How to cut a man, a child at home: step -by -step instructions for beginners

We bring to your attention a detailed master class on how to independently cut a man or boy at home, considering the most popular models of men's haircuts.

Content

Additional experience is never superfluous. And situations are different when there is no way or desire to turn to a professional hairdresser. Whatever your goal, we will help to master the main skills in order to cut a man at home. And then, as they say, it is already a matter of practice. The main thing is to understand the essence and scheme of men's haircuts.

A simple master class for beginners, how to cut a man, a boy: an algorithm of work by a machine

First of all, we will consider a master class on how to cut a man on your own, for beginners or completely inexperienced masters. It is for those who first will hold a haircut machine in their hands.

Comb the strands on hair growth. We divide the head into zones - the lower and upper occipital, temporal and parietal.

We work with the lower -veil region:

We attach the base of the machine to the upper ear. The width of the "paw" - This will be a landmark where to bring the blade. We use the nozzle No. 2 - 6 mm.

We focus on the width of the machine for determining the height

We press the blade tightly and move up, Against hair growth.Make sure that the teeth cut the hair, and do not go just on the surface.
When we reach the visual line, which is equal to the width of the machine, smoothly We bring the blade on ourselves.And discard the cut hair.

We repeat the procedure several times to cut off all unnecessary hair. With the hand, bend the ear shells down.

On the occipital part, we make the same scheme, measuring the width of the machine blade from the neck.

The height in the occipital region is also on the vessel of the machine — The height in the occipital region is also on the width of the machine

Smooth the outline in the upper and altitude region:

Next, we need to make a smooth transition to the crown - we use nozzle No. 3, 9 mm.
Similarly, measure the width of the machine, you can control the level with a comb. We spend upwards and on ourselves. We go throughout the circumference of the head.

We make a bottom of the bottom:

We use the nozzle No. 1, 3 mm. The movements are the same - be sure to start the blade on ourselves so as not to cut off the extra part of the hair. Width 1 cm from the edge. By this we create a transition from the edge to the first strip of haircut.

At the end, we remove the nozzle and work with a “bare” blade. We start with the center of the back of the head. Put the blade perpendicular And move down. Movement for hair growth!Therefore, in the side of the back of the head, we turn the machine at an angle. Then we turn the machine and go against growth, not reaching the edge of the haircut 1-2 mm. Create a smooth line and cut the fluff on the neck.
In the lateral part of the head, we work in the same way - we move in the direction of hair growth, lowering the blade down. In the opposite direction (against growth) do not need to be shaved. But remove all the corners.

We form the temporal part:

It is straight and oblique. No need to invent anything - see how the hair grows from nature.

A straight haircut of the temporal part - the blade is strictly perpendicular to hair growth, we go down.
Along the oblique line - put the blade at an angle, also move behind the growth of hair from both sides (see photo)

Processing of the temples and behind the ears

How to cut at the ears:

We bend the ear sink and work only with a corner! The blade towards the client. Gently cut the unnecessary part of the hair, moving perpendicular to their growth. It is important not to press the machine to the hair so as not to spoil the haircut! Therefore, we work only by the lower part.

Video: how to cut a boy - a children's simple haircut

Step -by -step instructions on how to cut a man, a guy with scissors: we form a crown of haircut "Polobox"

The length of the hair on the crown in the haircut "Polobox" can reach up to 3-4 cm. Bangs and asymmetry are often used. Due to the fact that light negligence and “torn” edges are allowed, cutting a man at home is a little easier than perfectly perform the classics.

Important: to cut a man with scissors, we work with wet hair!

We also divide our heads into pieces, we begin to work with the back of the head. Exist Vertical and horizontal partings.Now we will work with a vertical. Count each strand well. Put the hand on the crown, fingers down.

The ring finger in the lower ring of scissors, the thumb is in the upper one, with the working position. In non -working - we take out the thumb and capture the scissors.

We form a strand with your fingers, comb it and capture it between the middle and index. You need to cut off everything that goes beyond the fingers.
But! We raise our palm, hold it evenly, parallel to the circumference of the head. The palm should in no case be relaxed on the top of the head, otherwise you can cut off the excess!

The first time to get used to - grab the strand, put your hand and wholesale pull your palm. We cut off the excess, comb. Again, form a strand, slightly capturing the previous one. We cut and continue the strand behind the strand, in a circle.
We perform a "connecting haircut". Those. We form a smooth transition. To do this, we conduct a comb from the bottom, a little at an angle, capture the strand with your fingers (Fig. 2). We also take the hand a little and cut off in a straight line.

Rice. 2: Squeeze the strand tightly with your fingers! — Squeeze the strand tightly, the supports on the fingers!

Next, smooth out the contours or filter the men's haircut. We go along horizontal lines. We do not drive the comb parallel to the skin. We begin to comb out from below, and already on the top of the head we take it up, as if continuing the line. And we cut off the excess from the comb with filtering scissors. The movements of the blades are fast, slightly careless, thoroughly cut each hair. We need to achieve a natural contour, and not to twist the oval. We lead the comb, slowly.

Important: see in which direction the hair is. In that direction, comb out the hair on the top of the head, forming a parting.

If you have a parting on your left side, then we will twist your hair as close as possible to it. On the back, we leave the hair a little longer.

We remove with twigs a little volume on top, on the top of the head. To do this, capture the horizontal strands, pull the hand slightly and cut off with quick movements at the ends. The movements should not be even - the cut should be at an angle!
In conclusion, we cut the bangs. It also forms it with refrigerating scissors - even lines in hairdressing are not welcome. Comb the hair, they should lie down freely - then you will see what needs to be cut. A properly made men's haircut, when without styling the hair looks good and natural.

You can additionally select the parting.

Video: How to cut a man with scissors?

How to cut a man correctly: Boxing haircut

The “boxing” haircut from the “half -box” differs only on the top of the crown - up to 2.5 cm.

We work according to the scheme below (Fig. 1). This is a more professional algorithm, how to cut a man of any age in the style of a classic haircut. By the way, it is considered the most popular among men!

We work first by nozzle No. 3, 9 mm. We glide over the hair up, capturing each strand. At the visual level level, we bring the machine to ourselves. For accuracy, we fix the line of the comb. It is located at the level of the frontal bend.

Please note: the line is not strictly horizontal! In the back of the back of the head, it lowers a little. We begin to work with the back of the head (in the photo a rectangular parting).

We go to the nozzle No. 2, 6 mm. We retreat 3-4 cm, visually mark the line. We bring the blade to this mark. We repeat the same algorithm, bringing the blade to ourselves for a smooth transition. Well cut places near the temples. We drive a machine several times to remove all unnecessary hair.

IMPORTANT: We pass the machine against hair growth! Therefore, we do not always go strictly upward, turn it at that angle, as the hair grows. Closer to the temporal part, the distance between the crossings is narrowed.

Next, we change the nozzle to No. 1, 3 mm. Swift at a height of 3-4 cm to the zone C. Behind the ears and near the temples you need to keep at an angle so that there is a smooth transition. We work the lower half of the blade, and the upper part leaves the surface of the head.

Height 3 cm — We bring the machine to ourselves at the junction of the transitions!

We make a edging without a nozzle. Behind the ears we work with the tip of the blade against hair growth, on the back of the head - the whole blade, dropping strictly down behind the growth of the hair. On the neck we shave against hair growth, without violating the created edging.
Now we finish the edging (literally 2-3 mm), substituting a comb and shaving excess hair (see photo).

The length in the zone d - 2.5 cm, Cut all the hair on horizontal strands that above the fingers (lifting them a little). We hold the palm at an angle of 90 ° to the circumference of the head. Then it connects the zone in and d on the sides and on the back of the head, placing the hand parallel to the circumference of the head, we make a smooth transition. We pass several times so that there are no “triangles” and corners. Those. We process the zone E, pass through it repeatedly on vertical strands. From one temple, through the back of the head, to another.

The bangs are cut parallel to the edge of the hair growth line. Those. We comb the bangs on the forehead and cut off the excess, if necessary, filter. It is better to cut dry bangs! In order not to cut off the excess.
We finalize the edging - We have a comb parallel to the hair in an upright position (!) And cut off the extra tips. We filter all the protruding or uneven edges under the comb.

Video: How to cut a man at home - a haircut box with asymmetry

How to cut a man with a typewriter under the nozzle: Militari sports haircut sports haircut

A sports haircut, like a classic, can be different. But in order to cut a man at home, it is worth mastering the so -called basics. Of course, a sports haircut can be at zero (or several millimeters) and is performed with only one nozzle. But for example, we will consider Militari. An equally popular haircut, somewhat similar to the "semi-bogs", but part below the temples is shaved to zero.

The front zone (crown) cut the nozzle No. 3, 9 mm. If you have more nozzles, you can take 10 mm, and if desired and 12 mm for a larger length. We carefully pass against hair growth in all directions several times. Especially in the area of \u200b\u200bthe "spirals" from the hair we are repeatedly passed from different angles. The line reaches the protruding temporal part.
We go to the nozzle No. 1, 3 mm. We reach it just to the previous transition. Do not forget to take the blade a little at the junction of the lines.

To smooth out this transition, we use a comb. We put it parallel to the circumference of the head, strictly diagonally! We shave everything that appears beyond the comb.
And in the end we reduce the lower part of the haircut without nozzle to zero. In the photo we see that this zone is located significantly higher than the classic haircut about 2-3 cm-above the upper part of the ear, smoothly bending on the back of the head. If you have shortcomings, also take them on the transition line using a comb.

Important: well go along the contour on the back of the head and in the temples, make clear lines in the forehead. To do this, use a knife, a razor or a trimmer. In the absence of additional tools, take a blade very carefully without a nozzle for and against hair growth.

You can reduce hair to zero on the back of the head — At the back of the head, we drive hair to zero

Important: if you want to leave the length on the top of the head, then do not touch it yet! We work according to the described scheme below to the frontal hollow. On the crown, cut with scissors or the longest nozzle slightly shorten the length, moving behind the growth of hair (towards the forehead)!