How to finish the ceiling in the bathroom? How to install a ceiling in a bathroom made of plastic panels, polystyrene foam plates, drywall, glass -fruit sheet with your own hands?

Similar instructions for those who still do not know how to finish the ceiling in the bathroom.

The bathroom is a place in which we most often go in order to relieve fatigue after a hard day's day. It is probably difficult to find a person who would not agree that the bath, filled with warm water and fragrant foam literally in a matter of minutes, returns moral and physical forces to the body.

But in order for a person to receive positive emotions from visiting the bathroom, it is fundamentally important that it has the perfect finish, not only gender and walls, but also the ceiling.

It is very important that it is beautiful and that it is important correctly. After all, just like the baths in our apartments are not very large, then the groomed covered with cracks and mold the ceiling will very much put pressure on the psyche and interfere with the person to relax.

Floor decoration in the bathroom: what materials should be excluded

The bath is the most humid room in the apartment, so it is extremely important that the material that the ceiling will be made can easily cope with a large number of fumes.

In addition, the walls and ceiling are constantly amenable to sharp temperature differences. All this leads to the fact that the decorative coating faster than usual loses its protective and visual qualities.

In view of the foregoing, we can conclude that there are materials that are better not to use for finishing the ceiling in the bathroom.

So:

1. Lime. It brings high humidity very poorly and literally a couple of months after application is covered with ugly yellow spots and cracks
2. Chalk. It is an ideal environment for the propagation of the fungus and mold. In addition, such a finish requires a fairly frequent update
3. Oil paint. It also very quickly loses its decorative properties. Such a ceiling will delight you for no more than three months, and then crack and begin to crumble
4. Wallpaper. This type of finish categorically does not tolerate increased humidity, therefore, even if you buy the highest quality and expensive material, it will still fall off very quickly
5. Ordinary drywall and chipboard. These materials absorb moisture very well, and this leads to the fact that they deform and become a nursery of harmful fungi

Modern finishing materials

• If our mothers and grandmothers had no choice and they had to finish the ceiling with such impractical materials as lime and oil paint, then we can afford to make a completely safe and visually attractive room out of the bathroom

• Now in construction stores you can find quite a lot of finishing materials that meet all the requirements of a modern person. He calmly crossed moisture, not to be afraid of high and low temperatures, and that is important, have an antibacterial coating that prevent the appearance of fungus and mold

• But still, modern materials are not good and high-quality, you still need to take into account some of the nuances of the finish, because if you are in your room, for example, very low ceilings, then you are unlikely to install a hinged or rack system

• Since their installation requires a special frame, it will reduce the height of the room even larger. Therefore, I will go to the store for buying, consider not only your preferences and financial position, but both the size and the height of the premises in which you will make repairs

Materials for finishing the ceiling in the bathroom:

1. Stretch and suspended ceilings
2. Foam polystyrene plates
3. Glass -fruited sheets
4. Rack and cassette ceilings
5. Water -dispersive and latex paint

How to paint the ceiling in the bathroom with water -dispersive or latex paint?

If you are a little constrained in the funds and you do not have money for installing the suspension system, then you can paint the ceiling with paint. Just use not oil and enamel for decoration, but better and more modern products. For finishing the ceiling of the bathroom, latex and water -dispersive paint is ideal.

Both types of these paints and varnishes contain additives that reduce the negative effect of moisture on them and do not allow pathogenic fungi to multiply.

Particular coating rules:

• Carefully remove the old coating from the ceiling and be sure to conduct antipolorian surface treatment. For these purposes, you can use special purchased products or just prepare a concentrated solution of water and acetic acid

• After the ceiling dries, fill out all the small cracks and fossa that are on it, and if required, seize the surface leveling. You can do this ordinary putty

• Когда шпаклевка полностью просохнет потолок надо будет зашкурить (это поможет убрать оставшиеся неровности), а затем обработать специальной грунтовкой

• As soon as the primer is completely dry, you can take paint and apply it to the ceiling with an ordinary brush or roller. After 2-3 hours, apply another layer of paintwork, only this time make strokes strictly perpendicular to the previous one. Such a little trick will help you make the color of the ceiling perfectly even

Method of finishing the ceiling of the bathroom: Polyteral foam plates

Polyteral foam plates are another inexpensive and visually attractive material, which can quickly transform the bathroom. The only thing you should take into account that they should be glued to the surface perfectly.

Therefore, before starting directly to decorate, be sure to do high -quality alignment of the surface of the ceiling. If you decide to save at this stage of work, then the final result will not please you with either your appearance or durability.

So:

• Take the tile and apply a special glue on it. It must be applied both to the center of the tile and around its perimeter. For greater strength, you can make several strokes diagonally

• The first tile must be glued to the center of the ceiling. This must be done as accurately and evenly as possible. If you do not guess at least a little with its placement, then all subsequent tiles will not be mounted correctly correctly

• The finishing material must be carefully pressed to the surface of the ceiling and hold it in this position literally a couple of seconds. During this time, the glue will have time to grab a little and you can start placing the next tile. If glue performed on the surface of the finishing material, then it must be removed as quickly as possible. If you leave him there for at least half an hour, it will be no longer possible to do it

• All subsequent tiles are glued to the ceiling parallel to the first. They must be placed in such a way that large gaps do not form between them. Also consider that this material cannot be very much pressed. If you have a very strong mechanical effect on it, then dents will remain on it, which can not be removed

Method of finishing the ceiling in the bathroom: SML (glass -luminous leaf)

Glass -fruited sheet is an ideal tool for decorating the ceiling space in the bathroom. Due to the fact that this material has a fairly flexible structure, it can easily take the desired shape and that it is important to hide all the minor disadvantages of the old coating under it. It is installed almost in the same way as drywall ceilings, except taking into account some nuances.

So:

• Before starting to mount the SML, it is necessary to carry out the anti -leaved treatment of all surfaces in the bathroom and be sure to dry it well

• During the fixing of the sheets, make sure that there is always a gap equal to half of the thickness of the glass -luminous leaf between them

• If you need to cut off a sheet of a certain size, then put the SML on the wooden surface with the smooth side up, make cuts with a sharp knife, and then gently pressing, break off the desired piece

• Before finally fixing the sheet with screws, be sure to plunge the hole. This will help to hide the hats of self -tapping screws inside the finishing material and as a result you will get a surface on which a finish coating can be applied without additional leveling

Glamagnetic sheet Technical characteristics application

Glomagnium sheets can be used not only for finishing the ceiling in the bathroom. This material can be used quite calmly in other construction work. With its help, you can align the walls, build partitions, make arches and niches in the walls. Therefore, if you want to transform your bathroom quickly and inexpensively, then the glass -deck sheets are what you need.

The most pleasant thing is that this material in its characteristics is inferior to such a moisture -resistant drywall advertised in our country. SML has a much better density and practically does not swell when water enters it. Also, the glass -deck sheets have a very good heat conductivity. Therefore, this material is not afraid of temperature changes, which means that it will delight you with its perfect look for a long time.

Advantages of SML:

• Has good soundproofing properties
• During installation on the sheets, cracks do not appear
• Not afraid of minus temperatures
• Has a fairly small weight
• Easily and quickly mounted

Reed and cassette ceilings in the bathroom with your own hands

Rheck and cassette ceilings are quite simply mounted, so even a novice builder can easily cope with this task. It is this hotel material that people most often use to decorate the ceiling space in the bathroom.

The versatility made them so popular. They are very durable, environmentally friendly and look equally good in rooms of any size.

Installation of the rack ceiling:

• At the first stage, conduct the installation of the guides. They must be fixed around the entire perimeter of the room. If you are not entirely sure that you can place them correctly, then use the laser level

• When the guides are installed, begin to mount the suspensions. It is best to fix them with screws with dowels in the openings pre -drilled. Periodically check whether the suspensions are placed in level

• At the next stage, proceed to the installation of supporting tires. It should be placed at a distance of 90 cm from each other

• Next, free the slats from the protective film, cut them into pieces of the desired size, carefully insert them into the guides and snap on the traverse. Continue the installation of rails until the entire surface of the ceiling coating is closed

Stretch and hanging ceilings for the bathroom

A stretch ceiling is a design of a certain type, consisting of a durable frame and a canvas made of polyvinyl chloride. The main advantage of such a finish is its waterproof. Even if there will be a lot of pair in the bathroom, he will not be able to penetrate the ceiling canvases inside.

So the material from which the stretch ceiling is made by special water -repellent substance, the water will simply be collected in large drops. After hygiene procedures, it will be enough to wipe the ceiling surface with a clean dry rag, and it will look perfect again.

Rules for installing a stretch ceiling:

• First of all, determine the exact place for the bagette mount. To do this, make a small indentation from the main ceiling. Depending on the type of stretch fabric, it can fluctuate from 1.5 to 5 centimeters.

• Then, using a laser level, apply on the ceiling surface of the line and begin to attach a baguette to them. They must be fixed with self-tapping screws with a step of 15-20 centimeters

• At this stage, you also need to lay the wiring and make outputs for all lamps that will be mounted in the bathroom

• When it will be done with this, put in the center of the room the tensioned shell and with a special clamp, fix it in any corner convenient for you

• We fix the rest of the ends in the same method, turn on the heat gun and begin to heat the tensioning blade. When it heats up to 40 degrees carefully insert it into the baguits

• After the canvas is securely fixed, we close the installation location with a ceiling plinth and go to the installation of lighting

Ceiling in the bathroom made of plastic panels

Plastic panels are good because after installation they will not require any special attention. All that you will need to do this once a week wash their surface with any soap solution.

But the most pleasant thing is that you do not have to carry out any waterproofing work to install them. Since the plastic panels are sealed, they will not pass moisture inside, which means that you can definitely forget about the fungus and mold in this case.

Installation rules for plastic panels:

• We make markings on the old ceiling coating and using the level set a wooden frame.
• In order to make the frame more rigid, we amplify it with additional rails. They must be fixed at a distance of 1 meter from each other
• At the next stage, we take not very long dowels and fixes plastic guides to the frame to the frame
• We measure the distance from one wall to the other, cut off the lining and insert it slightly into the guides. Do not forget to fix each panel with special steel brackets
• We attach the rest of the resting in the same way, pressing it with the top to the previous

DIY gypsum -cardboard ceiling

The plasterboard ceiling for ours has long been strange for a long time. Its practicality, efficiency and versatility made it the most popular environment of inexpensive and high -quality finishing materials. But since you plan to repair the bathroom, it should be borne in mind that in this case ordinary drywall will not suit you.

In rooms with high humidity, the finish should be carried out with moisture -resistant material. Therefore, do not try to save and immediately buy drywall, which will easily transfer the constant effect of wet air.

Installation recommendations:

• Determine at what level the plasterboard ceiling will be mounted (you can do this using a laser) and indicate the exact places of fixation of the suspensions

• Next, we begin to mount a metal frame. First, install the profile around the perimeter of the room, and then go to the strengthening of the resulting structure. All steel details must be reliably fixed self -cutting

• We cut the drywall sheets into pieces of the desired size and with the help of a thinning we attach them to the steel frame

• When the entire surface of the main ceiling is closed by sheets, you can proceed to putty seams and screws. Wait until the mass dries, and then grind and primer

• At the final stage, a finish coating is applied to a plasterboard ceiling in several layers

DIY mirror ceiling in the bathroom

If you are not embarrassed in finances and are ready to tinker a little, then make a mirror ceiling in your bathroom. Such at first glance, a simple finish will quite transform the smallest and most dark room. This original ceiling coating will definitely help make the bathroom visually higher and more.

And if earlier in specialized stores it was possible to buy only a mirror stretch ceiling, now even more interesting and beautiful variations of this finish have appeared.

So:

1. Furniture coating. Non -standard slabs are attached to the pre -made frame. This form of mirrors allows you to maximize the volume of the room
2. Ceiling Amstrong. Such a finish is mounted on the basis of a T-shaped frame, transverse profiles and suspensions that support them. In this case, the mirrors are inserted into the formed cells
3. Fact ceiling. This type of mirror coating also provides for the installation of a durable frame, but unlike the previous method, the tiles will be attached to it using special glue

With your own cheap ceiling in the bathroom

Another good option for finishing the ceiling space in the bathroom is a glass ceiling. This material is definitely not afraid of moisture, sharp temperature changes and frequent household chemical treatment.

Moreover, such a finish will delight you with a beautiful aesthetic look. If desired, you can mount an interesting backlight for her or order a real stained glass.

The method of installing a glass ceiling:

• First of all, make the frame on the perimeter of the bathroom
• Then, from contrasting racks, mount the cells into which the glasses will be inserted
• Next, carefully insert the glass of the desired size into the cell and attach it with a special screw or a narrow rail
• Continue in the same spirit until all empty cells are closed with glass

Video: Plastic for finishing the ceiling of the bathroom and kitchen. Secrets of plastic selection