Engineering board and parquet board: What is the difference, which is better?

In this topic, we will consider similar and distinctive features between the engineering and parquet board.

Starting overhaul or construction of a new house, the question of the preference of the flooring always arises. And if our choice stops on a parquet surface, which has recently enjoyed increased popularity, an additional dilemma also arises - an engineering or parquet board has great advantages. After all, the floor is the key to the reliability and strength of the entire home. Therefore, in today's material we will conduct this comparison.

What is the difference between an engineering and parquet board?

It became known about the engineering board not so long ago. But among modern high -quality flooring, it confidently conquers a leading position, competing with a long -known parquet material. Although many experts consider this not entirely justified, but, as practice has shown, its advantages are evident. Let's put an engineering and parquet board on the scales to find the winner.

What is a parquet board?

• The term itself is generally accepted and entrenched in many countries. Parquet boards have always been considered a quality and practical flooring. They are distinguished by an attractive appearance, multifunctionality and warm texture.
• But their main feature is that they are made of natural high -quality wood and consist of several layers of wood, firmly connected to each other. Their manufacturing technology is such that they acquire resistance to the temperature difference, are characterized by increased strength and a long expiration date.

• Although it should be said here that the last indicator depends on the quality of the tree and the thickness of the upper layer of the board. It is worth noting that parquet material It has several tiers But their number varies from 1 to 3 lamellas in the upper layer. The last option is more common, and even is in great demand. These tiers are glued together.
  • If we talk about the complexity of styling, then upper layer It is the most valuable and attractive. After all, it is pulled exclusively from noble materials according to the type of oak, nut or beech. Sometimes there may be a keyword in the amount of 1-2 mm. The upper tier itself does not exceed 4-5 mm, or even 0.6-2 mm.
  • Second, lower styling It has a perpendicular position of wooden segments. Its thickness is many times larger, that is, 8-10 mm. But breeds are chosen more often than coniferous class.
  • bottom layer It is always made of coniferous breeds so as not to weight the structure. In this case, there must be a continuous design, which is more often created by stabilizing veneer, with a thickness of not more than 1-2 mm.

Important: 7 layers of a protective UV-varnish or oil are always applied. It is this coating that creates a rich and reliable appearance that does not need additional processing.

• In the definition of their quality, selection matters - this is a high -quality selection of varieties of wood in texture and color, cut, processing and formation of a board. If earlier parquet boards were the same standard size, now they are available in a fairly wide assortment. There are dozens of options for every taste of the consumer.
• A few words about dimensions:
  • the width ranges from 14 to 20 cm;
  • the thickness is provided in the range of 14-17 cm;
  • and the length of the product can be selected from 1.8 to 2.5 m.
• Installation takes place using Castle fastening. That is, all boards are collected according to the type of puzzle, only according to a simple scheme. But you should take care About the vapor barrier and substrate, On which the material will be laid out. Truth, Each company is developing its own lock, which is not suitable for another manufacturer.
  • Glue styling on concrete is possible. But in this case, it is worth arming with the help of masters, since the maximum equal surface and identical gluing will be required.
  • It should be noted - with a locking connection, it is necessary without fail Observe the gap between the walls for installing the skirting board!
  • The calculation is also carried out strictly according to one scheme parallel with canvases.

What is an engineering board?

• This term is a purely Russian name, which covered the neighboring CIS countries. In many Western countries, it is considered a subspecies of parquet, or an improved laminate, or a rough option. Although the engineering board rightfully bears personal name.
• This material will also give us valuable rocks in the upper layer. In this case, it is usually used Whole lamella and complete lack of veneer! The thickness in this case is almost always in the order of 4-6.2 mm.
• The supporting layer, which also happens 2 or 3 tiers from plywood about 6-8 layers, which are laid out perpendicular to each other. In this case, the thickness can reach 14-15 mm. If we talk about the material, then almost all tiers come from valuable breeds, in particular from oak. The lower layer can sometimes be made from birch or eucalyptus. By the way, we do not forget about the health benefits of each wood.
• It is necessarily that a wear-resistant coating of UV-varnish or oil is going on. In the upper layer there are no gluing lanes of lamella! It is always single -lane and consists of a valuable wooden massif.

Important: all layers are interconnected by polyurethane glue! And this gives boards resistance to weather fluctuations and even high humidity.

• The dimensions of the engineering board are much more diverse and more than that of the parquet canvas. The average maximum, but not strictly determined, indicators:
  • width - about 30 cm, or you can order both 45 and 50 cm;
  • the thickness rarely covers below 20 cm;
  • the length of the product starts at 2.2 m, but again - to cut or ordering will no longer be difficult.
• As for the castle - It is universal with all manufacturers. Moreover, it can be laid with other floor materials. The connection occurs due to the pinch and the groove.
• But only you can’t put the engineering board with a keyboard - Only adhesive. Since it is based on plywood. Although the details are connected by a castle option. At the same time, her It can be fixed directly on the screed or self -tapping screws to the lower plywood sheet. If desired, when the floor insulation occurs, the substrate can be used.
  • For this reason, you can lay the canvases in parallel or perpendicular to each other, and even in the shape of a Christmas tree!

Which is better - engineering or parquet board: comparison

Since we brought and examined the main characteristics of each material separately, it is worth studying their main features to find the winner or put a draw.

But for starters, we will find similar features:

• both materials are a multilayer design;
• when installing, the boards are connected by means of locking elements;
• in the manufacture of surface processing and applying a protective layer, so immediately after the purchase they are ready for installation. That is, additional wood protection is not necessary;
• in the finished version, they are very similar on the floor, so they are often confused.

The main distinguishing features of two materials:

• When studying, we did not affect one of the main aspects - restoration. In this matter, engineering material definitely wins. Firstly, this is glue styling. The parquet canvas with a floating connection is forbidden to grind. This also applies if the upper layer has one sheet or thickness of 0.6 mm.
  • At the same time, manufacturers do not give a guarantee with frequent restoration-on average it is 1-3 times, depending on the thickness of the upper lamellas. Remember - The parquet board can only be processed with special machines without vibration. The engineering board is not afraid of the same and allows processing up to 7-10 times.

• This upper tier of 2-3 layers sometimes plays an angry joke. The fact is that for this reason The parquet board is afraid of temperature changes! After all, the appearance of chips, cracks or stratification is possible. We repeat that the engineering canvas is not afraid of high humidity and temperature difference.
• The stability of the coating is always on the side of the adhesive method.Moreover, the thickness of the engineering canvas allows you not to bother about additional flooring and can be mounted on a concrete base. Free laying of the parquet over time may begin to “walk”.
  • By the way, the adhesive method always provides additional sound insulation!
• The parquet board over time can also form the cracks, and with improper laying, these flaws are possible. The engineering canvas excludes such incidents!
• Wherein has significantly more installation methods, can be combined with other flooring, Since it has different thickness and universality of the castle.
• It is also worth noting that the engineering board is more durable and durable. Manufacturers guarantee about 40 years of operation. At the same time, the parquet canvas is 2 times smaller.
• Moreover, she also Do not need special care for the coating. The parquet canvas is afraid of moisture, scratches and large loads. In general, it is worthwhile to care about beauty.

• But there are also benefits from the parquet board - you can lay it yourself. The engineering canvas needs only the hands of the master, And this is additional expenses. At the same time, the calculation needs much more time than at the junction of “in the castle”.
• By the way, about spending - they are in about one price segment. But sometimes an engineering board is more expensive, moreover, 1.5-2 times. Although it completely depends on the proposed characteristics.
• And the most important aspect - Disassemble the engineering board is simply impossible! A complete restoration of both the canvas and the lower layer is needed.

In conclusion, it is worth noting - in any case, check the manufacturer. After all, it is he who will talk about quality. You can buy an engineering board from an unreliable company, which will quickly fail even in comparison with a budget parquet canvas.

Video: Engineering and Parquet board: Comparison