In the article you will find tips for cleaning the printer and its spare parts at home.
Content
How to clean a jet printer at home: a printer cleaning program
Each modern person has a printer at home or at work. This is a very useful and necessary equipment for those who are dealing with papers, documents, an office and computers.
The printer converts the digital material into visual, applied to paper. This can be useful for schools, teachers, students, students, scientists, administration and other areas.
It is no secret that printers often leave the working system. The reason for this is the frequent use of the machine, not entirely neat attitude and low quality of paper. For the printer to serve you for a long time and correctly, do not save on the device itself, purchasing it, buy high -quality office paper and regularly clean it at home on your own!
The first thing you should do after buying a printer is to find a disk in the packaging and box. This is a disk with the software that belongs to each printer. Absolutely all manufacturers produce them and it is needed in order to establish the connection of the printer with the computer.
Important: as a rule, the disk has a convenient installation menu, where the user gradually presses each subsequent button, giving consent to the installation. If you do not have a disk (lost, for example), you can download the program from the official website of the company producing the printer.
After installing the program, find the item in the menu called "Cleaning" or "Print quality". There, select the parameters:
- Cleaning the video
- Color correction (saturation)
- Sopel cleaning
- Printer head cleaning
Important: each cleaning stage requires a sufficient amount of paper to restore print quality.
This is a simple but very effective procedure aimed at eliminating simple problems with the printer (such as clogging, drying or stagnation of paint). More serious problems are eliminated in other ways.
Cleaning sniffles, roller, printer head with liquid: how to do it?
If the printer head is clogged (an important print part), it is best to take the entire printer to the service center, where they can make its professional and high -quality cleaning with special liquid.
Important: professional cleaning is always preferable to manual. It gives more chances that the device will work regularly for a long time.
What to prepare:
- Plastic glass or container
- Plastic disposable plate
- A rag or towel
Important: in the store you can purchase special sets for cleaning the printer, which have varying degrees of purification intensity: aggressive or ordinary.
How to do cleaning:
- Pour the cleansing liquid into a plastic cup
- Wipe the printing head of the open printer (lower part) with a clean and soft rag (lower part).
- Drink the other edge of the rag with purifying liquid and wipe it with the entire printing head.
Important: try not to hurt such a printer detail as Duza. If the dose is contacted with contaminated fluid on the tissue, this is fraught with their blockage.
What to do next:
- With a clean cloth or gauze, carefully remove the rubber bands from the inkwell.
- Heat the cleansing printer fluid to 55 degrees
- Put a rag under the printer head
- Pick the liquid in a special syringe (sold in a set)
- Apply a liquid to such a detail as "fence shiddersers."
- You need to clean until the spots of paint cease to appear on the fabric.
Daily printer cleaning: what is it?
Do I need to clean the printer every day? It is not necessary at all, but what can not be done is to leave the printer without work for a long time. If this happened and the printer did not print for several weeks - immediately start the cleaning program through the software.
Perform all the proposed purification levels:
- Cartridges
- Ribbon
- Rollers
- Nozzles
And then proceed to print a bright picture to make sure that everything went well and the car prints properly.
How to clean a laser printer?
You can clean the printer yourself not only jet, but also laser.
You will need:
- Cotton sponges and sticks (without piles)
- Office paper
- A rag is dry
- Dry thick artistic brush
Important: to clean the printer in a room with closed windows, turned off the fan or air conditioning, as well as necessarily in a protective mask. Put on rubber or latex gloves.
How to clean:
- Disconnect the car from the network
- Expand the printer
- Remove the cartridge with toner
- Stretch the “fabric” tape under the toner, pulling it in different directions.
- Wipe the surface of the cartridge with a clean cloth
- A small nozzle on the vacuum cleaner collect all the dust from the cartridge and other internal parts of the printer.
- Gently clean all the internal compartments and gaps of the printer from dust with a dry brush.
- Collect the printer and run the seal
How to clean a dust printer?
Frequent cleaning of the printer from dust will allow the device to work properly without breakdowns and difficulties.
What to do:
- Deange the car
- Remove the lid (open)
- Gently, with a dry cotton sponge or a stick, wipe the paper video.
- Remove the cartridge, be sure to gently wipe it without turning it over (the paint should not spill). Also, in no case do you leave the cartridge under the direct rays of ultraviolet radiation.
Important: you can also wipe the printer inside with a special cleaning liquid that is sold in stores (where printers are sold, for them, paint and cartridges).