20 of the simplest crafts with children to school, kindergarten: instructions, description. Doll, dandelions, animals, dwarf, owl, snowman, decoration, forest corner, candle, mug, bank, heart, scarf, vase, garland, candlesticks, “capita, bird” with their own hands: schemes

It is not at all difficult to create a beautiful craft with the child. Now we will consider in more detail how.

It is not necessary to have special skills in order to make a beautiful and unusual craft. If you know certain tricks, then you can perform jewelry for the interior or gift, applying a minimum of strength and using the most affordable materials.

We offer you a list of crafts that are performed very easily and beautifully, while they look just great.

Light and beautiful craft doll: manufacturing instructions, description

Sometimes I really want to please my daughter with a new doll. But sometimes there is simply not enough finance and time in order to purchase it. Therefore, we decided to offer you to perform simple and affordable crafts. For example, knit.

Stock up for her:

Threads
Cardboard
Thin ribbon

The process of making dolls:

If you do not have a cardboard at hand, then take an old postcard. The height of the doll will depend on the size of the postcard.

Wrap the yarn on the cardboard with a good layer.
The winding that you turned out to be tied with a thread. Dimmer the place where the head of the product will be placed, glue. Wrap the thread also.
Make the doll handles. In order to make your palms, rewind your hands in the wrist area. Cut the thread where the fingers are.
Also form the body. Perform the legs as the pens did. Only they should be much longer.
Cut the strip of the ribbon so that it corresponds to the size of the head. Stick the sides of the ribbon.
Wrap the thread for curls on the palm of your hand. Cut the resulting roll in one place. Glue the curls on the head. You can make a doll even bangs.
Take multi -colored markers. Draw your nose, mouth, eyes.
Sew a doll outfit or tie a regular handkerchief that will be a cloak.

Dandelions of yarn

Such simple, but very exquisite crafts will delight both adults and children. From the old yarn you can make an air, delicate dandelion.

You will have to stock up:

Yellow threads
Green threads
Glue
Wire

The process of making dandelion from yarn:

Take yellow yarn. Wrap it on a fork used specifically for knitting. Pass the same thread into the large needle. Spend in the center of the workpiece.
Carefully smear the line with glue. Remove the yarn from the fork, roll in the form of a roller.
Wrap the thread in the center so that the workpiece gets a special shape. Slue glue in the center on top. Wait a little so that the glue is dry.
Cut the workpiece in the center. On the first flowers, cut the loops, carefully comb, so that dandelions turn out to be fluffy.
Cut green threads into pieces so that their length is 40 mm. Pass the pieces across, but not in the center. Step back by about 1 \\ 3.
Cut the top, trim it. Spend again so that the line is parallel to the first line.
Smother the inside of the flower with glue, glue the cups. Wrap it with the same yarn that made a line. Fix the tips. Leave not time to the workpiece to dry.
Wind green yarn on the wire, lubricating it with glue.
Tie the leaves using a knitting hook. Or perform leaflets from colored cardboard.

CREASE OF COMPLE FROM

Have you decided to please the baby with a new toy, making it from improvised materials and spending a minimum of time? You will not need to sew and sew something.

You just make some and cuts and stocch:

Felt
Solomes for juice
Beads
Small buttons

The process of manufacturing tissue animals:

For one mouse, cut 2 parts. One detail - it will be the body of the mouse. Cut the sharp muzzle on one side into the parts. Cut the ears so that they look like 8.
Take a fabric of a different color. Cut a small circle for a nose from it, 2 mugs for the ears. Attach these details using glue.
Perform 4 cuts on the body. Place 2 cut vertically on the back of the head. 2 cut in the zone of a lump for straw. Attach your ears, pass the straw through special holes.
Glue the beads or buttons instead of the eye.

Crafts Dwarf from cones

Bills are the most ideal material from which wonderful crafts are obtained. In addition, your children will be interested in creating various animals, fairy -tale heroes, birds and many others.

For a gnome, stock up:

Cones
Light plasticine
Felt
Fleece
Glue

Production process:

Roll a small ball from plasticine. The tip of the brush in plasticine recesses for the nose, mouth, eye in plasticine. Fill in the recess with plasticine the corresponding shade.
Put your head on the bump. From the fabric you need to cut a triangle. Fight the sides of the figure so that you have a cone. Pour a hat on your head on your head.
Take the remains of the material. Make mittens from it. Glue the mittens to the bump using plasticine.

Owl craft

For the next craft, you will need to stock up:

Acorns - 2 pcs.
Yellow paint
Fetr of several colors

The process of manufacturing owls from cones:

Make a face made of felt, also eyes and wings
Next, continue to decorate the bird. Attach the head and wings to the bump.

Crafts Snowman from cones

So that your snowman is fabulous and sweet, stock up:

Bump
Dense material
Toothpicks - 2 pcs.
Cotton wool
Sticks from seamry - 2 pcs.
White paint
Wire

Production process:

Paint the bump. Take it to the side so that it dries carefully.
Cut the scarf from checkered material, tie it on the character’s neck. Make headphones from felt. Attach the element to the snowman's head.
Make a nose from plasticine, mouth. Attach the hero's face.
Take the wire. Wrap it with a ribbon. Attach to the bump - these will be the hands of the snowman.
Give a toothpick into the character of the character by gluing cotton wool on them below.
Paint the filling sticks. After drying, attach the sticks at the bottom of the snowman as skis.

Forest corner

Stock up:

An ordinary old DIC CD - 1 pc.
Plasticine
Bump
A cap from the acorns
Glue
Paints

The process of manufacturing a forest corner:

Take care of the manufacturing process by calling the whole family. There will be a job for everyone. Someone will do a hedgehog, someone will be able to decorate the disk. Trust the child painting the Christmas tree.

Make mushrooms from plasticine. Make each detail separately, and then fasten them.
As a basis, take plasticine or polymer clay. Paint the base with dark paint.
After drying the base, in the back of the animal, stick the flakes from the cones. Place the hat on the head of the hedgehog.
Attach your eyes, nose, mouth. Place a wand in the form of a cane in the hand of a hedgehog. In the other hand - a basket filled with mushrooms.
Put the animal on the stand.

Simple decoration

In winter, when the sun pleases us with its rays not so often, I want to make such a craft that can please everyone.

Stock up for the product:

Colored paper
Cardboard
Glue
Ribbon

The process of manufacturing jewelry for mood:

Cut 3 blanks for flowers each. 2 blanks - cut out of paper of the same color. Each of these blanks will consist of 6 petals. Put one blank on the table, glue the circle on top of the circle, with the holes for the eyes and the mouth applied in advance.
Paint the eyes with a dark marker. Bend each petal forward.
Make a stalk from dense cardboard. Attach the prepared part on top. Then - a flower with petals.
Bend green paper, draw a rounded line. Then cut the leaf along this line.
So make several flowers. Dig them with a bright ribbon.

Craft autumn candle

You will have to stock up:

Leaflets
Glue
Sponge or brush
Jar
Thread

The manufacturing process of the autumn candle:

Wipe the container with alcohol to eliminate fat traces.
Cover the jar with glue.
Take straight leaves. Garnish the jar with them.
Cover the leaves with transparent varnish (optional).
To make the craft more beautiful, tie the neck with a decorative thread, put a candle inside.

A decorated mug

For work, you need to stock up:

Oil markers of different colors
Cardboard

Production process:

Take the cardboard. From it, make a stencil of absolutely any ornament or letter.
Put the resulting stencil on the mug. Next, spend around this stencil using multi -colored markers.
Around the circuit, make a large number of points from different markers.

Multi -colored jars

Stock up in advance:

Glass capacity
Alcohol
Acrylic paints
Decorating elements

The manufacturing process of multi -colored jars:

Clean the container using alcohol.
Cover the jar with paints of any color.
When the paint dries, apply any inscription to the jar using a marker.
Insert beautiful flowers into the resulting vase.

Heart from wine traffic jams

A simple but beautiful craft. Stock up for her:

Traffic jams
Paper
Pencils
Glue

The process of making the heart from wine traffic jams:

Draw the shape of the future product on paper. In our case, it will be an exquisite heart.
Glue the traffic jams to the paper. First, glue the heart in the bottom of the cork inside the picture. At the same time, make sure that the cork is strictly lying along the contour of the ornament.
Continue glue each cork.
When the product is ready, cut the paper.
Paint your heart with red paint.

Old knitted shirt scarf

Take for crafts:

Old knitwear shirt
Scissors
Threads
Needles

Sharf manufacturing process:

Cut from the shirt on both sides of the edge. The width of the shirt should be approximately 35 cm.
Also cut a little fabric below and at the top.
Sew the resulting halves from the inside.
The scarf is completely ready.

Bright vase

Stock up:

Paints
A bottle

The manufacturing process of a bright vase:

Pour paint into the container. You can mix several shades at once, thereby receiving an unusual color.
Pour the paint into the bottle. Do this using a syringe.
Turn the bottle so that the liquid inside covers the entire surface of the glass.
As soon as you paint the container, turn it over so that the paint flows completely.
After drying the paint, add water to the vase, insert the bouquet.

Paper garland

Stock up:

Paper cups
Ordinary garland
Paints

The manufacturing process of paper garland:

In each cup, make a hole in the form of a cross.
Insert the bulb from the garland into each hole.
Paint the cups with colorful colors.
Decorate the room received by the craft or the Christmas tree.

Multi -colored candlesticks

The work will be performed from:

Wide glass
Narrow glass
Glue
Food dye
Candles

Cumper preparation process:

Place a small glass in the one that is larger. Fix it inside using glue. Drill the glue to the bottom of a small container.
Pour the liquid into the gap that forms between two glasses. Paint the liquid in advance by any dye.
Place a candle inside a small glass.

Mini-welding from a light bulb

You can give such a craft even for your birthday.

For manufacture, stock up:

Light bulb
Wire
Glue

The manufacturing process of mini-welding:

Using pliers, remove the bottom of the spiral from the lamp.
Remove the excess glass. Be very careful at the same time.
Take a plastic lid as a base. Attach a paw to it. If you want to hang the product, then attach the wire to the light bulb.
Complicate the work - just add the LED.

"Capitane" of threads

Stock up for work:

Color cardboard
Ball
Glue
Threads

The process of manufacturing a capita from threads:

Inflate the ball. Tie it.
Pour glue into the dishes. Dimmer the thread in the gap completely.
Wrap the thread randomly on the surface of the ball.
Wait when the thread dries.
Burn the ball.
Decorate with various elements.

Children's toy

Buy in advance:

Flour
Balloon
Bright threads

The process of manufacturing a children's toy:

Take the ball. Using a watering can, pour flour into the ball.
Carefully compact the flour inside the ball.
Tie a ball with a strong thread.
Draw your eyes.
Glue colorful curls on top, making them from threads.

Bird crafts from fabric

Various stitched birds can become an original present. Start working with a small chicken. It sews easily, besides you will spend a minimum of time.

Stock up for crafts:

Template
Fabric
Threads
Thick threads

The process of manufacturing a fabric bird:

Take the template the simplest in the form of an oval.
From the template, make 2 identical halves of the future bird. Fold the material in half.
A tail will be located behind the product. Make it from the threads, collecting it in a bundle.
Make a scallop from bright scarlet threads.
Sew the wings on the sides, cutting out of a completely different material. Preferably contrasting.
Sew the beak. Cut it from dense material.
Below (optional), sew the elastic band. Put a surprise inside.

If you do not plan to put a surprise inside, then fill the product with cotton wool. Then sew the bottom of the chicken, sew the loop and hang the bird on the wall.