Repair of inflatable beds and mattresses at home: methods and useful recommendations.
Content
- How to find a hole in an inflatable mattress: Ways
- Glue for repairing inflatable mattresses and beds: brand, names
- How and how to seal a hole on an inflatable mattress: recipe, instruction
- How and how to seal an inflatable mattress on the seam: recipe, instruction
- How and what to seal the inflatable mattress from the velor side, from the flock?
- How to seal the INTEX inflatable mattress: instruction
- Video: How to seal an inflatable mattress on the velor surface?
- Can an inflatable mattress, glue a superglue?
- Is it possible to seal an inflatable mattress in tire fitting?
- Instructions for the operation of an inflatable mattress and a warning against damage
- Video: how to seal the mattress (as easy as simple) ”Be sure to read the description for the video"
Inflatable mattresses or beds are easily transported, easy to care, have a small volume during storage in the collected form and a relatively inexpensive price. Thanks to these qualities, they are an indispensable thing when your friends or when traveling to rest, when living in tent conditions. Their only minus is that even the slightest damage, instantly eliminates the further operation of the mattress. How to repair an inflatable product yourself? How is it right to talk in this article.
How to find a hole in an inflatable mattress: Ways
Learning to search for a hole is a very difficult task. As a rule, they are scanty and noticing them with the naked eye problematic.
Some efforts and a little patience will help to find damage as quickly as possible, using the following search methods:
- Inspect the seams. Most often, it is at the junctions that mattresses are torn, due to their excessive inflating
- Next, proceed to the inspection of the surfaces
- If after a visual inspection it was not possible to find damage use the following methods:
Option 1
- Pump up the mattress to a possible limit
- Listen to the outgoing sound
- Help with a damp hand to determine the source of damage. We bring it to the source of the sound signal - the air should cold palm
- We mark the found hole with a marker
Option 2
- You can use it in nature, in the presence of a reservoir
- Plunge completely the product into the water
- Careful examination will find out the outgoing air bubbles
- Fix damage with chalk
3 option
- Apply soap foam using a spray gun to the estimated object of damage, with an inflated mattress
- Busted foam will accurately indicate a problematic place
4 option
- Mix liters five waters with liquid detergent for dishes
- Pour the liquid into the blown mattress
- Inflate the product and slightly shake it
- Through the available holes, soap foam will be actively out
- Mark leaks permanent marker
Precautionary measures:
- Do not put the mattress on sharp objects during examination.
- Do not pump up too much the product. This can provoke an explosion.
- Despite the presence of an effective way to check water inward, it has its negative consequences. In the future, it is problematic to dry the mattress - mold may appear.
- Pre -see the recommendation of the manufacturer. Perhaps your bed should not be wetted. In contact with water, the seams can lose strength, and this can also lead to detachment of the protective coating on synthetic tissues.
After detecting damage, you can proceed to the restoration of the product.
Glue for repairing inflatable mattresses and beds: brand, names
The following brands of glue are suitable for sealing mattresses:
- TGF (tetrahydrafuran)
- Uranus
- The moment was scrutiding
- Quelyd "Maxiglue"
- The moment is universal
- Desmol
- Nano Kleber
How and how to seal a hole on an inflatable mattress: recipe, instruction
Typically, a reptlet is sold along with the mattress.
In its absence, we stock up:
- Polyurethane glue
- Specially purchased patch or scrap of rubberized material
Main steps:
- Clean the damage zone with sandpaper
- Weak with alcohol solution
- We apply a bonding tool for a patch
- We press to the surface
- Leave under the press for 12-24 hours
- Then we remove the press
- Make a control check by inflating
How and how to seal an inflatable mattress on the seam: recipe, instruction
- The seam gluing on the mattress is made from the inside
- To do this, stretch the damage site through the valve and proceed to the repair similarly to the above
- After complete drying, turn the mattress into its original position
How and what to seal the inflatable mattress from the velor side, from the flock?
- Choose a flat hard surface
- We straighten the mattress
- Damaged place and several centimeters around it is treated with fluid liquid
- After a few minutes, remove the pile with a blunt knife
- We process for degreasing again with a solvent. It is better not to use sandpaper. This can lead to small cuts that provoke larger damage
- Next, we cut out the patch a few centimeters more than the hole. For this purpose, thin rubber, oilcloth, island are suitable for this purpose
- Wipe for degreasing solvent
- Lubricate the patch and surface with glue
- Dry 5 minutes
- We process with glue a second time
- We drive out accumulated air between the surface and the patch, leaving a cloth
- We put oppression for 12-30 hours
- Next, we use the mattress, trying to prevent additional damage
How to seal the INTEX inflatable mattress: instruction
- We blow the air out of the mattress
- We straighten the damaged area
- We clean the gluing section of pollution
- We degrease Toluol
- We apply any transparent material to the hole, circle the pattern of the patch
- Cut the pattern of 4 cm larger than damage
- We apply a small amount of glue on one and other surfaces
- We dry without applying on the mattress
- We smear the second time, dry 5 minutes
- Using the hair dryer, heat the glue to activate it
- We press the patch to the cut
- To avoid air residues, iron with a roller. Press the load
- We dry at least a day
Additional tips:
- Smooth part repair with a transparent vinyl film
- When forming a defect on the flock surface:
- First, clean the pile with a skin or rinse with alcohol - otherwise the patch will not stick
- Next, conduct the same manipulations as on the smooth side, but with a flock of flock
Video: How to seal an inflatable mattress on the velor surface?
Can an inflatable mattress, glue a superglue?
- Such glue is universal, since it glues almost all materials
- But not all varieties of superglide are suitable for sealing an inflatable mattress
- There are varieties that have a cycle base. They hardened very hard, which is not acceptable for the rubber product
- From this series of superglide, glue with a rubber base is suitable. After drying, he remains flexible
Is it possible to seal an inflatable mattress in tire fitting?
- In emergency cases, when there is no reprimatum at hand, you can use the services of tire fitting
- But then it is better to cross the patch, since still the mattresses glued in auto workshops look very rude and not aesthetically aesthetically pleasing
Instructions for the operation of an inflatable mattress and a warning against damage
Having renovated the product, try to avoid subsequently its further damage.
To do this, follow a few simple tips:
- Inspect the place where you plan to place an inflated mattress. If there are stitching items, delete them
- Avoid playing it with cats and dogs. Their sharp claws can violate the integrity
- Move the mattress on the surface carefully. Strong pulling can lead to the fact that the seams will disperse
One of the above methods will definitely help to identify a hole, make a qualitatively restoration of a bed or mattress. And proper use and precautions will help to use a practical and comfortable product for a long time.