How to measure, determine and find out the size of the ring: methods, tables, tips

In this topic, we will talk about how to find out the size of the ring.

Content

Sometimes buying such a decoration requires some knowledge. Especially if it is planned to purchase goods through the site. In principle, you need to know the millimeter measurements of the finger. And, it would seem that it could be easier than to measure the diameter of the finger.

But in this matter, difficulties may arise, especially if this finger is not yours. Of course, you can ask, but then there will be no surprise. Therefore, inventive people came up with several effective ways how to find out the size of the ring.

How to measure and find out the size of the ring?

But first, we limit what standard sizes that are common in jewelry stores are generally. A standard measure for women is considered from 16 to 19 mm, for men - from 19 to 24 mm. The dimensions of the ring extending beyond these limits are considered non -standard and are made to order after removing measures. Or are already being driven after the acquisition.

Important: if you still doubt the choice or are between two values, then give preference to more dimensions. But it is about millimeter differences. After all, your fingers will sometimes swell. And also, according to jewelers - a large ring is easier to narrow than expand.

If you want to purchase a jewelry for yourself, but simply do not know the size, then it is best Visit the nearest jewelry store, where there is definitely in stock Ralker. This is the easiest way to find out exactly which ring you need. At the same time, you will also receive a consultation on the design of the jewelry. After all, the shape of the product and its thickness also affects the proper circle.
You can use the special stencil ruler.The principle of its work is extremely clear - cut out, put on your finger, while tightening the tail to the desired mark. The only thing - do not do it too tight. After all, the ring should not pull the finger. And another advice - the stencil should be precise, up to a millimeter.

We resort to the help of the old jewelry to find out the size of the ring

It is also a fairly simple method. Since almost each of us has at least one ring. But such an option is suitable if you do not make a surprise to your loved one or have the opportunity to imperceptibly take the decoration. It should also be understood that the new acquisition will also be on this finger, from which the previous ring was removed.

School knowledge in geometry will be useful to you in this matter. We recall the theory that the size is easily changed on a redone circle.But we emphasize that we draw in the inner diameter. After all, the thickness of the ring will give exactly such an error, which will be equal to these millimeters. Then just apply a ruler or segment of the marking paper and with maximum accuracy we count the mark.
An even more accurate result will be if you have calipers.They also measure the inner diameter of the product. At the same time, it is not necessary to even redraw the circle, because you can do everything directly by decoration.
As a quick option - it's just put the line to the ring And calculate millimeter marks on the ruler. But again on the inner bend.
The same scheme works just Drawing a finger on paper.The distance will be equal to the desired value of the ring.

How to quickly and accurately measure the size

Determine the size of the ring around the finger of the finger: methods, tables

IMPORTANT: Drive up the rounding!

The second method also requires knowledge of geometry. We start with it, because this method makes it possible to calculate the size for any phalanx of the finger. After all, the rings are worn at different heights. To the right place wind a thread or a small tape of 0.3-0.5 cm, So that it freely gripping the finger. Just make the ends crosswise or connect them tightly by marking on the segment. We translate or immediately write the circle in millimeters, and at the end we divide the result by the number 3.14.
- You should get a size, which is equal to the diameter of the internal walls of the ring. For example, the circle of your finger is 53 cm. When dividing by 3.14, 16.87 comes out. We look at the table and find the most close, but a larger number - in our case it is 17 size.
- By the way, with a simple measurement of the walls of the ring, we also received about 17 mm. Hundredths are not necessary to take into account. But for comparison, the width of the ring itself is also 16.8 mm. Therefore, the results of two methods coincide!

There is a more complicated scheme that works Based on a thin thread. But this method gives more accurate measurements! Hurry around your finger 5 times and tightly pull the ends. It is a little inconvenient to work independently, but possible. And make a manual marker mark or immediately cut off the ends of the thread, you can simply hold the junction of the joint with a fingernail. Now we also measure this long segment, but We divide by 15.7!
- Example: In our case, these turns turned out to be 26.7 cm, which is 267 mm. Divide by 15.7 and we get the same 17!

Five revolutions will give a more accurate result

The usual piece of paper also has about 1-1.5 cm. As shown in the photo below, it also applies: they turned out, connected close ends and put the mark with the pen. Next, do the above scheme. Or you act even easier - just transfer millimeters to the size using the table. Moreover, it is easier to work on your own with paper, because it is easier to mark it.

We also offer the size of the rings for different countries

And how will the size of the clothing help set the size of the ring?

The approximate and far from accurate size can be determined by the number of clothes that a person wears, as well as by his weight and height. But do not forget that each finger will have its own circle. Although in the case of error you can simply change the selected finger.

Statistical data say:

for the size of the clothing S, rings 15.5-16.5 are suitable;
for M corresponds to 16.5-17.5;
the size of the jewelry for L varies from 17.5-18.5;
and for XL from 18.5 to 19.5;
a further increase in size is with a serial increase per unit.

Therefore, it is worth noting another very approximate rule:

with a weight of up to 60 kg and growth up to 170 cm correspond to the size of the rings 16.0-17.5;
above 170 cm and harder 60 kg are 18.0-19.5;
but more than 80 kg is already 18.5-20.5;
the weight for 85 kg requires already 21 sizes or more.

We measure the size of the ring correctly: tips

It is better to measure a finger in the middle of the day, so As in the morning after sleep or in the evening after any daytime physical activity, the hands swell a little, and the dimensions will come out incorrect.
The weather also affects. Our bodies are also amenable to the laws of physics, therefore, in the warm time, the fingers expand slightly, and with cold - become thinner. When buying, be guided by average indicators.
For the same reason, it falls under the taboo The period of illness or critical days.
And, of course, After abundant drinking or trainingrefrain from measuring to buy a ring.
Consider the width of the ring! As a rule, wide and densely adjacent products are slightly small, so take half a sizes more than half the size. But thin rings are better, on the contrary, to take either in size, or by 0.5 sizes smaller. The same applies to voluminous rings.