, as well as a bench.
Attach the flooring of wood to the frame of the bench with bolts. Keep in mind that the hats of bolts should sit tight on the boards, even “drown” in them.
Stick the bench to the frame.

How to make children's swings for relaxation from a hoop: description, photo

To make such a swing, take:

A hoop made of steel used by gymnasts
Foamen
The rope

Execution process:

Take 2 ropes, throw them through each other in the form of a loop, tie them to a hoop.
Also do it again, only make the angle so that there is a perpendicular angle between the ropes.
Repeat the power of the ropes at different angles.
Then, on the resulting frame from the ropes, perform a circular flying in the form of a web. Drive the second rope in a circle, fix these ropes with knots in those places where stretched ropes intersect.
When you weave the web, the rim is wrap the rim with a rope so that the nodules do not slide on the basis, do not gather in a heap. You can put foam rubber under the rope.

How to make homemade children's swings hanging?

The hanging swings are very diverse. Use our recommendations and make such designs yourself.

Option 1

For this swing, take:

Wooden board
The rope

Execution process:

In the seat board, drill holes, in them, pass the rope so that it goes into 1 hole, and in 2 holes comes out.
To strengthen the structure, add a board under the seat in both sides of the plank. At the same time, in these planks, also drill holes, passing the rope through them.
Hang the swing on any support.

Option 2

This model will also need simple materials:

Chain
Metal triangle
A dense tarp

Execution process:

Hang the metal triangles on the chains.
Through the triangles, pronounce a tarp.
Bend the edges of the tarpaulin down, put a couple of large rivets.

Instead of rivets, you can use ordinary bolts and nuts. But so that the bolts do not break the hole, put metal gaskets under them.

Option 3

For such a swing, take:

Small chair
Fat rods
The rope

Execution process:

Put the rods under the seat. Put 1 rod under the seat in the back of the back, 2 rod, put the seat in front.
Cut the holes in the corners of the chair.
Take a rope into the forming holes.
Tie the tips of the rods with these ropes.

How to make children's swings for recreation on bearings: drawings, dimensions, photos

To make a swing on bolts, purchase the following materials in advance:

A pipe with a diameter of 5 cm and a length of 1 m 50 cm
A pipe with a diameter of 6 cm 3 mm and a length of 6 m 20 cm
A pipe with a diameter of 2 cm 4 mm and a length of 8 m 40 cm
Bearing (inner diameter 3 cm, length and external diameter 8 cm 5 mm) - 2 pcs.
A pipe with a diameter of 2 cm 7 mm and a length of 1 m 20 cm
Pipe with a diameter of 9 cm and 1 m long
Corner 59 2 m long
Profile pipe 2 cm x 2 cm x 2 mm long 5 m
Chain 7 m long
Metal plate 5 cm wide 5 mm high 2 m long

Execution process:

Cut the pipe with a diameter of 6 cm 3 mm for steam of identical parts. Make a pipe with a diameter of 5 cm to these blanks.
Attach the structure on which bearings will be installed on the frame. Cut small pieces of pipe with a diameter of 9 cm, approximately 5 cm. Insert the bearings into these pipes, scurry, while squeeze the pipe, narrow the bearing itself outside. So that the bearings could not fly off the pipes, attach small metal pieces on the outside. Between these pieces, install a pipe in the inner hole, the diameter of which is 2 cm 7 mm.
At this pipe, attach the plates to which carbines will be attached. Attach this design to the top of the frame using small plates. Before attaching the bearings, grease them well. And when you carry out hobs, constantly cool the structure with water.
When prepare the frame, dig pits under it, pour them with concrete, attach the slopes.
Take a profile pipe 2 cm 2 cm 2 mm, make a seat out of it.
Using bolts to the frame, attach wooden planks, only polish them in advance. Approx the resulting frame to chains, put them on carbines.
Paint the entire structure.

How to make a home -made hammock for your own hands: ideas, dimensions, drawings, photos

Gamak is a bed that is suspended on special supports. Gamak can be different options. One of these we suggest you make yourself.

For him, purchase the following materials:

Dense material - 120 cm x 220 cm
Sling or dense fabric
Strong rope

Execution process:

Take the fabric, turn its edges. Process the edges on the sewing machine.
Cut the strips from the tarpaulin so that their width is 5 cm and the length corresponds to the main material.
Make the loops: Cut the sling into identical pieces of approximately 20 cm. Make 20 loops.
Sew the loops to the edges of the product so that the same distance remains between the loops.
Pass the ropes in the loops. Collect the ends of the ropes, tie one loop from them, make a knot.

When you make a hammock, hang it in the garden in your favorite place. Traditionally, such materials as: metal or wood are used for the manufacture of swings. In order for the design to be more reliable, it has a beautiful appearance, you can combine these materials or supplement them with decorative forging.

Car owners are often used to perform a swing tire, since they perfectly harmonize with floral flower beds made of the same material. Do you want to have a place to relax in the garden in the summer? Hang the swing in the garden or in the country, enjoy nature and relax with your family.