How to properly and carefully stick a protective film on the screen screen, a tablet without bubbles at home: instruction, photo, video. How to remove air bubbles from under a protective film: Tips

How perfect, stick, glue, glue a protective film on a smartphone, phone.

From the article you will learn how to stick a protective film on the phone, on a smartphone, iPhone 5, 5S, 6, 6S, 7, 8 Xiaomi, a tablet on your own. The whole process will not take much time, and the manipulations are not complicated. The main thing is the accuracy and lack of haste.

How to properly and carefully stick a protective film on the screen of the Samsung smartphone without bubbles: instructions, photos, videos

• Why do you need a protective film on the phone - it will answer without hesitation, each holder of the gadget: a thin film will protect the smartphone from scratches and will serve as an additional line of defense in case of the phone falling down.
• A thin protective coating significantly reduces the risk of screen damage. It has the main impact force. Therefore, buying a phone, it will be worth making sure that the protective film was pasted already in the first days of using the gadget.

How to stick a protective film: instruction

• On which film you will purchase for your smartphone (on which manufacturer) depends on how long the film will last and whether you can choose a coating for a specific phone model.
• Of course, you can opt for a Chinese universal film, however, count on the occurrence of difficulties in the process of gluing the film on the screen, as well as the fact that the protective coating will not last you long.
• Among the most famous manufacturers of this category of goods, SGP or Ozaki can be distinguished. You will have to pay more for the film, but the result is worth it.

• If you select a protective film under your smartphone model you have no opportunity (no in stock or you need to wait a long time for the receipt of a new product to a specific store), then there are universal Chinese films at your disposal. Their disadvantage is that you will have to tinker a little, cutting out the film to the size of the screen of your smartphone. Do not forget about the short service life of such a protective coating.
• If you already have a protective film for a smartphone, then we proceed to the second stage - gluing.
• We transfer everything that we need in the process of work on a solid surface. Clean the working surface of dust. My hands with soap before we start gluing. This is necessary so that we inadvertently leave on the inside of the film oily fingerprints.

• Prepare a card from dense cardboard. Soft plastic is also suitable. This simple device will help us get rid of air bubbles after the film is glued (they will need to be squeezed out).
• We remove the old film glued to the screen. We do this carefully, without the use of sharp objects that will leave scratches on the screen.

How to quickly remove the old film? We take adhesive tape. We tear off two pieces and glue them onto the film. We glue one piece on the upper edge of the film, the second piece on the lower edge. Now you need to carefully pull the edges of the film up. After removing the old protective film, you can proceed to the next stage.

• Let's clean the smartphone screen of dust, remove the remaining glue from the old protective coating. We need a special antistatic spray, a microfiber napkin.
• If you purchased a high -quality film, then such a napkin is equipped with it. If you do not have a spray, then do not worry: the alcohol napkin will perfectly cope with the cleaning function. Sometimes a protective film is equipped with a microfiber and an alcohol cloth.

What can not be used when cleaning the smartphone screen:

• alcohol
• medical alcohol
• various abrasive liquids

The process of cleaning the display and gluing a protective film is as follows:

• We spray a little spray on the smartphone screen. The spray hit in the gaps of the case will not violate the work of the smartphone: the microcircuits will work properly, because the spray does not conduct current, being a dielectric.
• We wipe the microfiber with a telephone screen to a shine with a microfiber with a microfiber. We get rid of the visible traces of dirt and small dust particles in this way.
• We switch all our attention to the film: you need to remove the layer from it, which covers the adhesive surface.

• We have a film above the smartphone. We align the protective coating so that all cutouts coincide with the edges of the screen and the location of the buttons. We lower the film on the screen without haste. We do not twitch, but let the film align yourself.
• If you started lowering the film and slightly shifted the edges, then do not worry: it is enough to raise the film over the screen again, align and repeat the manipulation of the film on the screen.

• Gently smoothing the film, trying to squeeze the air bubbles. We squeeze the remaining bubbles using a card: we pass by a card on the film from the center to the edges. It is not necessary to use force, because scratches can remain on the film.

Pistles, villi or hairs that remained after gluing the film are removed as follows:

• We cut off a piece of tape and fix it to the edge of the film. Gently raise the film. Now the second in advance cut off the tape we peel the dust from the film. Again, smooth the protective coating.
• In addition to some protective films, in addition to napkins, there are special sticky strips. It is convenient to extract dust dust from under the glued film.

Video: How to glue a protective film on the Samsung Galaxy S3

How to properly and carefully stick a protective film on the screen of the phone iPhone without bubbles: instructions, photos, video

The protective film, glued in the cabin, does not bubble, and the general view of the gadget with the film is neat. But if you glue the protective film at home, then at least how much do not repeat the manipulations with the application of the film, the result leaves much to be desired. And why? You just need to know how to make this not very complex procedure correctly.

How to stick a protective film on the screen of the iPhone:

• Let's start with the preparation of the room. To do this, you need to get rid of the dust, due to which unreasonable tubercles, filled with air, under a protective film, can form.
• An ideal working surface for ennoble the phone is a kitchen table. If you decide to bite the film in the living room, in the bathroom, you will have to come to terms with the fact that particles of the micromer will remain under the film.
• The reason is banal: in these residential premises there are many things from textiles. And the furniture, carpet coatings are real vacuumboards, you cannot completely get rid of which you can’t completely get rid of the period of the device. But, for example, towels, rugs, lips can be taken out of the bathroom.

• If it seems to you that the room is clean enough for such a simple procedure as gluing a protective film on the screen screen, then you are mistaken.
• Dry air is just a repository of light dust particles soaring everywhere. A spray gun will help to get rid of their main mass. After its use, the dust becomes wet and heavier particles will fall to the floor.
• If you still decide to glue the protective film in one of the living rooms, then make sure that the room is exhausted: a slightly wet napkin will help get rid of the micromer on horizontal surfaces.
• Cooking tools. What will be needed for work? A phone or another device to which you need to apply a protective coating.
• The tool with which we will clean the screen.
  You will also need an antistatik or ordinary alcohol. We will prepare a credit or any other plastic card in advance.

• A clerical knife and microfiber will be needed.
• Now you need to remove the hair and put on the appropriate clothes, for example, from cotton. Woolen things are not suitable. My hands with soap and put wet wipes next to the working surface.
• We will use them in case of dust particles of dust, minimizing the risk of dusting under the protective film.
• A universal film for any phone model must be prepared for gluing in advance. In this step, we need a stationery knife or ordinary scissors: we measure the contours of the device and get rid of the extra strips of the film in the most convenient way, adjusting to the right size.

• It is also necessary to get rid of the remnants of the factory film. It can be used as a basis for adjusting a new protective coating. Attach the old film to the new one and cut the excess to the outlines.
• If you need to perfectly fit the protective coating to the size of the screen, then make a television device in full size.
• Now degrease the display surface using a special fluid, antistatics or alcohol. Small dust dust, villi are removed with a microfiber napkin. All further manipulations should be carried out so that the fingers do not touch the gadget screen. Also make sure that the sleeves of clothes do not hurt the screen.
• We glue the film. We will need to remove the first layer that connects to the device screen. We turn the film with this side to the display and combine with it. At this stage, it is important to check whether the bends and holes for buttons coincide.
• Gently separate the first layer from the protective coating. We hold the film by the edge, without touching the hands of the first layer.
• We attach the protective film to the display. Start from the edge. The rib of a plastic card will help lay the film in the right direction. If bubbles are formed in the process of placing the film, use a plastic card: we press the card from the central part of the film to the edges. If all our recommendations regarding the preparation of the premises for work and dust removal have been completed, then the problem of disadvantageous bubbles does not threaten you.
• Remove the second layer of film.

We check if the ill -fated dust dust remained under the screen. If so, we use stationery tape:

• We cut off two strips of adhesive tape.
• We put one piece of tape to one edge of the protective film and raise the film carefully. We need a second piece to remove the speck of dust. We return the film to the place and use the plastic card to align the edges.

Video: How to stick a protective film on the iPhone 5

How to perfectly glue the protective film on the tablet without bubbles: instructions, video

Video: stick a film on the phone

How to remove air bubbles from under a protective film: Tips

• For many owners of smartphones of new models, the presence of modern functions in gadgets is not so important. The main thing is that the phone emphasizes the status of the owner. In the case of a scratched smartphone screen, there is no need to talk about style and status.
• To prevent such possible troubles, a protective film is used, which is glued on the phone display. The only difficulty arising in the process is the appearance of air bubbles under the film.
• If, after gluing the protective film, air bubbles and tubercles formed, then getting rid of them at home, without resorting to the services of the master, will be difficult.
• The reason for the formation of the bubbles is the entry of dust particles or particles of the micromer under the protective coating, which significantly complicates the process of getting rid of the “defect”: in some cases, only a complete replacement of the film helps.

How to get rid of bubbles under a protective film:

• We check whether the display is a protective film.
• We wipe the screen of a mobile or tablet with a microfiber napkin (they are usually equipped with a protective film). You need to try to make this a single movement.
• We turn on the bright light and check how clean the mobile device screen is. There should be no spots, dust dust on the display.
• In the process of gluing the film, we do not touch the open adhesive of the lower layer of the film, on which there is a sticker with a number 1.

• We try to glue the protective film so that its edges coincide with the edges of the display and lay down exactly horizontally and verticals. We finally remove the lower adhesive layer and apply the film to the display.
• We make sure that distortions do not form. If they could not avoid their appearance, then we carry out repeated gluing the film.
• We use a plastic card or a special scraper that is included with a film and a napkin, removing the bubbles formed under the film.
• After all these manipulations, you can remove the last layer of protective coating, indicated by a blue number 2.

Now you know how to glue a protective film on a smartphone, iPhone 5, 5s, 6, 6s, 7, 8 Xiaomi, a tablet and how to get rid of air bubbles.

Video: How to properly glue a film on a smartphone