How to lightly light a car from another car or battery? How to connect the wires correctly to light a car: a scheme. Is it possible to light a diesel car?

We light a car from a starting and row device, from another machine. Detailed instructions.

Content

The situations on the roads arise different, and there is a life ready for each of them. Even if your car is in perfect order, the road may need help to another driver. In this article, we will tell you everything about cigaretting the car, as well as complement the schemes for the maximum detailed disclosure of the issue.

Most people, if they find a completely stitched battery, prefer not to take risks and call the emergency service, or ask the fellow travelers to take the car to tow. Indeed, there are some subtleties, not taking into account which can be more harmful than solving the problem. In addition, many are afraid of whether it is possible to give a light from their car at all, or then there is a risk and to stall itself.

How to give it right to light another car?

One of the most important points - before starting the lighting process, be sure to drown out the engine. In case of failure to fulfill so many simple rule, you risk so many: failure of the car generator and/or relay.

Now it is necessary in a car that will be cooked (which is discharged by the battery) to disconnect the minus terminal from the battery and after it is disconnected to turn off the plus.

Now carefully connect the wires, incorrect connection - you risk making a short circuit. In order for everything to go according to the plan to start disconnect the minus wires, and only then begin to connect the wires. If you do everything in order, then be afraid that the planted battery will discharge the charged battery-donor should not. For those who are afraid to get confused, the golden rule works - the minus terminals are removed, then the plus.

Now go to the connection. We take the “+” terminal and attach to the donor. The second terminal "+" to the second car. Now we take “-” from the donor and connect to the second car (to the engine). It is important to remember that “-” the donor attached to the discharged battery will instantly defuse another battery. So, we connect the “-” terminal to the engine, but as far from moving parts and even more so the heat pipeline. In the process of connection in most cases, sparking occurs.

It is necessary to light up until the moment the engine does not start. After that, immediately rearrange for average speeds, let the engine work for 15 minutes and turn off. Then turn off the wires. Now it remains to return the “mass” wire and move on the road.

Video: How to light a car from another car?

How to connect wires correctly to light a car: scheme

For a more accurate description of the process, we give a scheme of lighting a car from a donor car.

How to light a car with automatic transmission?

Among the motorists, it is common that it is categorically impossible to light with automatic transmission, but what to light, you can not tow a car at a speed of more than 10 km/h. But here completely different components are touched. Remember that the automatic transmission to the generator does not apply to the battery, and you can start the car through the cigarette lighter.

How to lightly light an injector car, cargo?

If you have an injector car with more complex electronic maintenance of the battery, therefore, not disconnected from the power system, as this is fraught with breakdown or a failure of electrical equipment (“brain”).

To recharge the injector car, to begin with, it is necessary to recharge the battery. It is easy to do this, but you need to carefully watch what you are doing. So, we take and connect in turn “+” and behind them “-“:

We take “+” starting wires with red handles and attach to “+” terminals of the discharged battery. We connect the second positive terminal to the accumulator's donor;
We take “-” start wires with black handles and attach to the minus terminal of the accumulator donor, and the second end to the discharged battery;
Wait a few seconds and you can gradually start the car, immediately after the plant, we give it to work at medium speeds for 10 minutes, which gives the engine to heated and plus recharging the battery;
Use the engine;
First, remove the minus wire from the discharged battery and then remove the second minus, then remove the pluses in the same way;
Take the car and move to the destination without stopping, so as not to stall again.

Video: how to light a car (tips from RDM-import)

Is it possible to light a diesel car?

In the event that it is necessary to start a diesel car from another car, you will need the same or greater engine volume of the engine on a diesel engine, since a significantly greater energy is required to launch machines on a diesel engine.

How to light a car from a battery without a car?

Of course, you can start a car without another donor car, but only if you take care in advance and purchase a starting and raising device. Yes, it costs a certain amount, but takes a minimum of space in the car and solves the problem on the road without the participation of passing cars.

So, the start-up device is connected to the network, the switch is put to the “start” and connect the “+” device to the “+” terminal, and “-” to the engine block, as close to the starter as possible.

Next, start the car and as soon as the engine earned to turn off the device. Having reached the point of purpose to charge the battery. By the way, this device is suitable for absolutely all machines and safer than lighting from another machine.

Is there a taxi with a service to light a car?

Another exit from the situation, but it, of course, works exclusively in large cities - a taxi with a car cigarette, as well as a taxi, the driver of which will help to tow the car to the right place, as well as to provide petty repairs, if necessary. There are quite a lot of such services in the Russian Federation, both taxi services and online sites where you can urgently order a service. What to choose is up to you.