DIY DIY booth for a dog: dimensions, drawings, choice of materials, photo

DIY booth instructions.

Content

A booth for a dog is a kind of house for a four -haired friend and a way to warm up, take refuge from the rain if the animal lives on the street. Depending on the dimensions of the dog, the parameters of the structure are selected, and drawings are also built. In this article we will tell you how to build a dog booth.

DIY booth sizes for dog

At the initial stage, it is necessary to deal with the parameters, that is, what the perimeter and area of \u200b\u200bthe structure will be. These data directly depend on the dimensions and weight of a four -haired friend. You can find out more about the parameters in the table.

DIY dog booth: drawings

Many will think, the larger the animal, the more the structure is needed. It is believed that in a spacious structure, the pet feels much more comfortable, but this is an erroneous opinion. The more dimensions, the faster the dog will freeze in it. It does not matter if you live in the southern regions, but important parameters, if it is the northern region. It is always cold in a large house, the dog can hurt. Consider the physique of the animal, adding 5-10 cm to each, this is enough to place the funerals inside in the cold, and an old, warm blanket. A booth for a dog with your own hands, drawings for which are presented below, is not built according to the puppy parameters.

The task is complicated if you create a house for a puppy, since taking in its dimensions there is no need to take into account. After a while, the dog will simply grow and grow a house. We'll have to build it again. The average dimensions characteristic of this breed are taken into account. They can be found on the sites of dog lovers or higher in the table. You need to navigate according to these data, adding 5 cm to each of the parameters.

How to make a dog booth: Roof choice

It is possible to choose what roof will be. Easy to execute - single -to -shuttered, set under a slope so that sediment flows into the house and moisture does not fall into the house.

How to make a dog for a dog, the choice of a roof:

However, a triangular roof will be an ideal option, but its construction requires some skills. For especially sophisticated owners of the doggies, the structure with a gable model will be an ideal option.
In the attic you can make a hole or small window, you can store food, toys for the dog. This will become a kind of compartment for storing the necessary goods and products for caring for four -ladered friends.
Find out what material the house will be made of. Accessible- this is coniferous wood. A pine will be an ideal option, as it is characterized by a low price, and with good resistance to wetting.

Dog for dogs from pallets: Instructions

The structure can be built from pallets, or pallets. Often they are used to transport goods, boxes and movement of goods in warehouses. If you think that with the help of pallets you will be able to make housing very quickly without taking them apart, then you are mistaken.

A booth for a dog from pallets, instructions:

Initially, it will be necessary to disassemble them into building material, separately on boards and bars. The pallet itself consists of bars, and stuffed on them with equal gaps, boards.
Only one unusual pallet is suitable to make the bottom. It is with its installation that construction begins. Next, a frame is filled around the bottom around the perimeter. For this, the bars available due to the dismantling of pallets are just used.
After installing 4 beams, the upper part of the frame is filled. When these lags are fixed using nails, you can start a crate, stuffing boards on the base.

DIY dog booth: photo

Installation of a gable roof is somewhat more complicated. The easy option is to install a single -sided model. The top is built separately from the frame.

Peculiarities:

To do this, the boards of the required size are cut and stuffed on the frame. Only after that is the upper part of the roof is filled. It is worth decorating the roof with some kind of stable material.
If you have a desire to save, you can use a regular professionalist. It is attached to the prepared crate. Remember that most of the heat, as well as the cold, comes in and goes through the top.
Therefore, its insulation is mandatory. At the stage of installation of the box, it is also necessary to provide for the insulation of the bottom. The basis should be raised in order to prevent freezing of the structure.

What to make a simple dog for a dog with your own hands: Choosing a material

In the rooms with a roof consisting of two parts, heat rises up and dissipates. Thus, the dog can freeze. To prevent this from happening, be sure to provide the ceiling in the gable roof, and do not forget to insulate it. The advantage of this structure is space. It is advisable to put a straw to a four -headed friend in frost. Do not get very carried away by thermal insulation, since four -lap friends themselves have fluffy wool, which will protect from frost and cold weather.

What to make a simple dog for a dog with your own hands:

For the construction of the structure, it is not necessary to use full -fledged boards and wooden beams. You can find materials that can easily become building.
For this, old furniture, windows, as well as the remains of building materials after repair work in the house are suitable. With the help of old furniture, you can also build a good, full -fledged conuer.
It is distinguished by strength, reliability.

How to insulate do -it -yourself dog booth for dogs?

It is imperative to devote time to the insulation. Usually, mineral wool, or ordinary polystyrene, is laid for these purposes. It is laid in recesses, with glue is attached to the walls.

Peculiarities:

The next layer of boards is filled on top of the thermal insulation. Try to choose large bars that allow you to hide a sheet of thermal insulation material.
These materials are cheap, easily fit between the bars, and will really help to warm the structure.
Remember that it is necessary to insulate not only walls, another floor and ceiling. It is for these reasons that the building with a gable roof is always colder than with a single -sided one.

If a In your region, frosts, snow, frosty winter are observed, thermal insulation is a prerequisite.

How to warm a booth for dogs made of wood with your own hands:

Mineral wool
Styrofoam

Sometimes as a thermal insulation, felt, foam rubber, and expanded clay are used.

A booth for a small dog with your own hands with a removable roof

The building with a single -toe roof is quite convenient, since in sultry weather the dogs like to relax on top, and observe their territory.

A booth for a small dog with your own hands with a removable roof:

Remember that it is very simple to build such a roof, it is enough to use a USB sheet for this, and attach a profileist on top. The choice of roofing material depends on which is available. Since construction is often accompanied by the use of residues after the installation of a barn or the main construction.
Styrofoam- this is Good material for thermal insulation, but it can contribute to the effect of the greenhouse. Condensate that will accumulate on the walls can accumulate inside. This is not always convenient for the animal, especially in the cold, when the hole closes with a curtain. Dog in this structure is difficult to breathe.
Remember that an ideal option for arranging a roof is a professional, or ordinary galvanizing. Such materials look worse than tiles, but at the same time they will serve for a long time.
Much longer than roofing from bitumen tile or roofing material. The dog can bite such a roof, thereby harm its health. Therefore, the choice of roof depends not only on your preferences, but based on the safety of the dog. For convenience, you can attach the loops, with which the top will be leaning back.

Build a removable top or design that easily leans. The fact is that over time, a large amount of food, wool, organic residues accumulate in the structure. They can contribute to decay, or growth of fungus, which will worsen the state of health of the animal. Therefore, you need to take care of cleaning the house and available methods of its implementation. Focus not on aesthetics, but on convenience for a pet. The structure should not be too cumbersome, with a two -way, winding roof and decorative panels. For the dog, nothing, and can interfere with normal stay inside the structure.

Dog booth: recommendations for construction and reviews of dog breeders

Construction recommendations and reviews:

Alexey, 40 years old. I live in my own house, I have a labrador. He started it 2 years ago. He did not work at that time, so he could afford the construction of a booth. I spent about 4 days. I made from old pallets, I think that it turned out pretty pretty. The structure insulated with foam. He made the roof a single -shout, covered it with bitumen tiles. In vain did it, the dog bites part of the roof. It’s good that I was not poisoned. He was forced to remove this roof and screw the usual galvanizing. He selected the size, but did not take into account the dimensions of the dog, at that time was a puppy. It was oriented based on the average rock data.

Alexey, 35 years old. I have a small poodle, initially we lived in the apartment, but then we moved to our own house. The kid lived with us in the apartment, but there is a lot of free space in his own house, there is a territory near the house, decided to build his own housing for him. Surprisingly, she really liked the dog, she is happy to rest there with sultry days, in the shade. I made from old furniture. I had a chest of drawers that I broke, and then built a booth. He made a roof from a profiled sheet. He remained after repair in the barn. Very pleased, Konura does not flow. I did not insulate anything, we are sorry for Nensi, in winter lives with us in the house.

Oleg, 27 years old. We have a German shepherd, we brought her for a long time. The house is large, but we have a baks pest, so it often digs vegetables in the garden. We decided to make an aviary and a booth for her. Made from brick. I think this material is not the best, but at that time construction was carried out, so there were a lot of such building materials. I did not insulate anything inside. We will have to somehow take care of insulation, Konura is cold. Wing with slate. In general, it turned out not bad, but it seems to me that it is cramped in it.

Remember that housing for the animal, it should be comfortable. Some owners provide for such purposes special awnings or verandas. In fact, they divide the booth into two parts, one of which is left open, and the second is closed by installing the roof. The dog in sultry weather can rest in this part, and not go into the structure.