How to make numbers from several balloons for a birthday, anniversary, a holiday for decorating the hall: step -by -step instructions, photos

In this article, we will consider instructions for creating numbers from balloons.

I would like to celebrate my birthday brightly, with a lot of positive emotions. A beautiful decoration for the holiday will be a figure that shows the age of the birthday. How to make such a figure at home and talk in the article.

How to make a number 1 of several balloons: step -by -step instructions, description, photo

In order to make a frameless unit for a birthday or on another holiday from the balls will need:

• Inflatable round balls of 5 inches, 67 pcs. one color and 9 the other. You can choose a combination yourself. The most popular combinations of colors are gold and white, gray and pink, gray and blue. You can make a monophonic one at your discretion.
• For fastening, you need a fishing fishing line, it is better to use thin, in order to make it convenient to fix
• Calibrator. This device is made of cardboard, using a circul or a cup, draw a circle of the desired size, cut with scissors or a special stationery knife, according to which you can measure the diameter of the balls when inflating. This is done so that all the balls are the same size.

Next, it is necessary to perform actions according to the following instructions:

1. Inflate balls and measure them using a calibrator.
2. Tie two balls. Then combine 4. Thus, the segments from which a unit consists of.
3. From 7 pcs. Such segments can be made by the base of the number. Of which, 4 segments are monophonic, and 3 “four” consist of three balls of the same color and 1 another. The balls must be attached using fishing line, each “four” should be tightly connected to the previous one. Thus, out of 28 balls, you get the base (bottom of the unit).
4. The vertical part is prepared from 10 segments, 5 of which are plain. Through the center of the base, you need to penetrate the fishing line and already “string” the vertical part on it on the same principle as the basis of the number.
5. Make a "tail". It consists of 2 segments, 1 of them 3+1 of a different color, and it should be attached first to inclination. The figure is ready!

How to make a number 2 of several balloons: step -by -step instructions, description, photo

In order to make a really beautiful number 2 for a holiday or birthday, it is better to use the frame that can be made of wire, especially for large numbers.

Today it is fashionable to make jewelry from balls of different sizes, but it is more suitable for arches and figures, but the “deuce” will look very beautiful and accurately if the balls are one size. Therefore, it is better to monitor this or use the calibrator, as in the case of a “unit”.

• For a deuce, you need 112 balls, and a figure is made of a figure and a straight line.
• For the figure, you will need 19 segments, and for a straight line - 9.
• Before stringing the vertical part, you need to leave the “tail” of the fishing line in order to be conveniently attached to the base of the number.
• Initially, it is necessary to make the vertical part even, and then give a curved shape and fix it.

Of course, without reason it will be difficult to correctly bend the figure part, but if you are confident in your abilities, then you should try. It is necessary to fix the number “two” as well as a unit, using a fishing line. But because There is a curved part, then it is worth fixing with a fishing line in several revolutions.

How to make a number 3 of several balloons: step -by -step instructions, description, photo

You can make the figure “3” for the birthday of your child yourself by spending a little time and effort on it. Despite the fact that this seems impossible, it is quite possible to make a figure with your own hands.

• For a large number, you will need 106 balls. You can take half of the white balls, half - a different color, for example, pink, or blue if you do 3 for a boy.
• The three of the two parts consists of the lower and upper. And they make it just like the previous numbers, folding it from the “four” segments.
• The upper part consists of 13 “fours”, before string the balls, you need to leave a long tail of the fishing line, this is necessary in order to easily attach the lower part in the future.
• In the same way, to make the lower part of 13 segments. And now, you need to give the balls the shape of the three, and fix it using a fishing line.

Thus, you will get a flat beautiful, frameless figure.

How to make a number 4 of several balloons: step -by -step instructions, description, photo

The number 4 is also easy to do, like everyone else, and due to the fact that it is straight, that is, it does not have curved structures, it is easy to make it without a frame. And you will need 108 5-inch balls of any color or flowers, at your discretion. The size of the balls should be the same, and it can be measured using a calibrator, it is better to inflate using a special pump, it will be more convenient.

• The main parts are the “four” that is, 4 balls are interconnected, first you need to inflate and connect 2, and then more 2. You need to fix the segments among themselves using a fishing line.
• The vertical part consists of 15 "four". The short vertical part consists of 9 segments, and a short horizontal of only 3.
• First, you need to make most, then start a small vertical part to first leave the tail of the fishing line. It is also a small part, leaving a long segment of the fishing line in order to attach the structure to the main part.

Unscarled 4 is ready. Of course, the process of making numbers from balls is quite painstaking, and takes a lot of time, but such an activity is very interesting, and the crafts with your own hands can become a favorite hobby and even bring money.

How to make a number 5 of several balloons: step -by -step instructions, description, photo

The number five of balloons can be made independently for any holiday, corporate party or birthday. You can make a figure both with a frame and without it. Of course, the frameless design requires accuracy and dexterity, so if you are uncertain in your abilities, it is better to string balls on the frame that can be made from wire.

But if you decide to make a frameless 5-ku, then you will need:

• Chancellery scissors
• Wire 0.7 mm
• Calibrator
• Balls 5 inch 92 pcs.

First, we make the “four”, connecting the two “deuces” while changing them in places.

• To start the number 5 is from the lower semicircular part, which in turn consists of 15 four.
• The vertical part consists of 4 segments. Before stringing the balls on the fishing line, you need to leave part of the fishing line for subsequent fastening to the semicircular part.
• The horizontal flat part is made of 4 segments.
• Give the largest part a curved shape, and then connect all the details of the structure.

In fact, the number on the frame is made in the same way, and the number of balls is the same.

How to make a number 6 or 9 of several balloons: step -by -step instructions, description, photo

At first glance, the number 6 or 9 of balloons is very complicated, but in fact it can be made easily and even faster than the rest of the numbers. Like the previous numbers, the “six” consists of segments that consist of 4 balls. The number 6 or 9 of multi -colored balls of the same size looks very beautiful.

• You can control the size using a special template, which can be made independently by cutting the diameter of the size you need from cardboard.
• You will get a large and beautiful dial of 112 balls of 5 inch. From this amount you will get 28 segments that need to be strung on the fishing line, after leaving a small segment of the fishing line for fasteners. The balls must be tightly attached to one another.
• Next, you just need to give the necessary shape of the resulting design. You need to fix in several places for reliability.

The number 6 or 9 is ready.

How to make a number 7 of several balloons: step -by -step instructions, description, photo

On the seven years of your baby, you can decorate the hall yourself and not hire a separate decorator, if you have a desire and time, of course. Such a lesson does not require special skills, the main thing is to be patient and correctly calculate the combination of flowers and the number of balls.

• The seven can be made of 88 multi -colored balls, or any color at your discretion. The main basic element is the element is the same as all previous numbers - this is the “four”. Fix all the elements with each other tightly and with the help of a regular fishing fishing line, it is better to make several revolutions of the fishing line so that the design is held tight and reliably.
• After you inflated all the balls and distributed along the segments, you can start assembling the structure. First, you need to make a horizontal part, which consists of 9 main segments, first leave the tail from the fishing line.
• Next, you need to make a vertical part, for which 13 "Four" will be needed. Give the base of the desired shape and fix in two places.

• Combine two parts of the digits, you can attach the handles using two long balls that need to be inflated, interconnected and attached to the main part, and give the desired shape. Fix with a fishing line.

How to make a number 8 of several balloons: step -by -step instructions, description, photo

The number 8 of the balls is often made not only for birthdays, but also on the whole International Women's Day on March 8. Often use inflatable balls and similar designs for various corporate parties and celebrations, birthdays, etc.

• For the manufacture of such a jewelry, you will need 144 balls, for example, red. All balls should be the same, and to make it possible, you can measure the diameter using the template.
• The first one needs to make the lower part, it consists of 22 “fours”, for this you will need 88 balls. It is necessary to string on the fishing line all the necessary segments, leaving a long tail of the fishing line and connect in a circle.
• Next, you need to make the lower part of the 14 “fours”. Also leave the tails from the fishing line on both sides of the garland. Do not connect in a circle, but attach to the base so that the figure is eight.

If you are preparing the jewelry for March 8, then you can also decorate with balls of balls. To do this, connect 4 balls of the same color and 1 attach in the center. These flowers are attached to the number, and the leaves can be made of ordinary green long inflatable balls.

How to make a number 0 of several balloons: step -by -step instructions, description, photo

If you need to make a number for the holiday, one of the most common materials that are used for decoration are balloons. Of course, with the help of balls, you can make a variety of designs and jewelry, which are great for any celebration.

The number 0 is not used separately, but only paired with other numbers, but in order to make it you need 128 balls of the color that you need, multi -colored balls look great.

• For work, you will need a pump, scissors, fishing line and a template for measuring the diameter of each ball.
• First you need to inflate the balls, they must correspond to the size of the template. Next, from inflated balls, make the main details-segments that consist of 4-five-inch balls.
• All these “four” must be tightly attached with the help of fishing line, and be sure to leave a long tail from the fishing line so that after all the balls are strung on the fishing line, they can be connected in one circle.

But the number 0 has a more elongated shape, so you need to give the circle the appropriate shape, and fix in two places using a fishing line.

How to make a number 10, 20, 25, 30, 35, 45, 50, 55, 60 of several balloons: description, photo

Any holiday and celebration should bring joy and pleasure, but preparation for any celebration is also a very exciting and interesting activity. Products from balls, numbers or arch, you can easily make it yourself.

• Two -digit numbers are made in the same way as individual numbers, but initially you need to make one digit, then another and, if necessary, connect the numbers using fishing line in two places, for the reliability and strength of the structure.
• You can make numbers with a frame, especially if they are very large, but if you are confident in your abilities and dexterity, you can safely attach a structure without a frame.
• In order for your numbers to be even more beautiful and neat, at the end and at the beginning the numbers are not used for 4, but 5 balls.

If you have already completed the work, but something is protruding or incorrectly located at the finished number, you can use double-sided tape so as not to redo everything completely.

Despite the fact that such work is not the easiest and requires certain costs and time, it is a very exciting hobby, moreover, the decorator services are not the cheapest. Thus, you will not only get a lot of pleasure from the preparation process, but also save on services.

Video: number 1 from balloons