How to make a beautiful rose and a rose bud from corrugated paper with sweets and without sweets with your own hands: step -by -step instructions, a template and the size of the petals, leaves. How to make a bouquet of roses, buds of roses from corrugated paper, a basket with roses?

From this article you will learn how to make roses from corrugated paper.

If you are going to visit, but have not yet chosen a gift, do not despair, you can make it yourself. Such a gift can be a bouquet of roses from corrugated paper. In this article, we will learn how to do them, and also make roses with candy inside.

Phased manufacture of a sprig of rose with corrugated paper leaves: MP, step -by -step instructions, template and size of petals, leaves

To do a branch of rose with corrugated paper leaves You need to prepare the following:

• Corrugated paper red and green
• Scissors
• Dry thin twig
• Scotch
• White threads
• Thin wire

We do corrugated paper:

1. From red corrugated paper we cut out 8-10 rectangles 2*7 cm.
2. We open the rectangles on one side, on the other, we cut a little. This is our rose petals.
3. We stretch each petal in width.
4. Tightly twist one petal. Then we wrap another petal on it, but not so tightly. Then we wind the rest of the petals, the farther from the center, the more freely we wind the petal.
5. Below the petals we wrap with a thread and tie the ends of the thread tightly.
6. From green corrugated paper, cut a rectangle of 4*7 cm.
7. We cut smaller rectangles from the green rectangle, but not to the end, leave 1 cm.
8. The tops of the rectangles are cut a little to make triangles.
9. Triangles are twisted.
10. We wrap the green cups around the flower with twisted triangles up, fasten with tape below.

We do corrugated paper:

1. From corrugated paper of red, we cut rectangles 2*4 cm.
2. We ex lend the rectangle in the middle, twist, fold in half, and turn in the form of a dense bud, fix it from the bottom with threads.
3. We make a green edging for a bud from a rectangle of green corrugated paper 2*4 cm, also twisting green triangles.
4. We wrap the green edging around the red bud, fasten it with tape.

We make a sprig of rose:

1. We wrap a dry branch with a green strip (2*2 cm) from corrugated paper.
2. At the top of the stem, we attach the rose with tape, glue the buds and oblong leaves from corrugated paper below, up to 5 cm long, glued 3 pieces. The rose branch is ready.

How to make a beautiful growth, floor rose from corrugated paper: step -by -step instructions, template and size of petals, leaves

For a large rose from corrugated paper, you need:

• White cardboard
• Corrugated paper red and green
• Thick wire or branch
• Thin wire for fastening leaves
• Thermoplastic glue

We do large rose from corrugated paper:

1. We cut out a template for petals in the form of a drop, a length of 24 cm, width in the widest part of 9 cm from cardboard.
2. The second template for petals in the form of a heart, 24 cm long, 18 cm wide.
3. From red paper we cut out 5 petals in the form of a drop, and 12-14 pieces in the form of a heart.
4. We stretch all the petals in width.
5. We tighten the upper part of the petals onto a stick or pen.
6. For the stem of the future rose, we take a thick wire or a long thin stick, about 1 m long. You can prepare for the manufacture of a rose in advance, if once again, walking in the forest, find a thin even tree branch, and bring home.
7. We wrap the stalk of rose with green corrugated paper, a few thin strips will be enough.
8. We tightly wrap the top of the stem with the first petal in the form of a drop, glue thermoplastic glue (an object glued with such glue is not terrible heating and cooling).
9. We wind the rest of the facial petals onto the stem, but not very tightly, and glue them.
10. We wrap it up on top of the boards-droplets and glue the ceremony petals.
11. From green paper we cut out long thin leaves, up to 10 cm long, and glue them from the bottom of the flower.
12. We cut out the rose leaves from paper and also glue it to the stem.
13. We install the rose in the floor vase or make it a special stand, and install it in the hallway or living room.

Making English rose from corrugated paper: instructions, templates

To make english rose from corrugated paper we need:

• Corrugated paper green and light yellow
• Candy in a piece of paper
• Skewer
• Thermoplastic glue
• Scissors

We do english rose:

1. We cut out of light yellow paper 3 types of rectangles:
   2 pcs. 5*7 cm (for the formation of a bud),
   12 pcs. 3*7 cm (for petals in the middle of the flower),
   5 pieces. 4*7 cm (external rose petals).
2. We round all the rectangles with scissors in the upper part, do not touch the bottom (do not mix rectangles).
3. The petals for the formation of a bud and in the middle of the flower are stretched in width.
4. The petals designed to arrange the appearance of the flower, wind up the upper side on the skewer so that the wavy edge turns out, and stretch a little in width.
5. We take a skewer and candy, wrap them with a large petal, glue the edges of the petal with glue to the spray, then tightly glue the second petal, we got a bud.
6. Then we glue 12 petals, the petals on the skewer are attached.
7. Glue 5 petals on top overlap with curved side up.
8. We cut out of green paper of the bowlness, stretch them in width and twist them at the tips.
9. Glue the cups from the bottom of the rose.
10. We wrap the skewer with a strip of green paper and glue it to the flower.

Video: Master class. Candy stand. English rose

Making a twisted rose from corrugated paper: instructions, templates

For the manufacture of witched rose from corrugated paper we need:

• Corrugated paper pink and green
• Wire
• Scissors

We make it crowned pink made of corrugated paper:

1. Cut the rose paper strip 5-6 cm wide, 60-80 cm long.
2. We twist the upper edge of the paper and bend, but not usually, but as if in waves - and so the whole strip.
3. We turn the strip with a rose, fix it with wire so that it does not unwind.
4. From green paper we cut out a thin long strip, wrap the wire and rose from the lower part.
5. From green paper we cut out the leaves, attach wire to the main stem.
6. There are several such roses and get a bouquet.

Making multi -color rose from corrugated paper: instructions, templates

A multi -color rose of corrugated paper can be made if you take several flowers of paper for the petals, the more interesting the rose will turn out. Here are examples:

How to collect such a rose, see below.

Video: rose from corrugated paper. SL master class

Making a small rose for topiary from corrugated paper: instructions, templates

For manufacturing small roses and topiary need to:

• Corrugated paper pink and burgundy
• Thermoplastic glue
• Sisal (rough fiber resembling moss) burgundy
• Thin wire
• Alabaster
• Flower
• Star for the barrel
• Beads
• The satin tape is pink

We make topiary with roses:

1. From corrugated paper, cut a strip 40 cm long, 5 cm wide.
2. On the one hand, we bend the paper once, and then again, and so throughout the strip, we try to ensure that the bent strip is not even, but in waves.
3. We twist the rose bent at the top from the strip, fix it with wire so that the rose does not spin.
4. We also make the rest of the roses, there are more than 20 of them, you need to make an odd number.
5. We make a ball on which roses will be attached: it can be made from the newspaper by crumpling it, and then wrapped with corrugated paper, and glue it.
6. The wand on which the ball will stay is wrapped in pink paper.
7. We insert the wand into the pot, fill it with alebast solution, let it freeze.
8. Glue the roses to the ball with glue, and attach the ball to the stick.
9. We wrap the pot with burgundy paper, and put the sisal on top and attach several roses to the paper.
10. We wrap the stick with tape, decorate the roses with beads, and the topiary is ready.

Making a rose bud from corrugated paper: instructions, templates

For manufacturing a rose bud from corrugated paper need to:

• Corrugated paper light yellow and green
• Scissors
• Green threads
• Candy in a piece of paper
• Toothpick
• Scotch

We do rosa bud:

1. From paper light yellow, we cut out 2 squares 7*7 cm.
2. In the upper part, round the squares with scissors.
3. We stretch future petals in width.
4. We prepare the candy: we glue the tips of the wrapper with tape together.
5. We twist the petal around the candy, then we take the second petal and wrap the overlap around the candy.
6. Below we insert a toothpick and tie with a thread.
7. We cut out for the bud of the cups in the form of a rectangle 6*7 cm from green paper.
8. On the one hand, on a rectangle, we cut out sharp spiers, without cutting to the end of 2 cm.
9. We stretch the future cups in the lower part in width, and twist the spiers a little.
10. We twist the cups around the bud, fix it with a thread.
11. The leg of the bud of the toothpick is wrapped with green paper. The bud is ready.

Production of roses from corrugated paper with sweets: Instructions, templates

For roses with candy inside need to:

• Corrugated paper green and light yellow
• Candy in a piece of paper
• Wire
• Scotch

We make a rose of corrugated paper with a candy inside:

1. From light yellow paper, cut rectangles of 2 types: 5 pieces 6*7 cm, 6 pieces 4*7 cm.
2. On the one hand, round the rectangles, on the other, cut off a little corners.
3. We stretch the resulting petals along the width over the entire length, leave only the end of the petal, 0.5 cm to the end.
4. From green paper we cut out the cups. To do this, cut out a rectangle of 5*7 cm, from it we cut out not to the end smaller rectangles, cut the tops of the rectangles and twist, stretch the middle.
5. Around the sweets, we will turn out the wide 5 petals, we twist them over the candy so that the rose is closed and the candy does not peek, fix the wire from below.
6. We wrap 5 narrow petals on top, but not tightly, but freely.
7. We wrap the stupor from below, attach tape, and the rose is ready.

Roses from Rafaello and corrugated paper: MP for manufacturing

For the manufacture of rosochk with Rafaello sweets inside, need to:

• Red and green corrugated paper
• Rafaello sweets
• Scissors
• Thermoplastic glue
• Green threads
• Skewers

We make a rose with Rafaello inside:

1. We will make a rose from 14-15 pieces of petals. From red paper we cut out 3 types of rectangles equally: 4*8 cm, 4*7 cm and 4*6 cm.
2. We round all the rectangles on top with scissors, and stretch in the middle.
3. The wrapper of the sweets is tightly pressed to the candy itself, if air gathered inside the package, we make a small hole with a needle, and the air will come out.
4. We wrap the candy in the petal (first we use the shortest petals), wrap with a thread below. So we hug the rest of the petals, first shorter, then - longer, and the longest is the longest on top.
5. When we wrapped half of the petals, we spread the skewer with glue and insert the petals chopped into the middle of wiped thread in the middle, tightly pressed.
6. Now that the rose has a leg, glue the remaining petals to the skewer with glue.
7. We make a cup for a rose: first we cut out a rectangle of green paper 7*8 cm.
8. On a green rectangle, cut out long sharp teeth (almost the entire length, untouched, leave 2 cm).
9. We stretch the continuous green field in width, and twist the teeth a little.
10. We attach the resulting cup to the rose from below and glue it.
11. We wrap the stalk of the flower with a thin strip of green paper and glue it.
12. In the same way we make 4 more roses from white, pink, cream and burgundy corrugated paper.
13. We collect the bouquet, first we wrap in white corrugated paper, and on top of transparent, and give to your beloved people.

Video: "Roses." Bouquet of sweets "Rafaello"

How to make a beautiful red, blue rose from corrugated paper?

Red roses from corrugated paper with sweets inside, according to the principle that we considered above, can be done a lot. You can arrange roses in the form of a heart. To do this, you need a box of sweets in the form of a heart, and we take roses without stems. So that the roses do not scatter, glue them to the box with glue, additionally you can still fasten roses with a tape. It will also go to decorate our composition. This beauty can be presented to a loved one on Valentine's Day.

If you go to visit, and do not know what to give the owners, an unusual bouquet of blue roses from corrugated paper, with sweets inside, will be by the way.

How to make a bouquet of roses from corrugated paper?

We have already learned how to make roses from corrugated paper, now we need to learn how to collect bouquets of roses.

First option. Collect the rose made from corrugated paper and put in a vase. They can be stored for a long time, not like fresh flowers, and they do not need to add water.

The second option. Roses made of corrugated paper with sweets inside, you can wrap it in beautiful paper, and give a loved one.

The third option. Distribute a bouquet of roses from corrugated paper and fix it with glue in a box in the form of a book.

The fourth option. The composition of roses with sweets inside of corrugated paper.

Video: DIY gift. Candy stand

How to make a bouquet of roses from corrugated paper?

For the manufacture of bunchiks of roses made of corrugated paper need to:

• Corrugated paper red and green
• Round sweets with candy wrappers
• Scissors
• Thermoplastic glue
• Green threads
• Long skewers

Make a rose bud with candy inside:

1. Cut 2 rectangles 7*5 cm from red paper.
2. We round the rectangles on the one hand and stretch them in the middle.
3. We wrap the candy tightly in one petal. On top of it we apply a second petal so that it protrudes several millimeters compared to the first, tie the bottom of the bud with a thread.
4. We spread the skewer with glue and insert into the budding bud.
5. Cut the cups from green paper, stretch it, twist the tips and glue it with glue to the bud.
6. We wrap the skewer with a green strip of paper and glue it with glue. One bud is ready.
7. We make several more buds (unpaired number) and the bouquet is ready.

How to make a basket with roses?

For baskets with roses We will need:

• A small basket
• Corrugated paper roses that we will make ourselves
• Styrofoam
• Green corrugated paper
• Green organza (instead you can take a floristic grid or transparent film)
• Satin tape to wrap the handle on the basket

We collect a basket of roses:

1. To get started, we will make roses.
2. Prepare a basket.
3. Consider under the basket so that it is placed in it, foam.
4. Wash the foam with green paper.
5. We arrange roses, and the basket with roses is ready.

Look in more detail how to do everything in the next video.

Video: Master class. Bouquet of sweets. DIY basket with roses

Beautiful roses made of corrugated paper, winter bouquets of corrugated paper with roses: photo

In winter, fresh roses are not available to everyone, but we can make a great gift with our own hands - make roses from corrugated paper.

So, we learned to make roses from corrugated paper, they can be a great gift for a holiday to loved ones.

Video: corrugated paper roses