How to get rid of the slit between the bathroom and the wall: the most effective and proven methods

In this article, we will consider the most effective methods to eliminate the cracks between the bathroom and the wall.

Repair in the bathroom is known to every owner of an apartment or home. The most important element of the room is the bath, the installation of which carries the responsible stage. A small gap between the bathroom and the wall can incur large undesirable outcomes. Therefore, we suggest you look at the most effective methods for setting up this gap near the bathroom to find the best option for yourself.

How to get rid of the slit between the bathroom and the wall: the most effective and proven methods

Even a small gap between the bathroom and the wall, but it leads to the pernicious condition of the room. The bathroom is characterized by constant humidity. If an extra gap remains in the gap and the walls, then sooner or later water will get in secluded places. And it will happen constantly. As a result, it will begin to be smashed with damp, mold will appear, and constant puddles will stand under the bathroom itself.

• There are simple and inexpensive options for sealing seams. But they all do not do without a preparatory stage. First, it is necessary to remove mold between the surface of the wall and the bath, the remnants of the repair and large pollution, including the remains of the paint, if any.
• The surface released from extraneous pollution is subjected to washing and thorough drying. In order to avoid the development of the fungus, spray the entire area with an antifungal agent.
• With a large gap, the correct option would be the attachment of a bar or a metal profile between the wall and the bathroom. Any of these options will be for finishing material a durable and strong basis.

Good old cement will help to close the gap between the bathroom and the wall

• One of the first materials for gluing the seams is cement. This method is also considered the most budgetary, and the quality of the material is valued by its strength and moisture resistance.
• The cement solution is used in such proportions: 3 parts of sand and 1 part of the cement. For the elasticity of materials, PVA glue is added as an auxiliary element. The density of the finished solution should resemble the consistency of thick fat sour cream. Therefore, pour the amount of glue in portions and mix the mass well.
• With the help of a spatula, the resulting mixture is covered with a gap, pressing it over the entire scale of the gap. Since the solution has a quick coup, it is recommended to level the surface of the surface to the ideality in the very process of work.
• Keep in mind that such a solution is suitable for cracks between the bathroom and a wall of not more than 3-4 cm. Otherwise, it is necessary to fix the bar, otherwise the mass will simply fail.
• Also, be prepared that the cement mixture will dry at least 24 hours. And if the layer is thick, then more than 72. During this period, water is prohibited.
• From the shortcomings It is worth highlighting the cracking of dry material. Therefore, it will need to be previously covered with a plastic bar or persistent paint. Moreover, the wider the gap, the faster the seam spoil. More suitable as the basis for other means. Moreover, it is more convenient to use it until tile laying.

Flash the gap between the bathroom and the wall will quickly and simply help mounting foam

• This method is super -suffering and insanely simple. But keep in mind that only moisture -resistant foam needs to be used, and finely porous material is good for these purposes.
• The gap is allowed up to 8 cm, but it will be necessary to work with it in stages. The ideal solution, especially for beginners, is 1-3 cm.
• The balloon must be well shaken and walk around the entire perimeter of the bathroom. After filling the gap with foam, it is necessary to withstand the period of time up to 8 hours.
• Upon completion of the excess material, remove the excess material with a knife or a sharp blade. In order to avoid the non -loading surface, then put a layer of plumbing silicone or any other decorated layer further.
• This is hidden flawthat the seam needs to be hidden. Also, you need to work very carefully with foam, because its remains on the tiles are painfully laundered. Or seal the desired area with special construction tape.

Silicone -based sealant is perfect for setting cracks between the bathroom and the wall

• When choosing silicone, you need to pay attention to its type:
  • the first view includes a sanitary sealant, which is distinguished by its strength to dampness and mold;
  • next is a less expensive "sour" silicone. The smell has vinegar, hence the name. It is preferable to do the sealing of a ceramic and tin bath;
  • the third type of silicone is a neutral option. It is used in the case of an installed acrylic bathtub or shower with PVC.
• They are in tubes and tubes. But a pistol is widely used to apply sealant, which is much more convenient. And to make the seam even, it is adjusted with a spatula that is wetted in a soap solution. It is also undesirable to tear off the line during work.
• But do not forget to first degrease the surface. Otherwise, the sealant will move very quickly. And all the excess must be removed immediately. Since after drying even a slight strip can pull the entire seam.
• In general, this pulling substance is well removed after drying, but you need to carefully cut off the excess so as not to pull the entire coating. It is also removed easily around the entire perimeter. That's what it is the main minus - After all, when using you need to be neat.

A pair with a sealant to close the gap between the bathroom and the wall will help a plastic corner

• He is more bends decorative value. The corner closes the cracks up to 3 cm wide. But such a plinth is attached exclusively on the silicone of any color. The corner itself will not close the gap, and the water through it will seep.
• The sealant is applied to the gap itself and to the surface of the corner. After that tightly press, and after completely drying out, carefully remove the excess. By the way, do not forget to first fit the necessary dimensions and choose the appropriate color.

A more decorative option for setting the cracks between the bathroom and the wall - grout

• The next possible material to eliminate the gap is the grout that is used to fill the tile joints.
• To light a good assistant will be a rubber spatula. It is applied with a thick consistency, as well as such a material. It takes about a day to dry out.
• By the way, it can be selected the desired color, or rather, use the same grout as during the repair.
• The grout is popular with its moisture resistance, which means that it has great protection against dampness, mold and fungus. But she only fits for millimeter cracks Or to cover after a seam from foam or sealant.

The modern method of closing the gap between the bathroom and the wall is the curb flexible Lena

• The method is so simple that even a child will cope with it. This plastic strip has an adhesive base. Its use involves degreasing the working surface. Having previously determined the length of the tape, it is attached with a slight pressure in the place of the gap.
• For a greater guarantee, you can walk with silicone along the seam itself. It will take more time, but in the end it will last longer. Removing the remaining glue is very problematic. The most effective method is White Spirit. Also note that the protective film must be removed gradually, in the fact of gluing to the surface.
• Also be prepared to periodic replacement of the tape. After all, its term is about 1-2 years. After that, she will lose her attractive appearance. And with a slight press on the tape, the glue will crawl to the surface. And already all the dirt and dust will stick on it. That's why general cleaning ribbons It will be necessary to do regularly.

Capital struggle between the bathroom and the wall will be tiles

• In order not to puzzle over her choice for a long time, it is better to use the remains of the tiles that were laid on the wall. If there is no one, take a white or beige tile without unnecessary patterns. This will support the classic style of the bathroom. Tiles are attached with waterproof glue or liquid nails.
• There are also special ceramic corners that are a wound of size. They will also help to close the gap between the bathroom and the wall, and even the scenery will add to the bathroom. But first you need to go through the gap with a sealant or to close the desired ledge with a solution of cement.
• Such elements as all the rest of the tile in the bathroom are laid. Moreover, it is necessary to use it properly, and use the grout. That's why this method cannot be called the easiest.

Glabel in the fight against the gap between the bathroom and the wall

• Construction technology went ahead. There is a modern material - a filler. This, a kind, is an outer corner for tiles, which consists of foamed foam or PVC.
• The versatility of such a material is that it does not miss and absorbs moisture by 100 %. There is another type of filler consisting of polyurethane. It is improved, as it is more durable and has plasticity.
• This type of corner prevents the ingress of water and steam under the bath, avoiding the growth of the fungus. But there is one nuance - a filler is used paired with a sealant. First, finishing material is used, and on top they are already covered with a corner as a decorative function.
• But when compared with the previous option, then it is definitely more convenient. It is also sometimes called a battleship for the bathroom.
• As in previous methods of getting rid of the gap, this method requires cleaning, drying and degreasing the surface, which lends itself to sealing. Also, keep in mind that such a corner needs to be pressed against the wall for 5 minutes until silicone grabs.
• And the joints between the corners will need to be treated once again with a sealant, only this time already transparent. Or go through the same grout of the right color.

Important: for the greatest effect, it does not prevent the use of triple protection against sucking moisture. That is, apply the installation foam or cement mortar, after drying, pass everywhere with a sealant, and on top for a beautiful common picture you close everything in the outer corner.

Whatever the method you use, take into account the essence of the covers of the cracks. In the first place should be the goal of water resistance, and the secondary one is an aesthetic form of your work.

Video: The most sensible ways how to close the gap between the bathroom and the wall