How to draw a tank for a child? How to draw an E-100 tank, tiger, IS-7 with a pencil?

How to draw different models of tanks.

Both a small and an adult artist will sooner or later decide to draw heavy equipment. The result will depend on whether it will be possible to highlight the main details and ignore unnecessary little things.

The article gives detailed instructions on how to draw the most popular tanks with a simple pencil.

How to draw an E100 tank with a pencil in stages for beginners and children?

This section presents a complete drawing scheme of such elements of heavy military equipment as caterpillars, towers, and other details. Having found out how to draw individual elements, you can easily transfer the image of any tank to the paper.

We draw the E100 tank with a simple pencil:

The E100 tank is massive and strong. It will not be difficult to depict it on a sheet of paper if you follow the description below:

• Turn the sheet horizontally. In the lower part of the sheet, we depict a parallelogram - the tank body, we draw a trapezoidal tower on the top on the housing.
• We go to the upper part of the tower: draw a hatch, the hoops of the gun. We depict a wide cylindrical base of the gun and the gun itself.
• Below, right under the base, draw over the entire length of the horizontal oval. These will be the caterpillars of the E100 tank.
• We draw four wheels inside an elongated oval - the first row of the wheels of the caterpillar. The second row of four wheels seemed first blocked.
• It remains only to draw small details of the tank. We draw the hoops and pins of the wheels. If you look closely at the scheme, you can improve the picture of the tank.

Video instruction will also help to portray the E100 tank on paper.

Video: How to draw an E100 tank?

How to draw a tiger tank with a pencil in stages?

We draw a tiger tank with a simple pencil:

• Let's start with the marking of the sheet. We will draw restrictive lines inside which we will draw a tank. After that, in the lower half of the sheet we draw a parallelepiped.

• On top of the “completes” the tank tower, reminiscent of the same parallelepiped, elongated horizontally.

• We depict the armored skirt of the caterpillar: for this you need to step back a little from the upper edge of the case and draw a figure that resembles in shape two paired rectangles, very elongated horizontally.

• We depict the lower part of the tank: the contours of the caterpillars, additional lines on the tank body.

• We draw a rectangle by installing it above the case. It will be the tank tower. We show the volume of the tower with additional lines and draw the protruding upper part of the hatch.

• We depict short lines in the front, and strokes of the middle part of the caterpillar tape.

• Let's work on the caterpillar of the tank: we draw four large circles located at the same distance, and one semicircle in the parts of the caterpillars protruding upward. Behind the first row of wheels we draw the protruding parts of the second row.

• To the front wall of the tower, add an oval cut on one side, a continuation of which is a long barrel.

• At this stage, you can add the missing details: a small rectangle on the case is a spare hatch and a figure resembling a semicircle, from which we will then draw a small gun.

• Now you can finish the caterpillar, lacking semicircular lines on wheels.

The drawn sketch of the tank can be decorated with dark green, brown flowers.

Let's try to portray the German tag tiger differently. It will simplify the task for us that this tank is a rectangular shape. However, for a realistic picture, it is necessary to draw many small details that have a difficult shape. But we strive to beautifully portray heavy equipment!

• We plan on a sheet straight lines (without pressure on a pencil), where the tank will be located. We start with the top of the tank. We draw the commander's hatch. To do this, draw a small oval, then loops and a lid.

• Detail the base of the hatch. We draw a fan cap next to him: a small oval - the upper part, small rectangles - lenses.

• Now you can portray the roof of the tower itself: the rounded back gradually goes into the trapezoid.

• There is another hatch and a loading periscope on the tower cover. We portray them with the help of simple geometric shapes, giving them the desired shape. We draw a line through the trapezoid, which will show the bevel of the front of the roof of the tower.

• We draw the visible part of the side of the tower with two curved lines. And prepare for a more difficult task.

• So, let's start the image of a mask of 88 millimeter guns. We draw a large rectangle, in the center of which we will enter two more, rounding the edges. The connecting lines give the desired shape the gun mask. In the central part of the mask we will draw a gun, but for now, we will portray on the left a small rectangle elongated vertically. Here we will later draw an embrasure of a machine gun spawned with a gun.

• We draw the base of the gun: these are two cylinders of different thicknesses that enter each other. The cylinder with wide walls is located at the base of the tower, and with thin ones is a continuation of the wide.

• We draw the remaining part of the gun - a thinner cylinder. We draw a muzzle brake: two cylindrical figures that are connected by a protruding circle.

• Add the missing elements of the tower: the oily point on the gun mask is an amzuras of a spared machine gun. We draw a mask on the right side, showing a monocular sight there. We show the surveillance device in several lines and the roam. We draw a box for equipment: three trapezes located in a semicircle in the shape of a tower.

• We depict the roof of the tank body in the form of a rectangle.

• With straight lines, show the on -board armor sheets. Below under the gun we draw the observation device of the driver mechanic. To make this part of the tank, draw simple figures, giving them the desired shape.

• Nadbusenic shelves give the shape of rectangles. Add the missing lines, checking with the picture.

• We draw a motor compartment and periscope, also giving them simple geometric shapes.

• In small ovals under the gun, we depict the hatches of the driver and the radio operator under the gun.

• We draw small details: machine gun, headlights, cables.

• We go to the running tank. We depict the caterpillars. We draw the lower frontal part, elements of the drive and guide wheels.

• We depict partially supporting rollers on the caterpillar.

• We draw four support rinks. The remaining two pairs of support rollers are outside the visibility zone due to a chess location.

• We depict the last elements of the tank: cables, hooks on the roof of the case, show with curved lines the relief of the support rollers.

• Now you can decorate the tank and add landscape elements: road, mountain or another tank in the distance.

The tank can be drawn in another angle. For example, like this:

• We outline the initial contours of the tank. Here you need to take into account the inclination of the case and the tower, as well as correctly depict the gun. If you can’t draw straight lines, then arm yourself with a ruler.

• Let's work on the exact image of the tank tower, finishing some details.

• Detail the gun and go to the upper part of the tank body.

• We draw an armored tank skirt.

• We proceed to the drawing of the lower part of the tank: caterpillar, optical device.

• We draw the visible part of the caterpillar.

We draw a track track: wheels located in a checkerboard pattern.

Video: How to draw a tiger tank?

Let's try to portray another enemy super -heavy mouse tank.

Here's what we will draw:

• We draw the top of the tower and draw additional lines from it to show the volume. We plan a few lines. On the right side of the tower, which we portrayed under a slight inclination, we draw a small hole.

• We draw wide bases for a gun and a machine gun. Immediately draw a short muzzle of a machine gun.

• Add the missing details on the base of the gun and draw a long barrel. We coped with the main weapons of the tank!

• The tank tank is “installed” on the tank housing, depicting it in the form of a rectangle under a small slope. We also draw the frontal armored system of the tank under the slope.

• We depict the visible part of the caterpillar in the form of an elongated horizontal oval and add massive screens to them. We draw towing rings.

• We depict headlights and seams on the tank armor. Add a few lines to the screens.
• The tank housing crosses the horizontal line. We depict it, stepping a little from the midline.

• We will finish the contours of the caterpillar screen.

• Detail the tank body, adding the missing elements.

• With several lines, we plan a cooling system. Add the lines on the case again.
• Add three hatches on top of the tower.

• Add the seams on the tower and on the tank body.

Video: How to draw a tank Mouse?

Video: How to draw Maus?

How can I easily and beautifully draw a IS-7 pencil?

We draw the tank IS-7:

• Having slightly retreated from the midline of the sheet, we will draw a segment, which will become the common side of the two rectangles.

• We portray these two rectangles. We draw lines crossing the drawn rectangles slightly higher than the midline. It will be the contour of the caterpillars. We draw them in more detail.

• Above the body of the tank we “cover” the tower. We give her the form of a trapezoid. Curled with curved lines show the contour of the tower and draw a gun barrel. Add a few lines on the caterpillars and mark the places where the wheels will be with crosses.

• We draw the first row of four wheels, and behind them we have a second row. We draw the necessary elements on the tower, on the gun and on the case.

• We complement the pattern with a pencil with a hatching and painted up separate areas on the tank.

  

Video: how to draw IS-7

Drawings of the tank with a pencil for children for sketching on February 23 and May 9 Victory Day

It is difficult for a child to draw a tank without the help of an adult. Simple images of tanks are useful for this without drawing small details. Look for a suitable drawing, for which there are no special artistic skills, and you can conduct a fascinating lesson in the study and drawing of heavy military equipment with your child.

To correctly depict a tank, pay attention to the following:

• Driving the technique must be monitored by the curvature lines and their direction.
• All lines are applied without pressure on a pencil, then erroneous strokes made can be easily removed without leaving traces on paper.
• Any irregular lines should be removed immediately so that they do not affect the final result.
• Starting to draw a complex object, it is necessary to give it a simple geometric shape, and only then begin to draw the details.

To prevent the tank does not seem flat, it is necessary to give the details the volume using hatching or additional lines.

The tank drawing schemes presented below will help draw a beautiful postcard or decorate the festive wall newspaper dedicated to February 23 or May 9.

Drawings of tanks for sketching:

 

 

How to draw a cartoon tank?

• To draw a fantasy tank, it is also necessary to take into account that this is a complex vehicle, because the drawing of small additional details cannot be avoided. After all, the image of even a cartoon tank should be recognizable.
• The drawing of a fantasy character resembling a tank will decorate a congratulatory card, collage or wall newspaper, prepared for the holiday on February 23, May 9. You can give a picture with a cheerful tank a lover of the computer game "Tanks online".

The tank can be portrayed “animated”: make it a friendly character or give a serious look.

Video: how to draw a tank: drawing lesson for children from 3 years old

Video: how to draw a tank - drawing lesson for children from 4 years old, pastel, draw at home in stages