How to make a beautiful and original needle with your own hands - a donut, a mannequin, a cactus, from disks and 20 more interesting models: ideas, patterns, diagrams, photos

In this topic, we will consider how to make a beautiful needle. And we will also share our inspiration to create new ideas.

Content

A needleman is an indispensable thing of any, without exaggeration, needlewomen. It greatly simplifies the task of measurements, manufacture, and also introduces even some highlight to your creative corner. Moreover, in such a small, but extremely important element, you can also turn on your imagination and create an almost miniature masterpiece. And a novice craftswoman, and even completely not creative people, who want to please their loved ones with an interesting gift, can make a needleman with their own hands.

How easy it is to make an original needle with your own hands: description of the process, photo

In fact, The algorithm is madly simple:

cut 2 squares from absolutely any residues of matter;
we sew them together, leaving only a small hole;
turn out the product after a line. At the same time, in each corner you need to make 1-2 notches and turn out with the tip of a pencil, hook or handle. This is necessary so that the corner is not rounded;
it remains to fill the product with synthetic winterizer;
sew the hole with a manual stitch;
and in conclusion, decorate at your discretion with beads, beads, sequins, ribbons or other small inventory.

Note: such a small homemade pillow can be glued or carefully sewn to the matchbox, in which additional needles can also be stored. An example of this is the beauty below that we got from the 18th century.

Who said that from a matchbox you can’t make a needle? — Who said that from the matchbox you can’t make a needle?

But still I want to create an original thing that will not only function, but also delight each time eye. Therefore, we propose to consider several interesting ideas.

How to make a round needle?

To make a round needle, the first thing is necessary Prepare the base, So the product will be persistent and will not lose needles. To do this, we take any cardboard, preferably not school, but from under any box unnecessary in the house. Corrugated cardboard is more dense and durable.
Cut the circle of the desired diameter. The optimal size is 10-15 cm.

Cut the fabric 2-3 cm larger than the base itself. Now we pass the fabric circle The usual seam “forward needle”. That is, on one and on the other hand we pass the same stitches. We do not tighten the thread much and do not cut! Pulled a little by the ends - They pulled the circle to the desired diameter of a spherical shape.
But we do not tighten it strongly, at this stage we begin to fill the future pillow with a synthetic winterizer.

Close with a cardboard bottom, tighten a little more thread and fasten it with a knot. We pass the stitches (you can with the same thread) and additionally glue the fabric to the cardboard.

By the way, you can decorate at your discretion. And even such a creation can turn into a simply luxurious element. For example, do not forget to make embroidery with thread, beads or muline. By the way, this must be done before the stage of cutting the circle. This is much easier to work.

We make a needle up the type of "flower" or "pumpkin"

In principle, the technology is not very different - Cut 2 circles From a fabric with a diameter of 13 cm. In this case, the cardboard bottom is excluded.
We leave the hole to turn out the product. We stuff with a synthetic winterizer and a manual stitch we sew a hole.
Now in the center of the circle we stretch a large needle and begin with a strong thread Form the petals that pull the pillow. You can decorate at your discretion. But in the center we sew a button on the leg so that the nodules are not visible.

An example of the fact that from a simple needle you can create a real creation of a modern era.

How to make a needle on hand: bracelet

After you have made the easiest version of the needle (just round or pumpkin), you need to make only the bracelet on hand. The algorithm is as follows:

they measured the wrist, added 2 cm for fasteners and 1 cm at the edges for seams;
you make width at your discretion. The optimal value is 3-4 cm (plus 1 cm per seams on both sides);
we stood the rectangles around the perimeter from three sides. Turned out, walked around the entire perimeter finishing line;
for our own convenience we make a bracelet Velcro. We stood the fastener on the right sides. It plays a role here, how you will wear it - Implement or just assembly. In the latter version, it will be necessary to make a little longer the straps themselves;
they put on glue, sewed with hand stitches or even used Velcro to attach the needle to the strap itself.

Idea: you can use any old bracelets or just wooden ice cream sticks. They must be filled with hot water, and when they become soft, put in a glass. After drying you will get the basis for the bracelet.

A very simple way to make a needle on hand:

we need a plastic lid of large diameter. We make cuts in it, as shown in the photo;
we insert the elastic band, twist the seam into the lid. We fix it with glue;
we fasten the needle and sealed the side of the lid for aesthetic purposes.

Three actions - and a comfortable needle is ready!

We continue the topic - a needle on a finger

It is necessary to make a triangle from a square 10 to 10. But pay attention - We do not insure the corners!
We turn it out, stuff with a synthetic winterizer and now we insert the corner one to one, sew up with a manual stitch.

We make a needle "Boofik"

If you prefer bright colors, then this little thing is exactly for you. Take it 8 different shreds of the same size 5 by 15 cm. It will also require squares of fabric size 10 by 10 cm.
We sew these shreds together, passing by a line about 0.5 cm from the cut. Necessarily We iron the seams So that they do not spoil the appearance.
We connect them in a circle by line. Further with the hands of ordinary stitches, we pass from above and below the canvas. We pull our foundation a little And we stuff with synthetic winterizer.
Cut circles with a diameter of 10 cm from stationery cardboard. We pay attention to the photo, as it is necessary Wrap corners.
We fasten with pins and pass the base with a manual stitch with the bottom of the navigation. You can decorate at your discretion. But this option in itself looks funny.

A needle with a jar

It is done according to the same principle as the needle of the bracelet. That is, cut a circle, tighten it and stuff it with a synthetic winterizer. It is more convenient to take a jar from under baby food. Wash it well from the label. Glue a needle pillow on the lid and decorate at your discretion.

Needle with a can of storage small things — A needle with a jar for storing small things

But you can do this with the old Komarik.

How to make a “hat” needle?

This model also uses as a basis The above algorithms. The only recommendation is that for the bottom of the hat, take a dense cardboard or the same old disk. But the upper part will not prevent the upper part of the ordinary plastic jar from under the yogurt. Of course, it should be round and do not forget to cut off the bottom.

How to make a needle from disks?

No less simple, but interesting option. There are discs in almost every house - take 2 pcs.
We also cut out circles of 2.5-3 cm larger than discs from fabric.
Glue in this case will not help. Therefore, we make such darn stitches so that the canvas itself holds on the disk.
In the second case, first embroider flowers (or use another decor), decorate them. We insert a synthetic winterizer between the disk and fabric, sew it, as in the first version.
It remains only to combine two sheathed disks among themselves and close the seam with a cord or ribbon.

How to make a "Donut" needle?

Of course, it can be made of any material, but it is precisely From felt This needle will look very realistic!
We take the disk and cut through it an external and internal circle in 3 details (2 for the base and 1 for glaze).
We make a pink glaze with a slightly large inner neckline and rounded edges.
Fatherless seam We walked through all the details. Although the felt does not spray, it will look so much more attractive.
We pass in multi -colored threads wide stitches According to a pink felt, creating chips.
Connecting seam We pass between the stitches to sweep the details with each other.
Fill with synthetic winterizer and close the completely circle!

How to make a cactus needle?

We offer you a scheme on how to make a needle in the form of a cactus. Of course, the felt models look most interesting.

How to make a "mannequin" needle: patterns, photos, description of the work

The biggest problem is a stand. It should be stable! Can be used Coil from threads,but only wooden. Or even Metal lids for conservation, furniture handles with a thin diameter of the hole.In the latter case, then you should use the rod with the corresponding diameter, but you can take for the axis Pencil, Chinese stick or knitting needle.

As an option - use a candlestick. But take into account the size of the future mannequin and the stand itself. Their length should be approximately the same - then the needlewoman will stand and look harmoniously.

We proceed to the pattern of our mannequin.

Note: To make the mannequin aesthetic look better, make it a base. Cut out of dense cardboard the corresponding to the bottom of the oval and tighten it with a cloth. After sew with manual stitches to the mannequin. And do not forget to pre -make a hole in the cardboard according to the size of the axis.

We cut the material by the pattern, leaving allowances for the seams.You need to sew very carefully. First connect all the side seams, then sew the bottom. The product is turned through the neck. You stuff with synthetic winterizer, but not to the end - before the final stitching, you will correct the density.

We spread our axis through the hole below. You can also fix the neck with a cardboard cut, cut a pipe from a skein of threads (if it is made of paper). Another idea - use a thimble, which is covered with fabric. It costs inexpensively, but will significantly ennoble the silhouette itself. But take into account the size of your mannequin.
Be sure to tut up the fabric! The simplest way is to pull the neck with a thread. But in this case, it will need to be closed with a ribbon or any decor elements.
You can decorate at your discretion - for example, tighten with beads, ribbons, feathers or make a hat, skirt, etc. You can even make an outfit. By the way, If you made a large enough needle, then you can show customers your work in a miniature version.

Important: so that the mannequin does not slide along the axis, wrap the thread or segment from the fabric on the stick (rod or spoke) in the chest and hips! And be sure to smear with glue!