20 best topiarys. The most unusual topiarys for the wedding, birthday, anniversary, holiday

20 best topiarys. The most unusual topiarys for the wedding, birthday, anniversary, holiday

The secrets of manufacturing 20 types of toprians with step -by -step instructions and video lessons have been disclosed.

The history of the origin of art topiary stretches into ancient times and was a figured haircut of green plants. The intricate figures of trees could be observed in the gardens of the Roman nobility, the original form of which was given by court gardeners-rabies.

Modern topiary is a miniature copy of trees and bushes, and only on the imagination of a skilled florist depends on what shape of the crown he will give his own tree. Topiary is a tree of happiness that has again gained its popularity in modern European floristry.

Topiatricians for a wedding with your own hands

You can make topiary for a wedding with your own hands. To begin with, read the ideas of forms of wedding topiary in our gallery.

Is it not true, the ideas are just charming? Can you imagine the faces of the newlyweds if you present them as a gift “Wedding Tree of Happiness”? Or maybe your family is planned a celebration, and you can independently make beautiful jewelry for the wedding table, while surprising not only the original idea, but also with your skill.

For example, we offer you an interesting wedding decor in the form of topiary, on which you do not have to spend a lot of money and effort. Please prepare the following materials:

  • Original vazon pot
  • A twig for the barrel
  • Gypsum
  • Thermocles
  • School
  • Beads
  • Beads
  • Cotton wheels
  • Green paper

So, let's get down to work.

  • Our wedding tree will consist of roses that we will make from ordinary cotton pads at the rate of one disk - one rose
  • We add two sides of the disk to the center so that we get a wide edge on the one hand, and on the other - sharp and in the center we fasten it with a scholarship
  • Now carefully expand the wide edge outside, and your first white rose bud was born in your hands
  • Do the same with other disks in the same way - the number of roses depends on it so wide your ball

  • Let's start preparing the crown for the wedding tree of happiness. To create it, you can use polystyrene foam, crumpled into a ball of newspapers
  • The main thing is that the material for the base is not heavy. Wrap the ball with a white sheet of paper on top and fix it with glue to the prepared branch, which in your case will serve as a barrel
  • Glue the ball to the base of the trunk by thermoclay
  • The next step is to glue roses. You need to glue them densely, pressed tightly to each other, so that the basis is not even visible

  • At this stage of work, you need to take fortress paper and cut out small squares from it, which will serve as small leaves. Glue them with PVA glue

  • Finally, put white beads with hot glue on a bouquet in a chaotic bouquet
  • It's time to arrange a pot
  • For this purpose, a beautiful small vessel or a jogurt jar is perfect for a beautiful small size
  • Pour dry gypsum into the container and pour it with water until the consistency of thick sour cream
  • Gently, in the center, we will insert a tree of happiness and let it dry well. Ideally, you need to leave it overnight

  • The next day we will begin to decorate the tree trunk. We put on white beads on the thread and fix the beads under the crown of the tree. We wrap the trunk with a spiral and fix the beads at the base of the tree with glue. We fall asleep with a layer of small beads
  • Depending on which pot for the tree you picked up, you can come up with a decoration for a wedding theme. White organza is ideal
  • Die it with a bow and your wedding topiary is ready

Topiary on the glass master class

If you make a surprise for the wedding, then let it do it entirely - give it to a beautiful wedding topiary also glasses for the bride and groom. But the glasses will not be simple, but super interesting.

After all, you will do topiary on glasses with your own hands. And this means that you will stick all your soul and love in them, while wanting the bride to the bride for many happy and funny years in strong love.

Video: Master class wedding glasses with your own hands

Topiary for March 8

  • The holiday of March 8 is considered female. At the same time, a joyful mood is noted for everyone, regardless of gender and age. Holiday, it itself brings joy and in order to strengthen it, it is customary to give interesting gifts
  • At all times, men gave women flowers-be it a beautifully decorated bouquet or flowers in pots. But if you want to pleasantly surprise your woman, you can use the idea of \u200b\u200btopiary
  • Moreover, there are many options for festive topiary, and you can always choose the one that touches your beloved heart

Topiary from rose napkins step -by -step instructions

So, let's get down to work - we will create roses.

  • In order to create this magnificent beauty, we will prepare the napkins of a certain color
  • In their free time from work, we will begin to turn them into rose buds. We cut each napkin into 4 parts
  • We take one part of the napkins and fold it in such a way as shown in the photo. That is, not in half, one third
  • We do the same with the rest of the parts. For a bud of roses, you will need 2 napkins. And again, you can adjust the value of buds yourself

  • Now we form a bud by winding. We form each petal with fingers, giving the bud in a beautiful shape. This is what you should get as a result.

  • The finished buds of roses from napkins are tightly glued to the ball.

  • For topiary for the day of lovers, you can use white and red napkins for roses, and decorate the design with hearts and an arrow of Amur
  • For example, this option for making roses can be noted

  • On the women's day on March 8, buds of any color are suitable. The main thing is to make it from the heart and with love, and decorate the topiary itself with decor elements, which will correspond to the holiday

Topiary for the New Year

Topiary for the New Year should symbolize the solemnity of the event. We have already talked about what topiary is and what are the basic principles of its manufacture.

But what is topiary for the New Year? You have already guessed - it is customary to make wishes on the New Year. And if you decide to make a New Year tree of happiness with your own hands, then you will have all the possibilities to securely secure your desire with persistent glue.

Before starting manufacturing, you need to decide on its shape. New Year's topiary can have a traditionally round shape, but you can give it a figure shape, for example, the shape of a Christmas tree.

We will consider the option of topiary from Christmas balls. You will need to prepare:

  1. Christmas balls of silver or golden color (you can combine the colors of the balls)
  2. Foam for the base
  3. Wand
  4. Pot
  5. Foam for the ball
  6. New Year's design elements - cones, decorative berries and fruits
  7. Glue
  • If you selected a pot for the New Year's theme, you can leave it in the form that it is now. In another case, the pot should initially decorate with a satin fabric and fix it to the base of the pot with bilateral tape
  • In the inside of the pot, immediately place the foam, which will serve as a reliable support for your topiary. In the middle of the oasis, fix the barrel-it can be an ordinary stick wrapped in a satin ribbon or a cardboard base from under the food foil or film
  • At this stage, to the top of the trunk of the tree of happiness, fix the foam, after making it the shape of a ball. So the moment came when we with our own hands will form the crown of a tree. In our case, this is New Year's toys-shara. Each separate ball put on toothpicks and glue them at the base. Now tightly insert toothpicks with balls into a ball.
  • If you use large balls, then the gaps between them can be filled with small balls and decorate with beads and tinsel
  • So that your design holds well, we recommend gluing the balls at the end of the work

Do not be afraid to turn on your imagination, add or change the elements at your discretion. The main rule is that they are combined with each other in color!

DIY Christmas topiary

Soon after the celebration of the New Year, a Christmas holiday comes. Naturally, you can use your New Year's topiary for Christmas. But! All you know very well that Christmas is always associated with red, white and green. Therefore, if you decide to make another topiary, then use the scenery of these shades.

Topiary of fresh and juicy strawberries in the form of a Christmas tree. You can use this delicious strawberry decor not only for Christmas, but also for any holiday, solemn buffet or bank.

To make a Christmas tree of happiness in the form of a Christmas tree, you will need to prepare:

  • Foam cone
  • Food film or foil
  • Vase
  • Fresh leaves of mint, basil or salad
  • Chocolate
  • Strawberries - 2 kg
  • Sugar powder
  • Cannon,
  • Toothpicks
  • Bows for decoration

So, let's start an exciting process.

  • First, reliably strengthen the cone from foam to the base, using hot glue for this. Now wrap the cone-barrel of the future fruit Christmas tree with food film or foil
  • Thoroughly interrupt the strawberries and take only healthy rafts with pointed ends, approximately the same size

Lay out on the table all the necessary elements for work:

  1. Toothpicks
  2. Chocolate
  3. Berries of blackberries
  4. Strawberries without green leaves
  5. Floristic pins
  • Start work from below, carefully in a circle. In this case, you need to rotate not a cone, but the base. Dip each strawberries into the melted chocolate, put it on a toothpick and attach it to the cone
  • Close the gaps between strawberries with mint or basil leaves using floristic pins. Try to attach leaves at a distance of 7-8 cm from each other
  • Also, in the intervals between strawberries, you can insert blackberry berries that will give your tree an even more original look
  • The top of the Christmas topiary decorate with karambole or you can cut the Christmas star from mango or pineapple. If you do not find either one or the other, then you can also decorate the top as an original bow
  • Before serving, sprinkle strawberries with powdered sugar, which will give your tree a more festive view with the effect of snow

Topiatricians from banknotes

A lot of enthusiasm and pleasant emotions will cause a birthday gift in the form of topiary from money spear - a real money tree !!!

To make such a magnificent gift, you will need:

  1. Thermic mesh, PVA glue
  2. Newspapers and threads
  3. Wooden skewers
  4. Napkin
  5. Leg-split
  6. Gypsum
  7. Paper bills
  8. Coins
  9. Sackcloth
  10. Acrylic paint gold
  11. The cord is golden
  • First, draw up the pot
  • You can take a container of sour cream, or specifically for this case, buy an original shape of a flower pot
  • The upper part of the pot paint with gold acrylic paint set it aside so that the paint is well dried
  • If there is a need, you can apply another layer of paint
  • Lubricate the rest of the pot with PVA glue and wrap it tightly with twine, fixing its tip with hot glue

How to make a ballpoint ball from a newspaper

  • Comers the newspapers into a ball, with a diameter of approximately 10 cm
  • Wrap it with an ordinary sewing thread
  • Now break the colored napkin, and grease the ball with a thin layer of glue
  • Stick 1-2 layers of napkins to the ball so that there are no threads
  • Let the glue dry well

  • Using a knife, make a hole in the ball for the future barrel
  • Take 10-15 skewers and tie them together with threads from two ends. Pour a little glue into the ball hole and immediately insert the skewers with sharp ends. Lubricate the barrel with glue and wrap it tightly with twine. The end of the twine is securely fix with glue
  • Dilute the gypsum with water to a state of thick sour cream and pour into a pot. Insert the finished barrel with a ball into the center and hold it in such a position for some time that the gypsum grabs well. Otherwise, your trunk may rush
  • After 30 minutes, you can start designing a cash tree crown.
  • While gypsum dries, prepare the blanks. To do this, you will need souvenir bills and a golden ribbon
  • Fold the bill with an accordion, tie in the middle with a golden thread, and glue the edges in the form of a disk. For your ball, you will need approximately 18-20 disks
  • Stick the discs on the ball, starting from the bottom. Your ball is ready
  • Now you can make different fans, scrolls, aircraft, etc. from the bills. Glue them in those places where you like more - the main thing is that your tree is lush and interesting
  • It remains only to decorate the stand. To do this, you can use green moss or sisal. Put a small bag of burlap under a tree, putting coins in it and tied with a golden thread from above
  • Your money tree - topiary from money banknotes, is ready. Enjoy his beauty and exquisite look

Topiary from pearls

Topiary from pearls will be an excellent decoration of the interior of your room or wedding table. There are many options for its manufacture and all of them as a selection are simply amazing. Make sure that yourself.

Topiary from sweets

Remember, we recently examined with you the option of making topiary for Christmas. To do this, we used fresh strawberries. And now the new offer is to make topiary of sweets.

Such an unusual attribute is perfect for any celebration, but first of all, on a children's holiday that will make it unusual and original. He will be able to please not only with his design, but also with internal content.

Video: Master class Bouquet of sweets

Video: Topiary of sweets on Valentine's Day

Topiary from fruit

For fruit lovers, it is not difficult to make topiary to their taste. It will not only decorate the interior of them at home, but will also remind you of a beautiful and warm summer all year round. I will tell you how to make a bright decorative topiary from fruits. By the way, in this technique you can make any fruit tree.

So, let's start the manufacture of topiary from fruits.

We will need:

  • Kashpo
  • Wires
  • Gypsum
  • Foam ball
  • Decorative leaves and apples
  • Brown acrylic paint
  • Hot glue
  • Ribbon or chain
  • Wooden skewers - 4 pcs
  • Any decor element - butterfly, bird, etc.

To begin with, from the thick wire we will form a barrel and a branch of the fruit tree. We fasten them with a thin wire.

Pour gypsum with water until a thick sour cream is formed. Pour the mixture in a pot and install the trunk of our future tree in the center.

We install a foam ball and fix it with hot glue. Once again, dilute the gypsum with water and coat the tree trunk with the resulting mass.

To give the barrel a more natural look, paint it with brown paint after the gypsum mass is completely solidified. If you like the white trunk, you can leave it so.

Now we tear off a little sisal and twist the balls.

We proceed to the design of the crown of our fruit tree.

Now let's make a swing from a chain and skewers.

We suspend it to the twig and plant an element of decor on top. In our case, this is a bird. You can show imagination and replace apples with plums or pears, pick up a different color of Sizal is your fantasy. In this technique, you can make a number of fruit trees that will overlap with their beauty and become a real decoration in your house.

Topiary of nuts and chestnuts

  • When winter is outside and you will really want to move to the world of the fairy tale "Golden Oreshka", you should think about the manufacture of a new decor in your interior - a tree of happiness from nuts
  • You can make topiary exclusively from nuts, or you can diversify them with chestnuts. But, for topiary, use only well -dried nuts and chestnuts. They can be painted in any color according to your desire and depending on the overall interior in the house
  • Topiatricians of nuts and chestnuts painted with gold or silver acrylic paint are very beautiful. By the way, such a decoration is ideal for the New Year. Check out the ideas of our needlewomen-maybe you yourself will take a note

Topiary of threads for knitting

If you are engaged in knitting, then, of course, after each of your creation you have extra threads. Diversify your creative abilities, thereby surprising your loved ones with a new hobby - a topiary of knitting threads.

The manufacturing technology of topiary in this case remains the same, while the appearance will differ in many ways. To create the original topiary, you can use multi -colored balls of threads or crochet original flowers from them, which will decorate the top of your tree of happiness.

And here is an example of what flowers you can knit yourself. Naturally, you should not adhere to an example, because, as if you are a needlewoman, you can come up with new creations yourself. It can be flowers, cones, fruits, vegetables, and even different figures of moths, birds, etc.

Flowers-Izpagata-i-rolleri-667x400

Topiary from photos inside

There is no doubt that a gift in the form of a tree of happiness with a photograph inside will not go unnoticed and will cause a lot of positive emotions in the culprit of the triumph.

It is not difficult to make it, you just need to choose the right photo and come up with the shape of a tree crown. Such topiary looks original for the Day of Lovers.

You can choose the shape of the heart, and put your photo in the middle. Intrigued? Naturally. Then you can’t interfere with anything to make such an original offer with your own hands.

Topiary from improvised means

Such a popular interior decoration as topiary, it turns out can be made from the most ordinary improvised means. As a decor, you can use coffee beans, pasta and even ordinary colored paper. By the way, the latest version is ideal for those mothers who want to accustom their child to art. For his manufacture, your child will take up great pleasure.

For its manufacture, you will need the following materials:

  • Colored paper
  • Wooden wand
  • Banch from under children's mashed potatoes
  • Maslar tape
  • PVA glue
  • Figure hole punch in the form of a flower

If you don’t have such a hole in your house, then you can attract your child to the process of cutting flowers.

So, from the newspapers we crumble the ball and wrap it with a painting tape. The end of the wooden stick is lubricated with PVA glue or the moment and immediately insert it into the ball, after making a hole in it with scissors. Using a floral hole punch, cut out a flower from multi -colored paper - you need about 100 pieces, depending on the size of the ball and the colors themselves. Now carefully bend the flower leaves to the middle. Glue them to the ball with PVA glue, pressing them to the base with the back of the pencil. We glue the whole ball in this way. A jar of children's mashed potatoes will decorate in the technique of decoupage-children love to do this. Separately, dilute the gypsum at the rate of 3: 4 with water. Pour the gypsum substance into the prepared jar, not reaching the top of 1 cm. Right in the center we insert a stick from the crown of the tree and hold it a little so that the gypsum grabs. After gypsum dries completely, you can paint it with paint and put several flowers on top of it on top. Finally we decorate our topiary with a beautiful bow.

Topiary from felt, photo

Material such as felt looks very beautiful on a tree of happiness - topiary. It turns out not only a somewhat unusual tree, but also appetizing. Some of its species strongly resemble a large candy of Chupa-Chups, which children love to enjoy so much.

You can also attract children to this process, because it is easy to work with this material. But as a result, you can get the most beautiful creations. A little flight of children's imagination and a gift for the birth of classmates, ready.

Topiatricians for beginners of satin ribbons

Which of us in childhood did not try to make roses from satin ribbons? Probably everyone. But none of us could even imagine that several such roses would help create amazing beauty of topiary.

So, satin ribbons, a little designer cunning and topiary can really decorate any celebration, become a magnificent birthday gift or for the day of lovers, serve as a decoration on a wedding table, etc. Are you inspired? Then let's get down.

Naturally, to create topiary from satin ribbons, first of all, you need to stock up on satin ribbons - select their color to your liking, depending on the nature of the holiday.

How to make roses from satin ribbons? There are several manufacturing techniques and all of them make it possible to make charming roses that are ideal for the manufacture of topiary.

  • Just do not forget to fix each of them with hot glue from below. Now let's start the manufacture of topiary. We, as a rule, will need a pot, stick, and a ball
  • We act exactly as in previous cases. We collect a structure from the ball and trunk of the future tree of happiness and begin to carefully and tightly put the prepared roses on the ball, fixing them with a drop of hot glue
  • The ball is ready, it remains to add several designer strokes and ... here is the result. Beautiful, isn't it? With such a gift, you can immediately go to your beloved girl

Sephir

Flying topiary

And for dessert, we suggest that you make a little unusual topiary - flying. It sounds unusual, but it looks interesting. I have no doubt that you just intrigued this idea and rush to find out how you can do such an original topiary with your own hands.

Is it like a figure in zero gravity? You have a lot of questions now - I'm sure of that. But, you can do it really yourself, and do not hesitate.

For the manufacture of a “soaring cup of coffee” you will need to prepare:

  • Pliers,
  • Glue gun,
  • A cup,
  • Saucer,
  • Arabica coffee,
  • Aluminum fork.

You may be surprised to see the name of the aluminum fork in the component materials. Aluminum because it is easier to bend - we need to bend it with the letter “zy”, that is, in the form of a future waterfall.

  • So, the fork was bent. Now we need to securely glue it with hot glue with one side to the saucer, and the other to the cup. For reliability from above, fix with tape
  • Now we will need foamed polyethylene, which can be found in packaging for dishes. Cut along the width of the future waterfall and glue it to the fork
  • We select large coffee grains and begin to stick them onto the tape on both sides. Make sure that there is no empty space left. Coffee grains can be glued in several layers

  • Let the glue dry well and you can proceed to the decoration. Coffee grains can be covered with a layer of varnish. But in this case, coffee will not publish its aroma. So you decide. Decorate the cup with a beautiful bow, put the cinnamon sticks on the saucer - in a word, turn on the flight of fantasies

  • You already have the basis, and the decoration in your hands. So you have already learned how to make beautiful topiarys with your own hands

Make up, offer your ideas and please with new works of your work of people close to you.

Video: Topiary from ribbons

 

 



Author:
Evaluate the article

Add a comment

Your e-mail will not be published. Mandatory fields are marked *