Ways to clean the drain filter in the washing machine.
Content
Even with proper operation, troubles may occur with a washing machine. This is quite normal, because the technique requires care and regular maintenance. This helps to increase the service life.
Where is the drain filter in the washing machine?
In most modern models, Bosch, Kandlant, Zanussi, Ardo, Ariston, with horizontal and frontal loading, this node is located on the front panel. Usually it is located in the right or left corner. At the same time, it is covered with a plastic or metal window. After opening this window, you will see a detail resembling a cork.
Signs of blockage:
- A notification of failure in the software appears on the screen
- Water almost does not flow
- The device sharply stops the washing mode
- Rinsing mode does not turn on
- The squeezing program does not turn on
- Water does not even merge
In old Bosch, Samsung, LG, Indezit, the drain filter can be under the front panel lid. In this case, you will have to remove the panel for cleaning. This is done simply, as it is fixed with plastic latches.
How to open and remove the drain filter?
You can open the window with a screwdriver or a metal ruler. It is necessary to push the circle and pull it over. After that, consider the filter. It resembles a cork. Most often, to remove it, you need to turn clockwise. Do not worry, there is a protruding part that you need to take with your fingers.
It is worth noting that there is a hose near the filter. This is a tube with which emergency drain of water is carried out. This is necessary if the pump jammed or broke out. In this case, it is necessary to drain the remaining water through this hose.
How to clean the drain filter in the washing machine: instruction, video
Cleaning is quite simple. This must be done about once a month. It is in this “garbage man” that threads, coins, paper clips and other objects that you forgot to remove from your pockets before washing accumulate. This filter helps to save the machine and protect it from damage.
Instructions:
- Open the hatch using a screwdriver or some thin and flat object.
- This hatch is hinged and attached to the car.
- When you see the cork, take it with the thumb and forefinger and turn it clockwise.
- Usually this is enough and you can remove the filter by pulling yourself. But in some models it is worth twisting to the stop.
- In old models, this filter can be fixed using a bolt. In this case, it should be unscrewed with a screwdriver.
- After these manipulations, carefully remove the filter. Please note that water can flow. This is quite normal, a small amount of water can accumulate there.
- Prepare a rag in advance to wipe the puddles. Now carefully inspect the filter.
- You need to remove all coins, hair, wool and thread from it. After that, rinse it with hot water.
- The remaining fat should be removed using an old toothbrush and soap. After cleaning, put the filter in place and close the hatch with a light press.
Video: cleaning the "garbage" filter of the washing machine
As you can see, cleaning the drain filter is quite simple. It is only necessary to open a decorative panel, extract a filter and wash it.
Video: Water does not merge
