How and how to insulate the metal front door? DIY AT WARRISTION OF A METAL OF THE METAL OF AND INTERESTS: Ideas, Methods, Tips

Instructions for insulation of the front door.

Quite often, residents of private houses who installed new fashionable beautiful doors are quickly disappointed in their functionality. Since in most cases such gates freeze. As a result of this, condensation is formed, as well as the fungus on the walls at the entrance. In this case, it is necessary to shift the dew point on the insulation of the front door. In this article we will tell you how to do it.

DIY AT WARRISTION OF A METAL OF THE METAL OF AND INTERESTS: Ideas, Methods, Tips

To begin with, you should see how your doors are designed. If you purchased the gate in the middle price category, then it will not be difficult to disassemble the door leaf. Remove the outer part, as a result, you will receive the inside, which is a canvas with stiffeners. But it happens, especially this happens when disassembling cheap Chinese doors, that there are no stiffness ribs inside. At the same time, the door itself is indifferent. You will have to welcome stiffness ribs yourself. This is done using welding and a metal corner. Wooden bars are already attached directly to these corners, then the doors are filled with thermal insulation material.

Now we need to choose a heater. Anyone is suitable for the apartment, for a private house you need to make a conscious choice. The most ideal and good option will be polyurethane foam. But such a content is quite expensive. But if you can afford it, then this will solve all the problems with freezing doors. In this case, you will have to call the team that will perform the filling.

Insulation:

• Foam polystyrene
• Styrofoam
• Mineral wool
• Glass wool
• Poliuretan foam

If you dismantled the doors and found stiffness inside the rib, then everything is fine, you can proceed to work.

Instructions:

• On the perimeter of the entire wings, you need to install wooden bars using screws. This will become a kind of frame for insulation. Try to install these bars not only horizontally and vertically, but in different order. Because the thermal insulation material in some cases has the ability to compress, fall, and also deform.
• Therefore, so that the thermal insulation material does not slide down, it must be divided into sections. Next, you need to deal with the insulation. As a thermal insulation material, polystyrene foam, as well as polyurethane foam can be used. Mineral or glass wool is often used.
• Please note that the installation of glass wool in the front door in a private cottage is undesirable. Because even when installing an insulating film, mineral wool can get wet, which will cause freezing freezing, as well as additional cooling of the door. If you are in the apartment, then you have a lot of insulation options.
• After you installed the frame, you can start installing thermal insulation material. If it is a foam, it is necessary to cut it into pieces and attach it with liquid nails. Mineral wool is laid by cutting by parts and cavity stuffing that remained in the installation of a wooden beam.
• Before installing mineral wool, it is imperative to put a film in these voids, which then turns the mineral wool and is sealed with tape. Thus, thermal insulation materials are packed in a cocoon. It is such a cocoon that will impede the accumulation of moisture in mineral wool.
• After all work on laying and gluing thermal insulation materials is completed, you can install the second part of the door leaf in place. If it was a Chinese indiscriminate door, in which case you will have to nail wooden rails, laminate or sheets of chipboard to the wooden beam around the perimeter of the door.

How and how to properly insulate the old and new entrance metal, the door from the inside in a private house with your own hands?

The most optimal option for insulation of doors in a private house is the use of polystyrene or polystyrene foam. Since the second option is expensive and requires a specialist to call a house, you can use polystyrene. This is a cheap material that has a high thermal insulation ability and will prevent the freezing of the doors.

Instructions:

• Divide the door into two parts. Inside you will see cavities and stiffeners that are cooked from a metal corner. Along the perimeter of all doors, you need to fix the wooden bars. This is done using hardware or screws.
• After that, chopped foam leaves are installed in the cavity between the wooden frame. When all parts of the door are completely insulated, it is necessary to fix the removed part of the sash and fix it. If the door turned out to be indifferent and there is no way to install the removed part of the door leaf, then you will have to overtake the door from the inside of the chipboard or moisture -resistant laminate.
• In a private house, such thermal insulation materials are not used, because they can soak and pour moisture. In this case, plastic will be an ideal option for upholstery. It is glued to liquid nails on a frame of bars.
• On the perimeter, the doors are attached to self -tapping screws. Further, in the places of self -tapping screws, an adhesive plastic corner is attached. It will help to hide traces from self -tapping screws, their hats.

How and what to properly insulate the front iron door outside with your own hands?

If this is the front door in a private house, then it is rarely insulated from the outside, because almost all heaters can soak under the influence of moisture. It is not known how they will react to a decrease in temperature. The insulation must be protected from the effects of atmospheric precipitation. If the door is in the entrance, that is, at the entrance to the apartment, in principle it can be insulated outside.

Most often, this is done not only for the purpose of insulation, but also for the purpose of soundproofing. This option is suitable if you do not want to disassemble your door leaf, and are not sure that it is collapsible. In this case, it is necessary to paste the surface of the doors with a special insulation that reflects light and heat. Such materials are sold in rolls and are quite cheap. They are attached to ordinary liquid nails. After that, the doors are decorated or upholstered with dermantine or wooden rails.

This is a great option if there is an old door that is cooked among yourself, and you do not want to disassemble it. Such a door can be insulated with a very unusual and interesting way. In the upper part of the doors, several holes are drilled, which are then filled with foam balls. This method is not suitable if you have a crossbar and foam balls can fall into the mechanism and will contribute to a breakdown.

As you can see, there are a lot of materials for insulation of the front door, both outside and inside. Choose a variant of insulation depending on whether you live in a private house, or in an apartment.

Video: Insulation of the front door