Satin roses. Flowers from satin ribbons with your own hands step by step instructions. Bouquet of ribbons

Satin roses. Flowers from satin ribbons with your own hands step by step instructions. Bouquet of ribbons

The article will tell you how to make roses from a satin tape with various techniques, and you can also find out the nuances and features of working with a satin ribbon in it.

The beauty of the rose is unique, but it is easy to try to create a similar flower with your own hands and this does not require significant costs - at the peak of popularity, flowers made of satin ribbons. How to create a beautiful hair decoration, a bouquet for the bride, interior detail or brooch with amazing and sophisticated roses - you will find out by reading this article and studying the instructions on how to make flowers from ribbons.

DIY roses from satin ribbons

Not everyone can afford beautiful fresh flowers that every day will decorate the house every day, and sometimes you want a small spring corner in the house and at least a small one, but a rose. The way out of the situation will be a rose created from a simple and affordable material - Atlas.

Satin ribbons are often used in needlework

To create a satin rose, there is no large costs. All that is needed in the process of work:

  • satin ribbons or a cut of fabric
  • wire
  • corrugated paper
  • glue-Main
  • solder and brillon of the desired size
  • scissors
  • gelatin
  • vata
  • small pillow (you can use a pad for needles)
Boil for needlework

The atlas must be soaked in a gelatin solution and dried so that the fabric becomes supple. After the atlas dries, you can start work.

Satin roses

Observing the sequence of work and instructions set forth in the instructions, you can quickly and easily make an exquisite satin rose:

  • Make stencils for petals from any paper
Paper preparation
  • By applying the stencil to the satin ribbon, cut out 20 petals and two foundations of flower
Petals
  • Pick up a brush of the desired size
Bulk
  • Moisten a small section of the fabric and squeeze well - it will be needed in order to wipe the petals before giving them a form
Preparation of petals
  • Put a wet petal on the pillow and with the help of a brush, give the shape, as shown in the photo
Shaping
  • Put it aside and conduct similar manipulations with all the other petals.
  • Give a curved shape and the bases of the flower
The base of the flower
  • Using the tool, continue the petals on the other side
Formation of the petal
  • All petals should purchase such a look as shown in the photo
Petals should have this type
  • Repeat the same actions with whisk
Venko
  • Wrap the wire with corrugated paper, forming the stem of the rose. After that, wind a small piece of cotton wool on the stem obtained - this will be the basis of the flower, its middle
The base of the flower
  • Of the parts received, it is necessary to collect a rose. First of all, wrap the stem with cotton wool with a petal and glue its edges with glue
  • Glue the second petal so that the edge of the first
  • Glue two petals at once to the resulting workpiece
  • Glue all the petals in a circle in a pair
  • After that, glue the remaining bases of the flower in chess order
Ready flower

From the resulting flower you can make a brooch, hairpin or decorate the house. Having made several multi -colored roses, you can form a whole bouquet.

The splendor of the rose depends on the number of petals - there may be more of them than indicated in the instructions

Roses from tape 5 cm

A simpler, but no less aesthetic will be a rose made of thin tape 5 cm wide. Such flowers look more decorative than the first option and go very well with clothes, jewelry, as well as in a decorative bouquet, like interior detail.

Satin tape 5 cm

For the manufacture of a rose, you will need:

  • a satin ribbon (5 cm) of any color, but preferable red, pink or orange, as well as a green tape
  • needle and thread in the color of the tape
  • lighter
  • glue
  • scissors
  • centimeter or ruler
Roses from the tape

Instructions for the manufacture of rose from the tape:

  1. Using the ruler, measure a piece of tape 8 cm long and cut 5 pieces according to this sample
    2. Measure a piece of 13 cm long and cut 5 of these elements
    3. Using a lighter, melt the edges of the resulting pieces of the tape so that they do not disheve and have an aesthetic look
    4. Form the petals from the resulting shreds: for this, bend the two edges of the tape with a “envelope” and pin it with a pin, and then build up with a neat seam
    5. Pulling the tip of the thread, pull the petal and form 8 of them larger, by slight delay. Tie the ends of the thread with a strong knot so that the petal does not break up
    6. From the green tape, also form two petals, which will ultimately become cups of rose
    7. Go to the formation of a rose: starting with the smallest blanks, glue them with each other, trying to give the future flower the structure of the rose
    8. After that, glue the leaves, and swing all the flaws and taps sticking out from the bottom with a small piece of tape, hiding the sections

You can glue a hairpin or elastic band to the resulting flower and use this cute jewelry to create a sophisticated and elegant hairstyle.

Video: Flower from satin ribbons in 5 minutes

Roses from roses

In order to form a beautiful rose bud, a tape is required 100 cm long. The color of the tape can be very different, but the texture of the atlas must be taken into account: if the tape has a smooth shiny side and the other is the wrong side, then immediately before starting work, put it on the table like that So that the front side is below.

Flat buds

For work you will need:

  • tape (100 cm)
  • needle and thread
  • super glue or other instantly gluing glue
Volumetric roses

Work sequence:

  1. Turn the edge of the tape and make a seam. Without cutting off the thread, twist a small tube from the tape - the base of the flower
  2. Currently bending the edges of the tape, make turns around the base and fix it below with small seams
  3. So it is necessary to “wrap up” the entire tape around the base, and glue the last revolution with glue, after cutting off the thread and making a small knot. This will help to hide the seams and flaws
Nameless
The sequence of work
Nameless
Fastening can be carried out using glue

Bouquet of roses from tapes

Thanks to the simple technique of creating roses from the tape, you can only form a full -fledged bouquet of flowers in half an hour. For this, you need:

  • satin tape 5 cm wide
  • needle and thread
  • scissors
  • lighter
  • ruler
  • glue
Bouquet

The color of the satin tape from which the flowers will be formed can be anything, but for leaves the green or light green tape is most organically suitable.

Having prepared all the necessary tools and materials, you can start work:

  1. Measure pieces of tape 10 cm long and cut them with scissors. In total, 10 such flaps should turn out
  2. Carefully melt all the tips of future petals with a lighter
  3. For the manufacture of the core of the rose, take one of the pieces of the tape and put it on the table with the face (the one that is smooth and brilliant)
  4. Bend the right angle as shown in the photo
  5. Holding the resulting corner, once again wrap the right side to the left
  6. Next, make bends as indicated in the photo dotted
  7. Using a needle and thread, fix the bending point without tearing the thread
  8. Bend the left corner so that the edges coincide
  9. From the first fold, make a number of stitches to the second and pull the thread. Such cores must be made three
  10. Start creating the petals: put the flap with the front side on the table and pull the corners with a thread, as indicated in the photo. After that, tie the thread into the knot and cut the excess
  11. Such petals need to be done seven
  12. Collect the bud: wrap the bud with a petal and sew below
  13. At the creation of a half -elated rose, attach one more petal thus thus
  14. The second rose will be more magnificent - another petal should be attached to it
  15. The third rose is completely blossoming. Attach all the remaining petals to it according to the above principle
  16. Cut the green tape in half (the tape 2.5 cm wide and 12 cm long should be obtained)
  17. Fold the resulting tape so that the triangle turns out. Cut the lower corner as in the photo
  18. Combine the two cut corners of the triangle with tweezers and melt with a lighter so that they are so glued
  19. Put the bud in the resulting leaf and glue it with glue
  20. The remaining leaves must be turned inside out
  21. Combine all the elements into the composition of flowers and leaves using glue
Dashed show shows the places of bends
No need to cut off the thread
The formation of a bud
Petals
The basis must be connected to the petals
The bud is decorated with leaves
The bud is decorated with leaves
The unopened rose bud

If you want to know how to make a wedding bouquet of ribbons, then there is nothing complicated in this. The above technique is quite suitable for this.

Such a technique will create a bouquet

Canzashi flowers from satin ribbons

The manufacture of Kansashi is a pleasant lesson with benefit, because spending a little time and effort can be made a beautiful decoration for hair, which no one will have. There are many different manufacturing techniques for kanzashi from satin ribbons designed for a different level of skill, but we will look at the technique for beginners.

Kansashi

Kansashi are needed for the manufacture of roses:

  • the tape of any color
  • lighter
  • glue
  • threads and needle
  • beads
  • hair or hairpin
Hair ornament

To create a beautiful flower of the cage, you need:

  1. Cut the tape into six pieces of 6-8 cm
    2. Bend the right upper corner and fix it with a pin, do the same manipulation with the left corner
    3. Sew the resulting triangle from below and pull the thread slightly, then tie the knot and cut it
    4. Repeat the actions with all shreds to get six identical petals
    5. Connect the petals with each other with a thread
    6. In the center, sew one large or several small beads
    7. Sew the flower to the elastic band or glue it to the hairpin using glue
Such a rose will transform the hairstyle

Using the satin ribbon and your own imagination, you can create a variety of crafts and jewelry. Create, create beautiful and decorate your life and the life of people close to you with the fruits of your own creativity. Roses from satin ribbons are beautiful and original, and an unusual occupation will be a wonderful hobby for the soul.

Video: flat rose from a satin tape 2, 5 cm wide



Author:
Evaluate the article

Add a comment

Your e-mail will not be published. Mandatory fields are marked *