How and how to wash white plastic on the windows after repair, from adhesive tape, labels, super glue, moment, yellow plaque, permanent marker, felt -tip pen, plasticine, paints, raids from water, soot, soot, fat, greens, rust? How and what to whiten yellowed plastic?

Ways to wash white plastic.

Plastic is a common finishing material that is used in construction. It is often used for decoration of balconies and bathrooms. Such material is convenient to wash, and it is quite resistant to various influences.

How and how to wash white plastic on the windows from construction, bilateral, ordinary adhesive tape?

It is worth noting that bilateral tape sticks due to the presence of adhesive mass on its surface. Therefore, your task is to dissolve glue. This can be done using an organic solvent.

Ways to remove the remaining glue from tape from plastic:

• Oil. In this case, sunflower oil is used. They moisten a cotton pad and wipe the pollution. After that, the bold shine is washed off with warm water with soap.
• White spirt. This is a solvent that is often removed paint. It is necessary to moisten the fabric and wipe the pollution.
• Feng. It is necessary to heat the glue with hot air and gently wipe it with the hard part of the kitchen sponge.
• Eraser. An ordinary grout is taken and the remains of glue are wiped.

How and how to wash white plastic on the windows from sealant, mounting foam?

The mounting foam sticks quite strongly to the surfaces of plastic. But it is not necessary to scrape it with a knife. With the right approach, you can remove the remaining foam in a few minutes.

Foam removal products:

• Solvent. Apply any solvent to the foam and wait 15 minutes. Remove the remaining foam with the hard side of the sponge.
• Hot oil. Warm 100 ml of sunflower oil in a saucepan and soak it fabric. Wipe the surface thoroughly.
• Vinegar. It is advisable to chip the most part with a knife, trying not to hurt the surface of the window. After that, vinegar is applied to the sponge, and the remaining foam is removed. It is worth considering that you need to rub the felt part of the sponge.
• Dimexide. A rather strange remedy that works. It is necessary to moisten cotton pads in it and leave on a dirty surface. You need to wait 15-20 minutes. After that, rub the surface thoroughly.

How and how to wash white plastic on the windows from water -based, acrylic paint?

Such paint is quite well washed with water. But in order to facilitate the process and accelerate it, moisten the windows with water from the sprayer and wait. After that, rub the hard side of the kitchen sponge. Do not use abrasive powders.

How and how to wash white plastic on the windows from a construction putty?

The plaster is gypsum, cement or lime. Regardless of the composition, it is laundered from a plastic profile with a damp cloth. If she managed to dry, then a dry rag or spatula is used, depending on the degree of pollution. In order not to scratch plastic, the sharp edge of the spatula is wrapped in a rag and cleaned pieces of plaster, cutting it at the profile itself.

How and what to wash white plastic on the windows from the label?

Very often, after installing plastic windows, a sticky tape remains on them. It prevents plastic from scratches and other construction debris.

Removal options:

• If after its removal there are sticky traces, then try to remove the White with alcohol.
• Pieces of adhesive tape can be removed with tape. You need to stick a new tape to the places of pollution and press to them. After that, tear off the tape. Pollution will remain on it.
• If there are printed inscriptions, remove them with a dishwasher.

How and how to wash white plastic on the windows from super glue, glue moment?

Often, after repair on plastic, traces of glue remain. To remove them, use the following substances:

• Anticles
• Petrol
• Kerosene
• Dimexide
• Winding

Swell the fabric with any means and rub the pollution.

How and what to wipe on plastic windows permanent marker, felt -tip pen?

Often, masters mark plastic windows with markers. For many people, it becomes difficult to remove the marker, but in fact it is easy to remove it.

Options:

• Hair spray
• Medical alcohol
• Remedy for cleaning marker boards
• Varnish removal

How and how to whiten yellowed plastic of the windowsill, wipe the yellow plaque, stuck yellow spots?

This happens if the plastic is old enough. But you should not be upset, this is nothing but a plaque. The dirt was not eaten into plastic and you can remove it.

Cleaning tools:

• Hydrogen peroxide
• Medical alcohol
• Plastic cleaning products
• Bleach with chlorine

It is necessary to soak the tissue with one of the liquids and rub the pollution. After that, a standard plastic washing is carried out using soapy solution.

How and how to wash white plastic on the windows from the plaque from the water?

If there is a drain near your window, then, most likely, the windows will eventually be covered with rust and lime coating. It is worth noting that it is impossible to remove such pollution with acids, from this the structure of plastic is destroyed. For this purpose, washing powder is used. It is applied for 15 minutes and moistened. After that, washing water. You can also use special plastic cleaners.

How and how to wash white plastic on the windows from soot and soot?

To begin with, soot is removed using a conventional dry cloth. Just rubbing the soot to the surface is not worth it. After that, the window is washed with Flyeri dishwashing liquid or a sea remedy.

How and how to wash white plastic on the windows from the plaque from fat?

This often happens with plastic on the windows in the kitchen. Despite the presence of an extract, soot settles on the frames. It is not easy to remove it at all.

Fat purification products:

• Hydrogen peroxide
• White
• Glass

How and how to wash white plastic on the windows from the plaque from rust?

To do this, it is better to use special tools:

• Universal Proper
• Cillit Bang
• Sanita for the kitchen
• Pemolux
• Cosmofen 10

How and how to wash white plastic on the windows from the plaque from the green?

Zelenka is aniline dye, which is strongly eaten into the surface. You can delete the stain with some means.

Options:

• Alcohol
• Glass
• Nail polish remover
• White alcohol
• Wet wipes

White plastic is quite flashed, so all kinds of pollution can remain on it to remove them, use our tips.

Video: Ways to wash plastic