What to do if shoes squeeze? How to stretch tight shoes at home? How to soften the skin on shoes?

• Probably, every person is familiar with a feeling of disappointment because new fashion shoes begin to squeeze their legs painfully. This problem can cause a lot of inconvenience
• In the process of walking, the feet begin to swell, burn and become covered with blisters. Most often this is due to the fact that we do not quite choose the size of shoes
• Measuring a new pair of shoes, people pay attention exclusively to their length, but they think about their width and rise last. And since our feet inevitably swell in time, the shoes begin to dig into the skin of the legs
• And, although these unpleasant sensations do not allow you to think about nothing else, except for the pain that shoes cause, some people do not take any action
• They patiently wait for the material from which the stylish pair of shoes is sewn to stretch on their own. But since this process is quite slow, it can take at least a month for this. If you want to speed up this procedure, then try to use our tips

How to stretch leather shoes at home?

Leather shoes can be adjusted to the desired size quite easily. Of course, this does not mean that you can very much change its volumes, but still, with the right approach, you will be able to make it so that it perfectly tightens the foot.

But before starting to conduct examiners on your new purchase, wait a few days. Usually, after two or three days, leather shoes (if, of course, high-quality) will disperse on their own and take the desired shape. But if you wore ankle boots every day for a week, and discomfort has not gone anywhere, then you need to stretch them a little.

Consider all the methods described below are suitable exclusively for genuine leather models. Shoes made from other materials these methods can ruin irrevocably.

Tips that will help stretch leather shoes:
• Steam. Hold the ankle boots above the steam until droplets of drum appear on them. Then put them on your feet with warm socks and walk at least 1 hour
• newspapers. Wet the old press with water (it should not drain) and tightly puts it in shoes. Leave them to dry at room temperature. In no case do not carry out drying under direct sunlight or battery. This can lead to deformation of shoes
• Cold. This method is most suitable for boots or boots. Take a hermetic polyethylene heap, fill it with water, tie it thoroughly and place the boots inside. Put them in the freezer until the fluid freezes

How to spread suede shoes?

Everyone knows that suede, whether it is natural or artificial, very delicate material that is afraid of excess moisture and strong mechanical influences. Therefore, shoes sewn from this material must be chosen especially carefully. But if you nevertheless made a mistake and only at home realized that it is not enough for you, you should not get upset very much. And in this case, you can slightly increase the size.

But so suede is afraid of absolutely all liquids, then this method should be resorted only to the extreme case. If you decide to stretch the ballet shoes with water, then moisten them so that they are only wet.

Ways that will help to spread suede shoes:
• alcohol -containing liquids. They must be applied to the inner surface of the shoes and wait until they dry. During the day, the procedure can be carried out 2-3 times
• Wet sock. Moisten them in warm water, squeeze it well, put on your feet and train your suede shoes. If possible, at least 1.5-2 hours
• Paraffin. We rub the inside of the shoes with a warm paraffin (make sure that it does not get on the vile part) and leave it there for 9-12 hours

How to stretch artificial leather shoes?

Ballets and shoes sewn from artificial materials are practically drunk. This is due to the fact that the leatherette is not very elastic and afraid of sudden temperature differences. Therefore, you need to adjust them to the right size with a carefully. In this case, it is better not to use strong chemicals, cold and high temperature.

All these methods will lead to the fact that ugly stains and cracks will appear on the ballet shoes. And this beauty, so to speak, has nothing to close. But still there are several methods that will help you make such shoes more convenient.

So:
• Lubricate the inner surface of the shoes with ordinary petroleum jelly and leave it there for 2-3 hours. After time, remove the remains with a dry rag and look a little in them
• Rub the ballet shoes with humid household soap and wait 2 hours. Remove everything with a wet sponge, put on woolen socks and walk in shoes until they completely dry
• Berm Feng and direct the warm air inside the shoes. After the shoes warm up well (they should be tangibly warm), wear them and walk until they cool completely. Repeat this manipulation several times

Is it possible to spread rubber shoes and rubber boots?

Whoever says what, but if you are a happy owner of pure rubber boots, then you will definitely not be able to stretch them at home. All that you can do in this case is to give them to the shoe workshop. The shoemaker can try to increase from the size with special blocks, gradually stretching the rubber.

But in this case, do not hope for a very noticeable result, usually rubber shoes minimally change its initial parameters. But the boots made of polyvinyl chloride can quite be stretched a little. In this case, you will only need to be patient and regularly carry out the desired manipulation.

Recommendations for stretching rubber boots:
• Grain. Pour it into the shoes and pour it with water. It should slightly cover the grain. Leave it there for a day, and then remove it and let your boots dry naturally
• boiling water. Boil water and pour it into rubber boots. When the water becomes at room temperature, pour it. Dress 2-3 pairs of woolen socks on your feet and train still warm boots. Walk in them until they cool
• ammonia. Several times a day, process the inner surface of the boots with ammonia and walk around the room. But be prepared for the fact that this method will begin to give a positive result only after 6-7 processing

How to make shoes softer?

We all know how hard the legs get used to new shoes. While she gains the desired shape on the feet inevitably painful wounds, gratitude and corns. Some women knowing such features of their legs try to immediately seal problem areas with a plaster.

But unfortunately, this method does not always help to avoid negative consequences. After all, if you bought ballet shoes sewn from rather dense material, then until you make it softer, your problems will not disappear anywhere. How to quickly soften a new pair of shoes, we tell me a little lower.

So:
• Essential oils. Such manipulation is best spent at night. Take any essential oil and carefully apply it to the inner surface of the shoes. By morning, it will completely absorb, and you can calmly put them on work. After 2-3 such procedures, the skin will become softer and elastic
• A hammer. This method is suitable for shoes sewn from genuine leather. Take a hammer and carefully tap it to the problem areas. This will help make the material more supple and it will be much easier for it to take the shape of the foot
• Socks. Moisten woolen socks with alcohol, dress uncomfortable shoes and walk in them around the house until it hurts your feet. If possible, then rub the manipulation at least twice a day

How to quickly spread shoes with a pad?

Before you start stretching shoes with this method, be sure to carefully look at what material they are sewn from. After all, if they were made of small pieces or, for example, under the skin there is a cloth fabric or PVC, then a strong mechanical effect can lead to irreversible gaps that will no longer be restored.

But if your shoes are sewn from genuine leather or suede, then try to increase its size using special sliding pads. They can be bought in almost any shoe store or make them to order. After they help you get rid of problems, you can use them for drying and storing ballets and ankle boots.

Recommendations on the use of pads:
• Clean shoes from dust a little dry
• insert the sliding block inside the shoe
• Using the lever, increase the size so that the material from which the shoes are made slightly
• Leave everything in this position for 24 hours
• The next day, spread the pads a little more and wait for the day again
• Try on the shoes. If discomfort is felt in some places, then repeat the manipulation again

A tool for softening and stretching shoes

But however, folk methods are not effective, it is better to stretch new shoes with professional means. In this case, you will definitely be able to avoid unnecessary damage and spread shoes in a fairly short time. All that you will need to do is regularly treat the skin or suck in special substances, and wait until it dries.

If you prefer such a tool as Stretch Genie, then you do not even have to catch your new thing. Included with a spray, special spacers are sold, which will help stretch the material in the right places.

Professional means for stretching shoes:
• Foam stretching. Spray inside the shoes, put on socks and walk around the room. After half an hour, remove the remains of the product with a damp sponge
• Soft strips. They are glued to problem areas and protect the leg from rubbing. They can be used along with a special spray to soften the skin
• Torpoons. They are glued to the back and help him acquire the right shape. In addition, these silicone bookmarks will help protect your feet from corns

Video: How to stretch tight shoes and spread shoes?