Figures from snow for kindergarten: how to make Santa Claus out of snow, Snow Maiden, house, needle, minion, dog, penguin, stove, tank, fortress, bun, goddess, hedgehog, octopus, frog, hare, owl, bear , Smesharikov, Christmas tree, snowman, Olaf?

Features of modeling figures of fabulous and animated heroes, animals and houses from snow.

Winter brings us not only frosts, but also fun games with children in the fresh air.

Perhaps it’s hard to find fun more interesting than modeling the figures of fabulous and animated heroes from wet snow. This is both fun and fantasy, and does not allow the child to freeze.

In addition to fascinating classes in the premises of the house or kindergarten, adults and children are happy to spend time on the street.

It is interesting that you can sculpt from snow from almost the first frozen precipitation. The main thing is to prepare the material correctly, namely moisturize and let it freeze a little.

Let's talk more about the features of the creation of different figures, transport, houses and a cartoon of heroes from the snow with your own hand, as well as about safe ways of staining them.

How to make the figure of Santa Claus from snow with your own hands: scheme, photo, description

To fly out the figure of frost from the snow, act like this:

• prepare the base from compressed wet snow or work with a finished block
• stock up for modeling - shovels, scrapers, hacksaw, gloves
• have a picture-scheme of Santa Claus at hand to withstand the proportions of his figure
• start carving snow as it is convenient for you - either from above or below
• pay special attention to working on a hat, eyebrows, nose, fur coat with a high collar, staff
• wrap the result with wet snow. To do this, dissolve the snow in a bucket of water to the consistency of the dough
• leave the figure freeze for the night/day
• pull the lines with thiner tools
• to perceive a fairy -tale character, decorate it with paints

Below we add an action scheme for modeling a matter of frost.

And a number of photos of ready -made figures:

How to make a snow figure in the form of a Snow Maiden?

Prepare:

• subjects for sculptural trends listed in the section above
• picture
• plasticine mini-figure to determine the types of work with snow
• paints, for example, gouache or food for painting a figure

Procedure:

• decide on the growth and size of the future Snow Maiden. The higher it is, the more you will need to add snow in the process,
• if the snow on the street is cervical, roll a large ball as for a snowman,
• when you decided to blind the figure of the Snow Maiden in human height or higher, roll 2-3 balls and put them on each other,
• cross the transitions with snow, adjust the lines,
• in order for the frame to strengthen, leave it not a few hours/day. Additionally strengthen it with wet snow around the perimeter,
• carry out the details of the appearance with a scraper, spatula, graters,
• spray the prepared paint, highlighting small details of appearance, for example, cheeks, nose, lips, eyes,
• if part of the Snow Maiden has broken off while working, flip places with wet snow and continue,
• check out with a plasticine version and a figure of a figure.

How to make a snowman, Olaf from the snow?

As for modeling from snow, a classic snowman, you are unlikely to have any difficulties.

Capture 3 balls of different diameters, put them on each other and adjust the result. Add attributes to the snowman:

• nose
• hat
• hands-sticks
• legs in felt boots

Olaf's body structure is a similar plus:

• hair on the head from sticks
• the shape of the head is similar to an elongated rhombus

In some cases, the authors of snow sculptures sculse Olaf without legs.

In any case, find a successful layout and hold it at hand while creating a sculpture from snow.

How to make a Christmas tree with jewelry?

• First, think through the shape of the Christmas tree, its parameters and dimensions.
• Prepare the tools - a spatula, sandpaper, a small shovel, watering can.
• Choose the right place for the location of the Christmas tree.

The first way is from the balls:

• roll balls of small diameter
• put them in a circle of tiers
• each next should be the previous
• in the intervals, lay snow for the structure of the structure
• give the necessary outlines the tools
• color the result with paints diluted in the water

The second method is from a snowball:

• pin a mountain of snow and make it with water
• in a couple of days, increase the slide height with snow and soak it too with water
• repeat the actions 2-3 times, depending on the planned height

The third way is from garbage bags:

• Fill green bags with snow so that it easily rolls inside.
• Put them with tiers.

Using decorations, use:

• paint
• christmas tree toys and paper garlands
• old plastic toys

How to make a dog out of snow?

• Decide on the size, position of her body in space, details of the appearance of the future snowy dog.
• Stock up on paper.

If you decide to fashion a small four -legged friend, for example, lying on the ground, then:

• pin the snow so as to simulate a lying dog
• moisten it with water water
• skate a small ball and put where the head should be
• sell her features of a real dog, especially pay attention to your ears

For sculpting large dogs you will suit you 2 ways:

• from moistened snow
• by rolling balls

The second method is suitable for sculptors with minimal skills. Roll up 2 balls and treat the snow slightly for similarity to the figure of a dog.

The first method involves preparing the material before modeling.

• Form a mountain of snow and pour it with water.
• Let me lie down for a day or second.
• Repeat the actions while you achieve the desired height.
• Cut up excess snow and create the figure of the dog.
• Add it either color or highlight the details of the appearance in a different way. For example, insert your eyes-ugli.

How to make a house from snow?

Snow houses are different in form and purpose:

• i hut
• lock
• fortress
• needle
• decorative decoration
• place for children's games

The main ways of modeling the snowy house are two:

• rolling balls
• cut squares

In both cases, use wet snow.

To build a house from snow act like this:

• find an open place to build
• clean it from snow
• roll small balls or cut squares in size, for example, 40x40x10
• lay out the first row of compacted materials, it will be the foundation
• then build up the height of the walls to the desired level
• remove the excesses of the snow that protrudes with your hands or sculptures

If the house is intended for children's games, insulate it inside with polyethylene. To do this, lay the material on the floor and along the walls.

How to make a needle from snow?

This type of snow building has a dome shape, and the walls are folded from cut blocks.

Choose a well -coded snow or prepare it, filling it with water.

The more blocks, the less actions you will perform the construction of the needle. Ideal parameters of one block 90x38x20 cm.

However, remember that the needle is narrowing from the bottom, and therefore the parameters of the blocks will change.

Of the features of the building, we note the following:

• lay a strong foundation from the first row of blocks
• perform small bevels along the lower edge on the inside of each brick
• build the needle while inside the house
• after you put the last brick, cut out the entrance, for example, with a knife
• all joints inside are scraped with snow and grind
• gently lay bricks to form a dome above you
• complete a short corridor-entry to a cut hole
• if the needle was built for children's games, be sure to insulate its floor and walls with polyethylene
• open or add if desired

Mignon from snow

To blind the figure of a minion of snow is quite simple. His figure is a rectangle with rounded corners on top.

Make your hair out of branches, and hands from plastic inflexible pipes. Tie gloves to the ends.

The most interesting part is coloring the finished snow blank.

Penguin from snow

It will not be difficult to fly out of snow, since you will not need a frame and laying the material in it.

• Fold the mountain of snow with a shovel and moisturize if it is dry.
• Using sculpting tools or hands, give the block the desired shapes and bends.
• Then apply paint or give it to the children. They will gladly fulfill this creative task.

Snow stove

The snow stove will help you make a frame method. Just take the boards or boxes more authentic so that it turns out like a real one.

In order for the finished stove to move, put the blocks of snow on the skis. Then cut out its outlines.

The final step is to apply paint in the form of an ornament and imitation of fire in the hearth.

Snow tank

The larger the tank you plan to fly out of the snow, the more material you need. And only with the help of pressing it in the form and further installation on each other can you give shape to the figure.

Then act in accordance with the pattern of the finished tank. Cut the loophole, gun, wheels and caterpillars.

The more it will be the details of the tank, it is more interesting for children to play with it.

Fortress from snow

Build the fortresses in any way convenient for you. However, more durable and tall - from snowy bricks.

Close the joints between them with wet material.

Consult with children before starting the creation of the fortress. Find out the purpose of its construction and purpose. Its height, clarity of lines, the presence of sculptures in the walls and teeth on the upper row of bricks depend on this.

Kolobok from snow

This fairy -tale character to create with your own hands can do any architect even with minimal experience in such a case.

• Roll up a large ball and process it around the perimeter so that it becomes round.
• Install in the place that was chosen and hand over the child to decorate the hero of the fairy tale.

God's cow of snow

So I want to see a piece of summer in winter. Why not blind God from the snow? Moreover, the costs of preparing wet snow are minimal.

Pour in the mountain of snow and ram. Then separate the head from the body and use black and red paints.

Hedgehog from snow

The hedgehog in the modeling method looks like a bun. Only thorns and elongated muzzle with a nose are added.

It is quite simple to form them - from snowballs in your palms. Give them a cone -shaped shape and put on the upper part of the kolobok.

Add paints or coals for the eyes and tip of the nose.

Snow Smeshariki

The principle of their creation is similar to the considered in the section above.

Thanks to the ball, which is both the body and the head, the time for the modeling of any hero of the Smeshariki is minimal. Most of it will go to coloring.

Snake from snow

For a snow snake, take only very wet snow and spread on the ground. To increase the strength of the material, leave the workpiece for a day.

If you want to place a snake on a tree branch, put it out gradually in any order or from:

• tail to the head
• heads to the tail

Next, insert the eyes-stone or coals, change the color of the snake’s body to anyone you like.

Octopus from snow

Such a bright representative of marine abysses is easy to fly out with children. They will have fun to help you rake the snow for the body of the octopus, and then lay out the slides-plots.

And the most fun process is to color the tentacles at the ends of the tentacles.

Frog from snow

A fairy -tale heroine will remind the children of the warmth of the season and miracles. However, children can not do without the help of adults.

Help them like this:

• pour wet snow into the frame
• press it
• give the shape of the frog

Children will perform the last phase of creating this character on their own. After all, this is the application of paint and the addition of parts, for example, arrows.

A hare of snow

Hares are the inhabitants of the forest at any time of the year. If you show imagination, then you can blind a cheerful beast, for example, boldly standing by the tree.

And for small crumbs, an ordinary, cast -up on the principle of a snowman is also interesting. The main thing is that the ears are in place.

Owl of snow

It is quite difficult to fly out, since the sculptor should show the nuances of her body - feathers, wings, paws.

Therefore, invite professional artists or architects. So that they create a similar masterpiece for children.

Bear from snow

The principle of making a bear from snow is similar to a dog.

However, the delight and funny games of children around the snow bear will delight you many times.

How and what to paint a figure from snow in kindergarten?

Active classes with snow in the open air in kindergarten imply painting ready -made sculptures.

The best options for children's fun are:

• gouache
• food coloring

Dilute them in a large amount of water and pour them into a container with a spray on the neck. If the figure has small details, then hand the child a brush so that it smashes a paint from a bottle around the perimeter of the desired zone.

So, we examined the features of the creation of various figures from snow, have mastered several time -tested techniques, decided on safe means for painting ready -made creations.

Encourage any of the figures considered or create your own. And remember that the children will remember these fun before their old age.

Funny to you and interesting snow sculptures!

Video: How to blind different figures from snow?