How to choose the size of the front door for the opening: advice of specialists, compliance with the size of the opening and size of the front door with the box. What are the standard and minimum sizes of the inlet doors? What sizes of the site should be in front of the front door?

In this article we will get acquainted with the parameters that are installed for the entrance doors from various materials.

The front door installed in an apartment or house affects the first impression of housing. If the door is selected without errors, it will not only be a beautiful decoration of housing, then it can protect against the penetration of ill -wishers. You should know that the entrance doors are those that are installed at the entrance to the apartment itself, the house, and at the entrance to the entrance.

How to determine what the size of the front door is needed: parameters

Determining the door parameters, its selection for opening will help you save time and means. After all, if you take incorrect calculations, you will face a situation where you need to purchase a non -standard door, change the size of the input passage or add the wall finish.

Today there are standard door parameters of both domestic manufacturers and imported ones:

• Width: from 60 cm to 80 cm.
• The thickness of the box itself: from 1.5 cm to 4 cm.
• Height - 2 m.

Therefore, if you started installing a new door, knowledge of parameters will help you adjust the size of the opening. Since the standard door is about 30% cheaper than a non -standard door.

To calculate the size of the door use the following methods:

• During installation of the door, to start, measure the hole in the wall where you plan to insert a common block.
• On the door leaf, find the parameters indicated by the manufacturers. You can also find these parameters in the documents attached to the product.
• Get the door box size as follows: add about 60 cm to the width of the common canvas. Then, to the height of the canvas, add 30 cm. The size directly affects the size of the opening, from the size of the door leaf.

Now we find out what is the width and height of the door leaf:

• The width is the main parameter indicator. If the width of the opening is 93 cm, then the canvas must be taken where the width is 80 cm. If the width is 90 cm, the opening will be very narrow, and with a width of 72 cm - very wide. During the calculation of the width, be sure to consider the thickness of the door (approximately 3 cm) on both sides of the canvas, plus a reserve that gives for installation.
• Measure the height on both sides. The classic height is 2 m. If the opening is 2 m 15 cm, then you need to take more than one platband. In this case, you will have to install very wide platbands or reduce the height of the opening. If the passage is less than 2 m 3 cm, then the standard door will not enter it. You can cut it (not particularly desirable) or expand the passage itself (additional funds will be required).

How to measure the doorway. The following tips will help you:

• Measure the width from one wall to the other wall.
• Measure the height from the wall to the floor surface.
• When you shoot measurements, remove the platbands.

To get the exact parameters of the front door, follow the following actions:

• If the door does not have a threshold: 2 m + 2.5 cm + 1.5 cm + 1 cm \u003d 2 m 5 cm
• If the door has a threshold: 2 m + 2.5 cm + 2.5 cm + 1.5 cm + 1.5 cm \u003d 2 m 8 cm

What sizes of the site should be in front of the front door?

To go to the house, you must first go through the site, which is located in front of the entrance. Separate requirements are imposed on this site. It all depends on a certain situation and on the housing itself.

• The floor of the site should have a solid surface. It should not be chips and potholes. If the site is provided in a private house, then be sure to hang a visor above the door. It is desirable that this canopy closes the entire site.
• If the door opens into the room, then the size of the site from the door to its edge should be at least 120 cm. If the door opens from the room, then the distance should be at least 150 cm. The perfect width of the site itself can vary from 2 m to 2 m 50 cm. For the vestibule, a platform is suitable, the width of which is 1 m 80 cm.

These dimensions are necessary in order to make it more convenient and safer to move around the site who have limited needs. For example, women in a position or mothers with children in strollers.

If the site is slightly raised, equipped with steps, then it is necessary to install the railing. To do this, get comfortable railing so that they are well captured with your hands and do not slip. Do not forget to hang a lamp above the door, because in the dark in the night or at night you can fall, get injuries. Place the lamp at a height of not more than 2 m from the site. The path that leads to the door is also illuminated.

What are the standard and minimum dimensions of the entrance doors in apartment buildings?

Thanks to the standard doors, the companies are able to use special equipment that does not need additional reconfiguration for the minimum values \u200b\u200bof the dimensions.

Standard door leafs have the following advantages:

• On the market you can always find a large assortment of doors, which makes it possible to choose the most perfect model, taking into account your wishes and preferences. Firms make classic metal models, insulated options that are not afraid of temperature changes.
• Easy installation. The doors almost coincide with the size of the openings. They are attached simply: the door is fixed using anchors. Non -standard elements are more complicated. Here it is necessary to additionally expand the doorway.
• Price. Standard doors lower significantly costs. And all because production algorithms are used, which can be automated without problems. Many modifications are made of inexpensive materials. This also affects the cost of the product.
• Universality. Doors after installation can be replaced without problems: the old canvas is dismantled, a new, standard size is inserted.

To choose the right door for a new apartment, consider the following standards:

• If you purchased an apartment in a new building, then you will have to buy a door: 1 m 95 cm high - 1 m 98 cm, 74 cm wide - 76 cm.
• If your future apartment is in a brick apartment building, then the door is suitable for you: from 88 cm to 92 cm, from 2 m 5 cm to 2 m 10 cm.
• Designs are suitable in old apartments: from 83 cm to 96 cm (width), from 2 m 4 cm to 2 m 60 cm (height).

What are the standard sizes of input metal doors with a box in an apartment, a cottage, a private, country, country house according to GOST: width, height

The standard parameters of ordinary doors are the following:

• Height is 2 m 3 cm.
• The width is 90 cm.

During the calculation of the opening parameter, take into account the fact that there is also a framing edging along the perimeter of the input opening. In old buildings, this edging is made of natural wood. Therefore, she removes during the replacement of the door. In new high -rise buildings, as a rule, such a edging is made of metal, and therefore it is difficult to remove it. Therefore, take into account the width of such an input opening with the size of the edging.

In addition, very often in order to expand functionality, the width of the overall structure is also increased. Doors with 2 sashes are mounted in the resulting opening.

What are the standard sizes of input plastic doors with a box in an apartment, a cottage, a private, country, country house according to GOST: width, height

The doors made of plastic are firmly fixed in our lives. Today they are installed in stores, offices, shopping centers and other similar institutions. Plastic (PVC, polyvinyl chloride) - known material from which not only doorbells, but also windows are made. Today, many people have already been able to evaluate the strength and reliability of such structures, their simplicity in operation and care.

During the manufacture of plastic doors, liners made of metal are used. Therefore, such structures are also called metal -plastic. According to GOST, plastic doors have the following parameters:

• Height: from 2 m 17 cm to 2 m 42 cm.
• Width: from 70 cm to 91 cm.

By design, PVC doors are divided into such categories:

• Single -pool doors. These doors can only be opened in one direction.
• Double -floor doors. These doors are usually opened in both directions. They have a stalking system of closing, thresholds, a transmig on the side or at the top.

By type of filling, PVC doors are divided into such types:

• Deaf (inside the doors there is a heater).

Glazed (in such doors there is a double -glazed window or glass sheet).

• Light (the lower part is made of the canvas, the upper part of the glass).
• Decorative.

What are the standard dimensions of the input wooden doors with a box to the apartment, cottage, private, country, country house according to GOST: width, height

Such designs have a variety of openings, with different sizes. Dimensions data depend on a large number of indicators. So, if there is a sheathing or glazing, the door will have such parameters:

• Width - 90 cm.
• Height - 2 m 10 cm.

The indicators that affect the parameters of the openings should include:

• Dimensional grid, which is located inside the frame.
• The number of sashes.
• The size of the threshold.

The thickness of the protective strips that must be installed may depend on the material:

• Planck made of wood - up to 19 mm.
• Planck from chipboard - up to 3 mm.
• Plastic bar - no more than 2 mm.

What are the standard dimensions of the input double doors with a box in an apartment, a cottage, a private, country, a country house according to GOST: width, height

The value of any type of double door block is determined by the following parameters:

• Height - from 2 m 7 cm to 2 m 37 cm.
• Width - from 1 m 91 cm to 1 m 95 cm.
• GOST made the thickness of the door wards. However, so that the front door can perform all functions, the thickness of the metal wings should be at least 2 mm.

Foreign companies making doors also decided to follow the domestic standards of GOST. So, for example, Chinese -made doors are absolutely identical to the size of the domestic GOST.

Metric and English door measurements systems

Since the market today presents a large number of door structures of domestic and foreign companies, there are different computing systems in everyday life. When choosing the door, consider the system that the manufacturer offers.

Metric

• A simple metal door has the following parameters: height 2 m 4 cm, width - 82 cm 6 mm.
• The enhanced metal door has such dimensions: height - 2 m 5 cm, 86 cm wide.
• Double doors, as a rule, have the following parameters: height - 2 m 41 cm 9 mm, width - 1 m 91 cm.

English

Many foreign manufacturers, when they make doors, use the English measurement system. Standard doors have such dimensions:

• Height - 6 foot 8 inch.
• Width - 2 foot 9 inch.

If these indicators are translated according to the metric system, then they will correspond: height - 2 m 32 mm, width - 84 cm.

It is a pity, but today not everyone is trying to adhere to standard parameters and standards. Therefore, people order non -standard door structures.

What is the width and height of the doorway for the entrance metal, plastic and wooden door: the size of the size

In many houses and apartments, the parameters of the doorways comply with the standards that were established during the Soviet Union. But then the doors were made exclusively from natural wood, and therefore there was no such large range of products on the market. Today, firms that produce doors are also trying to follow certain conditions where the height correlates the width. But the principle of choice of size directly depends on many constructive and aesthetic indicators.

The dimensions of the doors produced by domestic companies have such ratios with openings:

Video: How to choose the front door?