An integral accessory during the celebration of Victory Day is the St. George ribbon. Regardless of age, status and political conviction, every sane person seeks to express his love and gratitude to the Motherland, decorating his image with a symbol of victory.
Content
- How to do it correctly and beautifully arrange a St. George ribbon with your own hands: photo
- Georgievskaya ribbon with a tricolor with your own hands
- DIY Georgievskaya ribbon for kindergarten
- DIY Georgievskaya ribbon
- Georgievskaya ribbon with your own hands from ribbons
- Beautiful St. George ribbon with your own hands from beads
- Video: Knitting with beads. Master class "St. George Ribbon"
- Original Georgian ribbon with your own hands
- Video: Kanzashi Rose by May 9
- How to make a St. George ribbon with your own hands from paper?
- How to make a St. George ribbon Kanzashi with your own hands?
- Video: Kanzashi clove. Brooch for May 9
How to do it correctly and beautifully arrange a St. George ribbon with your own hands: photo
Georgievskaya ribbon with a tricolor with your own hands
For work you will need:
- blue, red and white tones
- matches
- glue
- scissors
- tweezers
- pin
- for decorating brooches - accessories
We cut three squares from the tape of each color
We turn the square diagonally to make a triangle.
We bend in half.
Clound with tweezers, for the third time a folded triangle. We process the edges with a flame. Then we follow the bottom of the tips glue.
The first petal is ready.
Thus we make subsequent blanks. Three pieces of each color.
We remove the uneven edges with scissors.
We form the first twig of a tricolor. We attach the petals to each other, using glue, so that each subsequent is slightly above the previous one.
Between the first and second white petal we fix the blue.
Then we glue between the second and the third.
And the third is to the center.
In the same sequence, we glue red petals between blue.
The first branch is formed.
Duplicate in full -time manufacturing the second twig.
- We take out the St. George ribbon. Put it in a loop. In the center we fix it with glue
- At the back, we attach a small pin
- On both sides of the tapes, we glue the resulting blanks
- Add additionally made red tape petals to the center. From which we form a flower
The St. George ribbon with a tricolor flower is ready!
DIY Georgievskaya ribbon for kindergarten
Children will be very interesting to do with their own hands not a difficult fake for the holiday of Victory.
- Prepare clean sheets of white, black and orange paper
- On a white sheet, measure the strips with a width of 1 cm
- Black and orange sheets are poured with stripes of the same width
- Depending on the age of the children: either we give scissors and they cut out on their own, or the teacher cuts out the strips from orange and black paper
- On the drawn strips on white paper, glue alternately cut strips, alternating colors
DIY Georgievskaya ribbon
A knitted tape is very original.
- We take cotton coil threads
- We collect a number of air loops, brown in color along the selected length of the tape
- We start each row with three air loops up
- We make 6-9 rows with columns without crochet or floor with columns
- Then we knit 6-9 rows with orange thread
- Then again the brown strip, orange
- We finish brown
- When changing colors, we do not break the thread, stretch along the edge
- If desired, you can tie the edges
A spectacular tape that is far from distinguished from the factory
Georgievskaya ribbon with your own hands from ribbons
- We take a satin brown or orange tape
- We cut out the identical two strips from cardboard. The width is larger than the tape
- On cardboard stencils we make slots with a knife, along the width of the desired strip
- Put the tape between the stencils. We keep it so that it does not move
- Applied paint from a spray can for brown tape with orange color. If the tape is orange, then the paint is brown
- In the same way the paint on the other side
Beautiful St. George ribbon with your own hands from beads
For work you will need:
- an arbitrary amount of beads, but not less than 40 grams, brown and orange color
- orange iris threads
- brown cuttex threads;
- hook No. 1-1.2;
- wire for beadwork.
Knitting:
- We start knitting along the selected length
- In the 1st row: we tie the recruited chain of air hinges with connecting loops.
- From the next row, we knit with beads with a crochet, alternately - strips of black and orange color.
- We seal the edge of the tape with columns without crocheted, orange thread with beads, adding a beading wire. Thus, we avoid turning the ribbons during operation
- We pass around the tape by closing orange loops
The ideal option for decoration, as for clothes and a handbag
Video: Knitting with beads. Master class "St. George Ribbon"
Original Georgian ribbon with your own hands
Prepares materials and tools:
- St. George Ribbon
- Black and orange -colored satin ribbons
- Tweezers
- Scissors
- Glue
- Pin
- Matches or lighter
We proceed:
- We cut seven black and fourteen squares from a satin tape five centimeters
- We cauterize the flame of the edging
- With tweezers we fold the square in a triangle, which turns again.
- To get the petal, bend the triangle again
- We cut off the irregularities
- We process the edges with a flame
- Cut the resulting excess tail
- The passage of the flame is cut off
- The black square is folded twice diagonally
- Puts on the orange tape
- We get three petals in which black in the center, orange at the edges
- The excess angles of the petal are cut off
- Cut with a flame for processing and connecting the ends
- We make seven three -layer petals
- Connected blanks in the form of a spike
- In the center we attach black or white beads in a row
- We fold the guards tape in the form of a loop
- Fixes with glue
- Glue the resulting spikelet on top
- We fix the brooch with a pin
Video: Kanzashi Rose by May 9
How to make a St. George ribbon with your own hands from paper?
A very fast and simple way
We purchase quilling paper:
- Black and orange 5 mm wide
- Orange 1.5 mm wide
1 method
- We take A4 paper format
- Glue
- We glue it starting from the center of the sheet, alternately: orange - 1.5 mm, black - 5 mm, orange - 5 mm, black - 5mm, orange - 5 mm, black - 5 mm, orange - 1.5 mm
- In this way we stick the required amount of finished products
- Cut the resulting ribbons
2 method
- We take a wide tape
- We fix it to the surface with a sticky side up
- We hang down the tape from the surface
- Glue pre -prepared strips in the same sequence as in the first method
- Cut off
- Lays on the table, ironing the surface by removing all the irregularities
3 option
- We take orange bilateral paper
- We draw black stripes in Word
- We print
- Cut
How to make a St. George ribbon Kanzashi with your own hands?
The necessary materials and tools:
- 60 cm of tape
- a little bead or rhinest
- bulad for fasteners
- centimeter
- scissors and tweezers
- lighter
- pistol-clock
Cut the squares of 7 cm long.
Pincet fold the square, as in the photo
We fold again.
We turn the resulting element into the inside.
We bend the lower edge up. We process fire.
We get a petal: the view from the front side and from the wrong side.
We make five such blanks.
We take 20 cm tape. The edges are processed with fire so that they do not sprinkle. The ends can be arranged in the form of a flag
We fold the tape, as in the photo. We fix it with glue.
On the left side we attach a pin with a needle with a needle.
Glue the prepared petals in the form of a flower. Color with rhinestones or beads.
Even a small child can make a ribbon at home.
If you want some special option-a younger effort, and your tape will be the only copy.