How to cut your bangs on your own beautifully, torn, straight, semicircle, on two sides?

How to cut your bangs yourself?

If you want to quickly and dramatically change something in appearance-trim the bangs!

Fashionable, correctly trimmed or long, bangs can change the image beyond recognition.

Do not girls want to hide the flaws and emphasize the advantages as effectively as possible, without resorting to expensive procedures or make-up?

In the hairdresser, professionals do us a hairstyle, but is it possible to cut a bang on their own? This will be our article.

How to highlight the bangs correctly?

A hairstyle is not only a fresh haircut, but also a trimmed bang on time. This small haircut detail is an important accent of the entire female appearance.

You need to cut the bangs, adhering to some rules. If they ignore them, then not only the hairstyle in general will suffer, but some of the appearance of appearance will also become more noticeable.

• The shape of the bangs is selected taking into account the characteristics of the face and figure. Personal preferences are also important, but they take into account last.
• Do not worry about the fact that there are very few options that emphasize the advantages and features of appearance. There are so many women in the world, and they all find “their” bangs.
• If your hairdresser offers the ideal bang form for you, then in a month it will take its adjustment.
• If you do not have time to regularly turn to the master for help, or at some point you did not have enough funds for a mandatory trip to the hairdresser, then it’s nice to learn how to correct the overgrown bangs on your own. After all, this will be a significant savings and money and time.

Recommendations to those who are armed with scissors and are ready to cut the bangs on their own:

• A long bang, which was equal to the rest of the mass of hair, is more difficult to correct it on its own. It is much easier to correct the younger bangs.
• The final result will depend on the scissors. Buy professional. If you do not plan to correct the bangs at home in the future, you can use ordinary scissors. Only they should be sharp and large. The scissors that cut the paper are not suitable for this.
• Professional hairdressers pre -moisten their hair and only after that proceed to the haircut. But if you first take the haircut, even a small details of the hairstyle, then it is better to skip the stage of wetting the hair and cut only washed and dried hair. Otherwise, you will not guess the length, and your bangs will be too short.
• If you want to cut wet hair, then you should leave the length more than the alleged, and with curling cutting - to deviate a little down from the desired level.

Stages of execution:

• If you have never cut your bangs before, then This item is required to read! Cut off the hair with a margin of length. So we can correct errors in which case or adjust the shape of the bangs.
• You can start haircuts of bangs only in a calm state. Good daylight, mirror and the most sharp scissors that are available in the house are also required.
• The strands from which we plan to make a bang are separated from the rest of the hair. To do this, use clamps, and if the hair is long, then collect in a tail or bundle. Without doing this, you risk accidentally cutting off an extra curl.

• Then we divide the bangs into parts and carefully comb, using a comb with often and far -set teeth.
• We take a small curl of part of the hair secured to the bangs. We clamp it between the fingers, pulling the curl forward. Cut the strip of hair a little, outlining the desired length. We have scissors at an angle of 45 degrees.

• If you direct the scissors at an angle of 90 degrees to the strands, then you will get an arched bang: the strands will glide along the blades of the scissors, which means that a flat bang will not work.
• We repeat all the stages of cutting hair with the remaining strands, removing the excess length.

• Now let's proceed to the formation of bangs. Let's go through it with a comb and cut off the hairs that managed to break out of the total mass. At this stage, you can straighten the shape of the bangs, and cut the hairs that are broken or different in length.

• We adjust the shape of the bangs: we will go through it with scissors located at right angles.

• Moisturized bangs and comb it. Press your forehead with your hand and check if it is carefully trimmed and whether some strands are required to correct. You should not be particularly carried away: you can stay with too short bangs.

• We dry the bangs with a hairdryer and, if there are special scissors, we profile it by walking along the edge. The “cloves” in such scissors are different in size and are located at different distance, which allows you to cut more or less ends. Thus, we will give the bang lightness, and further styling will not take much time.

• If you are confident in your abilities, have minimal experience in the haircut of the bangs, then try to divide the strands into two horizontal layers. Cut the upper one longer than 1 mm below. The bangs will be more neat, and the laying process will be simplified.

How to cut a bang on the side yourself?

To trim the bangs a few weeks after the next trip to the hairdresser is easier than to give the bangs a completely different form on your own.

If you do not have a desire to run to the hairdresser every time and ask only to trim the bangs, then learn to do it yourself.

The most common and popular is a bang on the side: Stages of haircuts

• We outline which side we will comb the bangs in the future, and how long it will be.
• We cut the hair obliquely, holding the scissors at an angle of 45 degrees, gently moving along the entire length and cut it a little.
• We start from the eyebrow, in which the bangs will begin, and then go to another eyebrow. In this case, the movements should be small, as if "plucking." We cut out with filtering scissors.
• We cut on the same principle how any other bangs are cut. The difference is only in the length and in the methods of further styling. It is better to leave for the first time a little length in reserve. Then it will be possible to walk at the ends of the hair again and achieve a flat line.
• A thick bang must be profiled, holding specially designed scissors vertically. Lay such a bang, slightly lifting and stretching with a round brush from the roots.
• What hairstyle is suitable for such a bang? Of course, laid on the side. With the help of bangs on the side, you can adjust the shape of the face and give it expressiveness.
• The bangs on the side look stylish and a little bold. She goes to almost everyone: both young girls and older ladies. In the latter case, the bangs on the side can even visually rejuvenate.

Try! Perhaps this is exactly what a bang will suit you.

How to cut the bangs myself?

1. My head and dry the hair a little with a towel. This is enough for the strands to be quite moist.

2. Determine the direction and length of the bangs. Remember that wet hair is heavier than dry. When the bang dries, it “jumps” up. In order not to be upset and not to renounce “never to pick up scissors again,” we leave a centimeter of length in stock. If you cut the hair with dry, then the result can be seen immediately, without waiting for the bang to dry.

3. Separate the bangs with clamps from the rest of the hair. Switch along the oblique at the angle that you have outlined in advance. The ends of the hair are directed strictly down, and the scissors at an angle to the strand of hair.

4. In order to get the effect of a scythe bangs with torn tips, you will need to cut off the strands at an angle of 45 degrees, deepening 1 cm. At the same time, the scissors are located vertically, and the cuts are made diagonally.

5. Spend the bangs to give splendor: take a strand with a thickness of 1 cm, and hold it at a right angle in front of the eyes. Two fingers take the tip and cut the tail formed in this way. We repeat the same procedure with all the locks.

6. Find the bangs. For thin and obedient hair, light filtering will be enough, otherwise you can completely cut the tips. For hard and thick hair, you will need deep filtering. We do not filter the curly hair. Otherwise, they will begin to curl even more intensively.

We summarize:

• the main cut is made along the inclined line
• we finally draw up and thin out the ends, separating the hair with strands with a thickness of not more than 1 cm

How to cut your bangs in a semicircle yourself, an arch evenly?

If you have mastered the classic methods of haircuts of bangs and have been trained enough, then it will not be difficult for you to perform options more complicated.

• For the formation of the bangs in a semicircle, it is worth considering that only a dense bang with a semicircle will look beautiful.
  We divide the bangs into two halves.
• We cut the first part, which starts from the crown, setting the length of the future bangs.
• The rest of the hair is also divided into two parts. Swear in a semicircle. The scissors are directed from the middle of the bangs to the edges.
• We equal the length on both sides.

How to cut a long bang yourself?

A long bangs are suitable for owners of a round face, because the face will framed on both sides and visually do it already.

• We separate the hair (dry, because wet curls stretch, and it will be very difficult to cut the desired length), which are necessary for the formation of a long bang, from the rest of the hair with clamps. At the same time, the parting must try to make it even. Therefore, we use a special comb for haircuts.
• As in the previous versions, divide the hair into two parts, each of which will fall on one side of the face. It is important to determine the length of the bangs. If you cut a long bang for the first time, then stop at the length to the chin or to the tip of the nose.
• Attach the comb to one of the sides and stretch it along the strand. With the index and middle fingers, press the strand and cut it across the length of the hair.
• We repeat the procedure for cutting the strands with another part of the hair.
• We trim the length of both parts.
• Again, we will stretch the comb down the strands, directing to the middle of the face. If some hairs peek out from under the comb, then cut them. To do this, click between two fingers, and cut off the resulting "tail".

Video: How to cut and lay a long bang?

How to cut a straight bang exactly yourself?

We perform a straight bang in several stages.

• Separate the bangs from the top of the head.
• Divide into two parts. The first part is below the century and starts from the crown. We cut it in the first place. This is necessary to adjust the length of the rest of the bangs. The remaining part of the hair is the first in the first.

How to cut a torn bang yourself?

A torn bang is a great way to refresh the image. But such a bang is not recommended to owners of a narrow face and highly distinguished cheekbones.

If you have no experience, then it is better to finish the torn bangs well. To do this, cut your hair, starting in front and moving to the crown. The allowed misses will be easier to fix.

Stages of haircuts:

• Swear washed, dried and carefully combed hair. Divide them into two parts: bangs and the rest of the hair, which we separate with clamps. The width of the bangs should be equal to the width of the forehead. Density -1-3 cm.
• Once again, we comb the bangs well and begin to cut to the desired length. Cut the entire bangs evenly. After that, let's start cutting some strands obliquely.
• It remains to divide the bangs into strands, the approximate width of which is 1 cm. Place the strand between the two fingers. Raise the bangs and cut off the sticking hairs using a straight cut.
• Find the bangs, cutting it either with small cloves or the entire surface of the scissors blade.

You can find out how to cut a torn bang about how to cut a torn bang by watching a video.

Video: How to cut a torn bang yourself?

Bangs on two sides: how to cut

It’s not difficult to cut the bangs on two sides, and the errors when cutting are practically not visible.

• We separate the bangs from the rest of the hair: we divide the hair with a parting in the center, stretching it from the top of the head to the forehead.
• The bangs will begin about the middle of the parting. Here and put a comb, spending it to the ear. We formed two identical parts of the future bangs.
• We cut off both parts symmetrically. In this case, the length should be to the line of the corners of the lips.
• We “pull” the locks: clamp it with your fingers at an angle to make the edge like a brush. Cut the strands. This technique will help to achieve the effect of naturalness. Some strands can leave the original length.

Video: How to cut a bang?