How to cut yourself as a machine beautiful - on which typewriter to opt for? Haircut with a machine independently: step -by -step instructions, tips. How to make a male haircut machine at home

In the article you will learn how to cut your hair at home on your own. Which devices are better to use?

Content

If you want to experiment, and do not spend money on a hairdresser, then you can buy a machine and make haircuts with your own hands. Thanks to the desire to learn how to cut yourself, you can save a lot of time for hiking in beauty salons. Another, you will have the opportunity to open your own business.

You can cut your friends and friends at home. After all, for this you need to quite a bit, just buy a good machine, learn the basics of skill. This is what will go further about, you will learn how to cut a person with a person with different ways.

How to make a male haircut machine at home: Select a machine

In order for the training of hairdressing to be successful, stock up on high -quality equipment. The machine of good quality, with an excellent battery and all kinds of nozzles - is simply necessary in this situation.

IMPORTANT: Masters of hairdressers use certain tricks - they smell the external working side of the device with a certain lubricant. That is why the cutting process is smooth. The device carefully cuts the strands of hair and does not tear them out.

It is also important to choose not the cheapest models of cars, it is better to buy a professional, imported device. This technique will be a reliable assistant for many years. There are different types of such machines, then we will learn more details on which it is better to stop the choice.

Pros, cons of vibrational machines

This technique is perhaps the most noisy. However, the power of the devices of this species leaves much to be desired. The time of the haircut car is enough for twenty minutes. When her charge ends, she will simply turn off and that's it. Specialists will never do such haircut tools due to the fact that after several customers their hands will get tired. The vibration of the device will immediately make itself felt.

It is also inconvenient that the knives of the cars are not removed. Therefore, their maintenance is difficult. But some models of vibration devices, the cost of which are higher, work well, they can be considered a model-Oster-616.

Pros, cons of rotor machines

This type of device is characterized by the uninterrupted operation of the device for about an hour, because they have good engines. Experts say that cutting this type of typewriter is much more convenient, because they have reduced vibration levels. The only negative that the device weighs much more vibrational prototype.

This model of the device has a decent amount of all kinds of nozzles. Thanks to them, you can create any haircuts, and the density of the hair does not matter. The hairstyle in any case will turn out perfect.

Pros, cons of batteries

The advantages of devices are that they feed not only from the battery, but also from the network. It is a pleasure to cut the machine, it has a slight weight and quickly the process of cutting occurs. For beginners, this device is just a find, it can be used for a long time. For home use, the equipment is simply indispensable. The weight of the device is only 150 g, which is why it is easy to cut a person for a long time until you master skill.

How to make a male haircut machine at home: Tips

Before you start cutting a person, preparatory work should be done. They may consist of preliminary hair washing. After you wash your head, slightly dry the strands of hair. The preparation process is necessary, otherwise, skin fat can hide into the knives of technology. Professional machines are allowed to cut even wet hair. The cheap analogues of such devices will not cut wet curls. They can simply swipe the blades.

Tips for cutting a machine:

You can trim, both dry and slightly moistened curls. In order for them to be moist, they can be sprayed with a spray gun. It will be good if you carefully comb the strands, and only after that you will move to the process. If you just need to remove the length, then use your fingers like a clothespin for hair and a regulator of the required length of the strands. Take the strands and pull with your fingers at an angle of 90 degrees to the head. Cut as much hair with a machine as you need. The result is a short haircut.
The process of cutting in men is usually carried out against the growth of strands. You need to start cut with the occipital zone. Move to a certain feature that is called the edging. It is on it that the border between long and short strands is determined.
The border of the edging is determined by different methods. If you want to make a militarian haircut, then the back of the head is most often shaved, as short as possible. When moving to the next part of the haircut, it is necessary to ensure that the edging line does not stand out too clearly. It is interesting that men's haircuts are much easier to make a machine, due to the density of the hair.
Transitions to the border of the edges are made using nozzles number 2 or 3. And it is recommended to use the nozzle number 4 on the top of the head.
Particular attention should be paid to cutting the temples. This part is noticeable from either side, the mistakes of inexperienced masters will immediately become obvious. Therefore, the beginner hairdresser should try to take into account all the wishes of the client, and his work was appreciated. Form the whiskey very carefully, especially the machine, one extra movement and hairstyle is spoiled.

You can easily learn the skill of hairdressing, if you follow the instructions. Beginners should not rush in the process. It is better to cut the strand slowly behind the strand. The bangs must be decorated with scissors. If the young man has curly hair, then it is better to cut without bangs.

Experienced masters advise beginners to work slowly, otherwise with one careless stroke of the machine, you can ruin the whole haircut and mood to the client. Whiskey is cut either with a oblique or direct method. In the case when a man has a beard, the line of the border is not advisable to make too obvious.

To complete the haircut, apply scissors. They will be able to carefully arrange the lower line of the strands. If the hair grows too low, then you can fill it with a machine. Adolescents are not recommended to do this, otherwise coarse hair can begin to grow already at a young age.

Haircut with a machine independently: step -by -step instructions

Those who are used to saving on beauty salons can try to carry out a simple haircut with a machine on their own, the main thing is to adhere to a step -by -step guide, which is described below:

Wash your hair thoroughly, dry it slightly. It is more authentic to comb the curls more genuinely.
For the first time, the cutting will go for a long time, so be patient. Start the preparation process with the device. Put on it the knife that will correspond to the necessary length of the curls.
Surround yourself with mirrors so that you can clearly see both the front and back of the head.
If you have a large length of hair, then cut it with the largest nozzles. Try to do without such a tool as scissors.
Start moving the machine from the side of the bangs, move the device to the crown. Keep your hand exactly so that the strip from the machine remains straight. And so make a line behind the line. The main thing is that the angle of inclination of the knife is the same, then the hair will cut off evenly.
The occipital part will be not easy to arrange, for this you will need some skills, and a good viewing of the back of the haircut. Start cutting the occipital part to the border of the edging. Only after that, go to the desired length of the knives, and process the part of the head with the machine above the edging.
At the end, using a special nozzle, arrange the necessary hair length in the temporal area.

How can you cut your own at home on your own?

How to make a modeling hairstyle with transitions?

The first time it is not easy to learn a model haircut, but it is possible. It is important to make smooth transitions. You will have to work as a machine, both with knives of different lengths, and without them. Measure the required length of the curls with your fingers, then cut off on weight. Curls are cut according to the same rules as usually, first they cut their heads in the field of bangs, crown. And after the back of the head, using knives of various numbers.

They begin to cut off from below, end at the top. Below they make hair shorter, and at the top the machine is torn off from the surface of the head to get the strands more authentic. At the end, whiskey is designed.

Tips for the processing of the temporal zone:

Whiskey is one of the most difficult stages of haircuts. They are cut into either oblique or direct method. The length is selected individually. You can leave the length to the middle of the auricle or at a level with the lobes. The length of the hair on the temples is adjusted to the knives of the device.

Secrets of trimming bangs with a machine:

For the design of the bangs, you will still need a comb. With its help, it is easier to control the length of the strands. And the machine will only have to cut the length. The cut line goes even thanks to a special comb.