How to make beautiful pots for flowers for the garden, cottage, wooden streets, from cement and fabric, gypsum, plastic bottles, tires, chamomile with your own hands. Swan Kashpo from gypsum: a master class with a detailed description. How to buy pots for flowers on Aliexpress?

How to make beautiful pots for flowers for the garden, cottage, wooden streets, from cement and fabric, gypsum, plastic bottles, tires, chamomile with your own hands. Swan Kashpo from gypsum: a master class with a detailed description. How to buy pots for flowers on Aliexpress?

In this article we will talk about how to make yourself beautiful and comfortable flower pots.

Any fan of Flora knows that even the most pretty flower beds risk being unnoticed without appropriate design. Creation needs a decent framing. That is why the creation of a unique pots is a good idea!

Swan Kashpo from gypsum for flowers for the garden, cottage, streets: master class with detailed description

Kashpo in the form of a swan and looks attractive, and is quite functional. Gypsum general and resistant to weather changes. To create such a pot You will need:

  • Gypsum - about 5 kg.
  • Sand
  • A plastic bottle of about 5 liters.
  • The wire is thicker
  • Long strip of thin fabric or bandage
  • Black, white and red colors
  • Primer
  • 2 lattices
  • Brush, sandpaper, spatula

Important: it is recommended to add PVA in the amount of about 1% of the total volume for the solution of the solution.

So much is required to need a gypsum for kashpo-legged
So much is required to need a gypsum for kashpo-legged

So, we proceed:

  • The bottle must be put so that The wide side was directed down. At the same time, the one that on top, it is worth cutting. In the resulting container, pre -moistened sand must be poured.
  • You need to insert into the neck wire curved in the shape of a swan neck.
  • Further, using a spatula, it is necessary apply gypsum to the walls of the bottle. The thickness of the layer should be approximately 2 cm. You can align with a wet brush.
  • Now is the time attach grilles on the sides. They are crushed, and a little more gypsum is applied from above.
Imitation of the wings of Kashpo-Labed from gypsum
Imitation of the wings of Kashpo-Labed from gypsum
  • It is worth covering with gypsum and wire, immediately laying it with the top is a bandage or fabric.
So you need to wind a bandage around the neck of a swan-kashpo
So you need to wind a bandage around the neck of a swan-kashpo

Important: as soon as the first layer of material dries, it is necessary to apply a little more gypsum on top. It is advisable to align it with a brush.

  • From small pieces of wire you need make a bird tail, generously covering his gypsum.
  • Now the workpiece under the pot should be left alone until complete drying - It takes approximately two days. After that, you can bring the swan to perfection using fasteners And cover it primer.
  • The final stage - poultry staining.

Important: do not forget to get the sand laid in the bottle at the very beginning of the manufacture of casop!

This is what swans-kashpo from gypsum looks like
This is what swans-kashpo from gypsum looks like

How to buy a ready -made pot for flowers for Aliexpress?

If there is no way to make such a wonderful pots with your own hand, you can always contact the online store Aliexpress. How to find the cherished product? First of all, beginners are recommended to familiarize themselves with text instructions about using the site or with video instruction.

Now you can talk about Kashpo:

  • In the main menu on the left, you need to choose a heading "For home and garden", and in it in the category "Home decor"DIY DIY "
So you need to start the search for kashpo on Aliexpress
So you need to start the search for kashpo on Aliexpress
  • In the menu on the left you need to click "House and garden"
The second stage of search for Kashpo on Aliexpress
The second stage of search for Kashpo on Aliexpress
  • Next, it should be clarified that the goods are needed "For the garden and the garden"
The third stage of the search for Kashpo on Aliexpress
The third stage of the search for Kashpo on Aliexpress
The final stage of the search for Kashpo on Aliexpress
The final stage of the search for Kashpo on Aliexpress

Important: it is recommended to immediately set the category " Gardener" - it will help save time on finding a pot for the garden.

Choice material It is wide enough - this is, for example, plastic, ceramics, cement, wood, glass, iron etc.

Color palette It also pleases with diversity - browngreen, yellow, blue, white  And many other shades will certainly revive the site.

For the garden perfectly suitable as big, so giant Models.

You can also immediately indicate suspended I need a pot or maybe I want to organize vertical gardening.

Curious fact: visitors Aliexpress have the opportunity to immediately choose even style Kashpo - modern, rustic, classical, european, cartoon, chinese, american, mediterranean.

The online store will help with the choice of preferred finishes: manually carvedkashpo, glazed, with vinyl coating,  with powder coating, galvanized models etc.

How to make beautiful pots for flowers for the garden, cottage, wooden streets with your own hands?

Kashpo, made of wood, not only look original, but also provide good soil thermal insulation. The easiest option is use boxes or pallets.

Important: it is advisable to treat wood with a means that protects against ultraviolet radiation. It is recommended to initially choose a varnish or paint with a similar filter - for a pot located on the street, they are indispensable.

Boxes can be adapted for spectacular pots
Boxes can be adapted for spectacular pots
A wooden box installed on part of the old cart is an unusual and spectacular pot
A wooden box installed on part of the old cart is an unusual and spectacular pot
Kashpo from wooden boxes can be painted in any shade
Kashpo from wooden boxes can be painted in any shade

If you want maximum naturalness, the most ordinary Stump, logs and decks. Such a pot is made as follows:

  • With the help of a bite and a hammer, you need clean the insides of the stump of dust. If the core is strong, you can pre -make several pits in it with a drill.

Important: it is extremely important not to overdo it - the walls should not turn out thin.

  • Now you need to process kashpo means from moisture and insects.
  • They fall asleep inside drainage, soil.
  • Recommended make small slots In order to prevent stagnation of water.
Kashpo-Pen
Kashpo-Pen
However, if you wish, Kashpo-Pen can be decorated somehow
However, if you wish, Kashpo-Pen can be decorated somehow

How to make beautiful pots for flowers for the garden, cottage, streets from cement and fabric?

The easiest recipe This is:

  • Some old the fabric must be wetted in a solution of cement

Important: should be soaked carefully - there should be no sections not affected by cement.

  • Until the fabric has dried, it follows it cover the buckets
This is how to place the fabric on the buckets for the pots
This is how to place the fabric on the buckets for the pots
  • Buckets They are exhibited in the sun to complete fabric
  • Now it remains only paint the fabric and remove it from the bucket
And so the pots look already at the final stage
And so the pots look already at the final stage

You can try to complicate the task by making fabric flower. This will help ribbonwhich is desirable to tie the foundation of the composition. Large pins They will help to form petals. It is very convenient to produce fielding enamel paint or product in the form spray.

Cashpot flower from fabric and cement
Cashpot flower from fabric and cement

How to make beautiful pots for flowers for the garden, cottage, streets from plastic bottles of 1.5 and 5-liter?

Most simple and quick way The manufacture of pots from plastic bottles of any volume is as follows. In the lateral part, you need to make a hole. Sufficient sizes so that there you can pour lands and plant plants. That's all: the pot can be placed between the branches of the tree, and enjoy the view.

If there is a desire you can decorate Kashpo with some element like a butterfly made of multi-colored paper or bright fabric.

The simplest pots from a plastic bottle
The simplest pots from a plastic bottle
You can build such a series of suspended pots on red ropes in the garden
You can build such a series of suspended pots from plastic bottles on red ropes in the garden

You can try to make charming pigletswho will look cute on any site. For such kashpo you will need:

  • Bottle 5 l - 1 pc
  • Bottles 1.5l - 4 pcs
  • Black buttons or plastic eyes for toys - 2 pcs.
  • Wire - 15 or 20 cm
  • Pink acrylic paint
  • Super-blade, brush and knife

Sequencing The following:

  • From small bottles necessary cut off the tops with lids. Here the knife will come in handy

Important: it is advisable to make an incision not evenly, but obliquely.

  • A kind of non -waste production, since the remains of plastic You can let it go on the ears
  • On a large bottle should be carefully Mark places for the eyes, ears, tail and legs
  • Now stands on drawn lines make slots For all of the above
  • The legs need to be inserted in the holes, fixing them with glue
  • The same is worth it fix your ears and wire tail
  • Need glueand eyes
  • After complete drying, the workpiece is necessary paint, drawing a hoof and a patch
Such pots from bottles can be placed on the site
Such pots from bottles can be placed on the site

How to make beautiful pots for flowers for the garden, cottage, streets from the tire? Decorative pot in the form of a rooster

Rubber is characterized excellent resistance to various weather manifestations. Therefore, as a material for a cashpot, a tire is an excellent option!
Even from a nondescript tire, you can make a colorful cash Cashpo. And for this we need:

  • Shina itself

Important: the tire is necessary without a metal cord.

  • A drill, the diameter of which is 10 mm
  • Drill
  • Nuts, bolts, pucks of size M8
  • A well -sharpened knife
  • Detergent or liquid soap - in them, to facilitate the work, it is periodically desirable to wave a knife
  • Paints

Procedure:

  • You need to do it in the tire first cutsObserving symmetry. As shown in the figure
Thus, it is necessary to calculate the incisions on the tire for caspo
Thus, it is necessary to calculate the incisions on the tire for caspo
  • That part that cleaned in red, standing carefully take off
  • Then the workpiece is needed turn out, giving it the shape of a frame for a parrot
  • In a smaller part The blanks located between the sidewalls should be done longitudinal incision
  • From the cut part of the tire you can cut the beak. It must be placed in an incision
  • For the best fixation, it is recommended to drill in the beak of a through holethrough which you can then Pass the bolt

Important: it is recommended to use the struggle to fix the beak.

  • Long part The blanks are useful for forming tail
  • Now remains Follow wire or rope frame And do decorating Birds
Kashpo-stump from the tire
Kashpo-stump from the tire

According to a similar scheme, you can make kashpo-Petukha:

Rooster-Kashpo from the tire
Rooster-Kashpo from the tire

Do -it -yourself flower pots for vertical landscaping: photo, description, diagrams

In order to arrange vertical landscaping on the wall of a residential building, arbors or on the balcony, the next master class is perfect. For him we need:

  • Wooden plates
  • Saw
  • Drill, jigsaw
  • Metal ring, rope
  • Sandpaper
  • Brush and paints
  • Vazons

Created The design is as follows:

  • On wooden plates need apply pots Up the bottom. Kemka The pot should be circle.

Important: at least 5 cm should be retreated from the outlined circle.

  • Using a saw, you need to make squares.
  • Now inside the first circles You should draw another one. Their centers should coincide with the centers of the first, but it is recommended to draw diameters per centimeter or two less. It all depends on how much the pots expand up, and on how much they should rise above the pot.
For convenience, you can circle a smaller pot when creating a pot
For convenience, you can circle a smaller pot when creating a pot
  • Circles of smaller diameter need cut out. First, it is recommended to work with a drill, and then you can connect a jigsaw to the case.
As a result, pots should fit inside such caspoles
As a result, a pot should fit inside such a pot
  • In the corners Each square is necessary drill holes In order for the plates to be suspended.
In the corners of the workpieces under the pots, you need to cut small circles
In the corners of the workpieces under the pots, you need to cut small circles
  • Essential paper follows remove all irregularities. Only after the completion of this leveling can you begin painting. You can also decorate pots with paint.

Important: if the painting is not planned, it is recommended to give preference to the processing of wood with an antiseptic.

You can paint not only pots, but also pots
You can paint not only pots, but also pots
By the way, they look great on a plain background on a pot and pots careless white strokes
By the way, they look great on a plain background on a pot and pots careless white strokes
  • Now you need cut off four ropes - For all angles of records. The length depends on the desired number of tiers.
  • Every 25 or 30 cm Each rope needs Tie strong nodes - They will help the planks hold on to.
Kashpo boards should be located strictly horizontally
Kashpo boards should be located strictly horizontally
  • Now it remains pass the ropes through the metal ring and to tie a knot.
This is how the pots for vertical landscaping turns out
This is how the pots for vertical landscaping turns out

Stand under the pot It is worth fastening only Under the lowest. In this case, after watering from the upper tier, the water will enter the lower. However, on the street you can do without stands at all.

Important: in order to avoid land loss, filters can be laid on the bottom of the pots. For example, coffee.

You can use for vertical landscaping also the following schemes:

Arca-Kashpo for vertical landscaping
Arca-Kashpo for vertical landscaping
Here's another cashpot scheme for vertical landscaping
Here's another cashpot scheme for vertical landscaping

Decorative pots for flowers with figures in the form of a horse: photo, description, schemes

For kashpo in the form of a horse you will need:

  • The cuts are rounded - 4 pcs. Of these, 2 saw large and 2 - smaller

Important: all of them should have a good thickness.

  • Brings made of wood
  • Pieces of boards
  • Broom
  • Tools like a jigsaw, screwdriver, drill, ax, chainsaws, screws

It is made Horse like this:

  • Small follows cut your head, as well as tail and ears.
This is how the blanks for Kashpo-Rashad look like
This is how the blanks for Kashpo-Rashad look like
  • Now the boards need to be beaten around the perimeter of large saws. In this case, it is necessary to leave the free space for placing pots on top.
So you need to beat the boards to the spiles
So you need to beat the boards to the spiles
  • Two big circles need near the boards from below.

Important: you can use self -tapping screws.

So the future Kashpo-louder looks from the inside
So the future Kashpo-louder looks from the inside
  • It remains to make another board from another board neck, attach a head to her. It stands to the head attach ears.It is interesting to add and eyes.
This is what the Kashpo-Rashad looks like in the end
This is what the Kashpo-Rashad looks like in the end

Cashpo for flowers with your own hands suspended: photo, description

For a suspended pot of leather, you will need:

  • Leather square approximately 30x30 cm
  • Leather rope or laces from this material - 4 pcs. Each length of each - from 90 to 120 cm
  • Dye designed specifically for skin processing, gloves
  • Purified water
  • Tracing paper in size 21x28 cm
  • Chancellery knife, pencil for drawing
  • Tape for packages
  • Sponge

Procedure:

  • On tracing paper is necessary draw a template, depicted in the picture below. Then it stands attach to the inside leather piece.

Important: fastening must be carried out away from the edges.

This is how the tent for a suspended pot is attached to a piece of skin
This is how the tent for a suspended pot is attached to a piece of skin
  • Now necessary soften a sponge in distilled water, and process it with the front side of the skin. Moreover, it is advisable to repeat this procedure several times - so it will be much easier to work with the skin.
So you need to treat the skin with a sponge for a suspended pot
So you need to treat the skin with a sponge for a suspended pot
  • Now necessary cut the drawing on the tracing paper with a pencil. It is better to press with average strength.
Flooding for a leather suspended pot
Flooding for a leather suspended pot
  • Then you can remove tracing paper. With the help of an office knife, you need make incisions along the lines that were drawn thanks to the template.
Cutting lines on a pre-prepared circle-battered pot
Cutting lines on a pre-prepared circle-battered pot
  • If there is a desire additionally paint the skin, it's time to do it! It is best to apply paint in gloves and with a sponge.

Important: after processing with water and before applying the paint, at least an hour should pass.

  • When everything dries, you can pull the skin by the cuts - So the shape of the Kashpo will begin to gradually appear.
So you need to put the shape of a suspended leather pot
So you need to put the shape of a suspended leather pot
Making holes for threading ropes for mounting caspoos
Making holes for threading ropes for mounting caspoos
  • Now you need make 4 holes on top. In them it will be necessary to pass the ropes for fastening the pots.
Stepwing and tying nodes on a suspended pot
Stepwing and tying nodes on a suspended pot
This is how a suspended pot of leather is obtained
This is how a suspended pot of leather is obtained

Balcony flower pots for flowers: photo, description

Such a pot is perfect for those people who have a catastrophically small space on the balcony, but I want to place flowers somewhere. It will be necessary to stock up:

  • Pieces of wood - 4 pcs.
  • Carpentry glue
  • Drill

About the creation itself:

  • By using glue need gather together all the bars. A peculiar frame should turn out.
  • Then to one of the crossbars you can Glue the pot.
  • In the upper crossbar, you need to make a hole, through which the Kashpo will be attached to some hook on the balcony. You can hang the product either directly on it, or resort to the help of ropes.
This is the result of a pot for a balcony
This is the result of a pot for a balcony

Purchased pots are often worth a lot of money. So why not make something independent of available materials? Moreover, hand -made things are always unique.

How to make a cashpot for a garden of gravel: video



Author:
Evaluate the article

Add a comment

Your e-mail will not be published. Mandatory fields are marked *